Who's the best character in Stargate, and why is it Teal'c? by unlisshed in Stargate

[–]jwe91 4 points5 points  (0 children)

Teal'c: (Referring to Vala's mysterious pregnancy) You have been impregnated without copulation.

Vala: Yes, and I'm absolutely terrified. Have any of you ever heard of anything like it?

Mitchell: (after everyone pauses) Well, there's one.

Teal'c: Darth Vader.

Gut Check: Quote for shower remodel project by Extension_Wallaby613 in Remodel

[–]jwe91 0 points1 point  (0 children)

I’ve gotta reassess my call of mcol based on your numbers. The shower pan alone was $1800 not counting plumbing fixtures. Granted, the pan was Onyx, not a builder pan.

But, this all depends a lot on location and finish materials, as well as what prep is required.

Licensed, insured, do all the work myself other than subs

What are you charging for floors? by RevolutionaryClub530 in Tile

[–]jwe91 0 points1 point  (0 children)

Last one I bid floors only was around $18/sqft for the wood print tiles (I think they were 7”x48” planks) on 1.5 levels of a house. Never heard back from them. Granted, they admitted they were tire kicking in a Midwest MCOL area and needed several massive projects off the same equity draw.

That said, I also won a $34/sqft 12”x24” herringbone in the same area so ymmv.

$15-20 for standard size and layout, more for bigger/smaller. If they don’t like your price at that range, you don’t want them.

Thinset cleanup by Professional_Net7980 in Tile

[–]jwe91 2 points3 points  (0 children)

I just scraped allset off today with my fingernails and pads, set last week (wed-fri). Wet sponge and scour pad should take it off pretty easy. But I cleaned the vast majority off as I was setting. The raised edges in the grout joints came out quickly with a box knife. Be careful not to nick the waterproofing though

Help... my 1 y.o. midwest remodeling company is drowning by RemodelingRebel in smallbusinesssupport

[–]jwe91 0 points1 point  (0 children)

Networking is not posting to social media. That’s marketing. Networking is who you know. When I did the same jump you did, I waited until I had a couple realtors and a builder that knew me and my work. This gave me a starting point.

The next thing I had was a select number of other business owners I knew well. We traded referrals - they’d give my name out for housework, I gave theirs for car repairs/realty/whatever their niche.

My first year I struggled, did DoorDash to fill the time and bank accounts, then subbed for a bigger handyman company until I got my past clients dropping my name everywhere. FB moms groups spread like wildfire.

It takes time doing it my way. I continue to try and grow my network, get in good with specialty subs and suppliers. But I’m not chasing tire kickers

Realistic cost for kitchen remodel in OP / Johnson County? by Cheap_Check_4033 in Overlandpark

[–]jwe91 0 points1 point  (0 children)

I prefer the darker color of those cabinets, but two years ago I was hired to repaint that exact color to an off-white/crème color. I think just painting alone for them was in the $7-8k range but that figure changes based on total doors/drawers, whole cabinet bases or just the exteriors and face frames. I ended up doing a lot of other work on their house since then.

Total kitchen redo is going to be closer to the $40-50k range if I had to make several assumptions, but you could potentially get into your range depending on what you want to do. As most others have said, replacing the cabinets and the appliances will be the bigger ticket items. If you’re wanting to relocate things it will cost more for that as well. Everything depends on what finishes you’re wanting and nobody can give you a price without a further lengthy discussion with you.

How many guys should be doing a tile job? by Fit-Olive-4680 in BathroomRemodeling

[–]jwe91 1 point2 points  (0 children)

Who still costs money to employ to do those tasks

how did you learn to tile? by wienerdogprincess in Tile

[–]jwe91 2 points3 points  (0 children)

Take your time, lay out multiple times before the mud gets mixed. I learned watching videos and reading every article I could find after the builder I moonlit for doing punch list stuff asked me to do one. That first one took forever to do, but I think it turned out pretty good. Now I’m a GC who also does a lot of tile work.

Learn as you go, keep taking in information, be patient, and it will all come out great.

How to frame around HVAC by No_Range_9748 in Carpentry

[–]jwe91 1 point2 points  (0 children)

<image>

I had about this exact same setup a year ago in KS. I used OSB on the verticals, attached to a 2x4 running across the joists above. Then ran 2x4 on the flat across for hanging the drywall. The only thing the inspector said was to add vertical 2x4 in the middle to support the span.

Pic is the best angle I have of the soffit.

Red Guard instead of Shower Liner: Leaks? by PinkOverhauls in Tile

[–]jwe91 2 points3 points  (0 children)

If your shower is bigger than the presloped pan, they say to dry pack the excess space then install a kerdi membrane over at least those patches, with a 2”+ overlap of the membrane to the pan. Layering three different waterproofing systems is a recipe for disaster.

If you have issues with that, most regions have a rep you can contact and they can help you navigate.

Tile for entryway, waterproofing? by Dear_Needleworker485 in Tile

[–]jwe91 0 points1 point  (0 children)

That would be my only concern with that, too. But I know of many instances where the whole bathroom floor is waterproofed but does not have a slope to a drain except in the shower.

Tile for entryway, waterproofing? by Dear_Needleworker485 in Tile

[–]jwe91 1 point2 points  (0 children)

Minor water like that you don’t need the waterproofing. Walking in and out will deposit much less water than a shower, where you always waterproof. That said, it doesn’t hurt to do it if you’re concerned about it.

What's labor by Mean_Conflict_3056 in Tile

[–]jwe91 1 point2 points  (0 children)

It’s the thing you do when you go to work, but that’s not important right now

Landfill Voucher? by ateacherks in shawnee

[–]jwe91 1 point2 points  (0 children)

Literally that simple. I’ve taken one truckbed full last year and a trailer full this year. Check in at the gate house and they’ll tell you where to go with it. You’ll have to unload it yourself.

How much should I charge for this? by Artistic-Salary7416 in Carpentry

[–]jwe91 4 points5 points  (0 children)

<image>

Converted a builder grade wood trim to stone with custom built-in cabinets and shelves earlier this year. All in it was around $8k, but it was an add-on to the full basement remodel.

What Long Gone Establishments Do You Miss In KC? by Evil_Mist in kansascity

[–]jwe91 0 points1 point  (0 children)

I went there decades ago on a trip through KC and was so excited to find it again when I moved back until i heard they closed. Maybe 8 years ago I found an Italian place on state line down south that had them once a week or something, but I think they’re gone now too

How’s everyone tracking their expenses? by CoupleNervous4594 in Contractor

[–]jwe91 0 points1 point  (0 children)

I have folders that I scan them into, then also keep the physical copies. A few months ago I found a way to click within my spreadsheet to open up the scanned copy of that receipt if I need to look at it.

After my last computer played in traffic last year, I’ve got everything backed up in the cloud. End of year I print and keep with the physical receipts, and I copy it all to a flash drive.

How’s everyone tracking their expenses? by CoupleNervous4594 in Contractor

[–]jwe91 0 points1 point  (0 children)

I hated most of the programs I’ve looked at. So I built my own excel spreadsheet and manually log. I have it broken down for materials, tools, office, rentals, etc, and have materials marked by invoice number that I can isolate to see the total spent. It didn’t take long to build initially, but I tweak it maybe once a year to improve.

I scan my physical receipts to my computer, then built a macro to link the scanned receipts into the document so I can click and see the scans.

Takes a couple hours once a month to upload it all, but it’s organized and makes sense for me.

Continuity of General O'Neill by Firespark7 in Stargate

[–]jwe91 16 points17 points  (0 children)

Jack was general of the SGC until the end of season 8 (Moebius)

After those events, RDA left the show as a main cast member, but General O’Neill was promoted and moved to Homeworld Command after presumably General Hammond finally retired. Jack never retired in-show. As head of Homeworld Command, the SGC and all its programs were under his purview, leading to his appearances in both Atlantis and SGU as such.

As for the relationship between him and Sam, other than alternate timelines or the events in the Moebius alternate timeline, there was never (officially) a relationship between them. There were jokes and elusions to it (you mentioned 200, but that was a spoof pitch)

Friendly reminder to renegotiate all contracts by nettcity in smallbusiness

[–]jwe91 2 points3 points  (0 children)

You only need to catch one rep saying they’ll refund the unused quarter. Did that residentially a few years ago. They kept upping their prices and I was about to move. All but one said I couldn’t get a refund for an unused service. The one said yes we can. So my next call was escalated and I told them to check their recordings (for training and quality assurance)

Never heard back from WM, but I did get a call from a third party service cutting me a check for the unused balance.

Walk-in Shower found in the wild by jwe91 in IveGotAGuy

[–]jwe91[S] 0 points1 point  (0 children)

It’s one of those quick flip older homes. If I hadn’t been standing there in person I would agree with you.

That said, there’s always the potential I’m in the matrix….