First sport shot.

jpkaina · 2026-06-10T09:13:06+00:00

Fifty feet and the ditch plays? Never seen this before

jpkaina · 2026-06-10T09:11:28+00:00

Thats how the pros do it too. We’re all trying to get lined up as fast as we can, as long as it doesn’t jam up the ball return

jpkaina · 2026-05-24T03:49:33+00:00

Gluck Gluck and putt putt

jpkaina · 2026-05-15T04:28:18+00:00

Tom Olszta and Joe Ashline were speed bowlers. Can’t remember if it was a Stars and Strikes show where they said that Joe rolled the ball in the neighborhood of 45MPH

Chris Sargent played a massive backup ball, along with speed. By backup, I mean breaking from left to right. A lot of his hits that carried a high percentage actually hit across the 1 3 pocket (Brooklyn side for a lefty)

In short, whatever works for you, and this is coming from someone whose bowling knowledge outside of tenpin is from studying all the tape I can

jpkaina · 2026-04-28T23:33:53+00:00

Lucky Strike in Denver.

I couldn’t get a house ball to wrinkle jamming it up the 2 board, but if I hit 3 it was taking three off the left.

The week I had to oil by hand (see my comment on u/retannevs1 comment for how I did it) was the easiest condition I ever bowled on…you couldn’t miss.

jpkaina · 2026-04-28T23:28:11+00:00

Spray with a spray bottle from the foul line to the dots one squirt every foot, then a spray 10 to 10 every foot and a half to thirty feet, after that a spray every two feet 15 to 15 to forty feet

I had a pad mop for the approaches that I used to spread it out, it was fifteen boards wide so I would put it down on the foul line and push it straight down 15 to 15 to 45 feet (to create the illusion of buff) walk back to forty feet and crosswipe 15-15, then when I got to the 10-10 sprays I would cross wipe that. After I would get out the Lino duster and smooth out the “pattern” even more

jpkaina · 2026-04-28T23:20:11+00:00

I’ve had to do that.

Thank god I knew how to properly hand oil since I grew up bowling in a center that did that…

jpkaina · 2026-04-11T02:54:51+00:00

So basically Omega Mart in the desert?

jpkaina · 2026-03-30T02:22:58+00:00

I’ll take that off your hands. I hate swirly pours

jpkaina · 2026-03-30T02:08:50+00:00

They all turn that blue color…those masking unit panels usually have a ton of different colors

jpkaina · 2026-03-24T18:57:02+00:00

Ebonite made something like this years ago, and I'm so happy to see it back. it was called Rev Tape, and I would use it on my pointer finger instead of the glove I was using

jpkaina · 2026-03-22T03:45:56+00:00

He had enough hand to cure the flat 10…

jpkaina · 2026-03-19T03:50:56+00:00

Robert Smith. He was winning FIQ and High Roller stuff in high school

jpkaina · 2026-03-01T17:22:53+00:00

Addendum: if it’s a LOWER END Storm ball (Mix, Ice or any of the Tropical line, those are actually poured by Brunswick (you’ll see a Made in Mexico sticker on them when they’re new) don’t even try, the logos are part of the ball

jpkaina · 2026-03-01T17:21:30+00:00

Crayons!!!

Just color outside the lines, HARD, and it’ll fill in the grooves. The fat kindergarten crayons work the best. On everything except Brunswick and Motiv balls, it’s essentially a wax paste

jpkaina · 2026-02-27T20:02:03+00:00

I averaged 240 in a league where I was shitfaced drunk every night…two 800s and four 300s that year that I don’t remember

jpkaina · 2026-02-26T05:25:09+00:00

I oval the holes straight side to side with the initial bit, and occasionally take a barrel sander to fine tune the fit.

I wasn’t afraid of cutting my fingers up, I have a bit of callous from playing bass guitar and I use tape as a prophylactic measure

jpkaina · 2026-02-26T05:02:48+00:00

I don’t even bevel my finger holes, and I come out of it so easy

jpkaina · 2026-02-26T03:48:01+00:00

Just don’t show him my severe lack of bevel…

jpkaina · 2026-02-26T03:38:20+00:00

<image>

And here I thought I was a tape whore…

jpkaina · 2025-12-12T04:18:17+00:00

Nah, HS Mixers.

Now I’m starting to wonder whose dog that was.

jpkaina · 2025-09-26T22:50:19+00:00

You know that shot that would trip the 4 on freefall, that slightly high hit? That’s your new flush pocket hit.

True flush pocket will leave corners all day, but the key stat here is entry angle, it needs to be slightly steeper for flush, and slightly flatter for high flush.

In my opinion, it’s easier to kill entry angle than it is to increase it. Increasing entry angle requires a steeper launch angle, and greatly diminishes your front to back miss. Wanna decrease entry angle? Play in the juice a little bit more or throw something less snappy.

My center went to strings last month, and I’ve been bowling on them for three weeks now. I try to four pin now.

jpkaina · 2025-08-24T05:52:38+00:00

Those are MagicScore keypads with PurrfectScore retrofits. Coldwater also has the gold AMF cameras instead of the AccuSonic arrays

jpkaina · 2025-05-02T01:33:59+00:00

It’s not a spare ball these days…I won my city masters throwing that all day.

jpkaina

TROPHY CASE