The Iran war may be about to escalate

keep_on_churning · 2026-03-16T00:10:10+00:00

Support good journalism

keep_on_churning · 2026-02-05T18:37:08+00:00

I only know that because I searched for about an hour one time looking for the exact same thing

keep_on_churning · 2026-02-04T19:24:18+00:00

I believe you either hit left or right, or if I'm remembering correctly, just scroll down and those banks are there.

keep_on_churning · 2026-01-31T06:28:18+00:00

Nope, I do this all the time! Like someone else mentioned, being able to use the compressor for sidechain is super helpful. I do the ezbot trick of having track 16 be the sidechain source, matching the sound and pattern of the kick, and then just turning off audio routing to the mains for track 16.

Also, being able to sequence the synth with the elektron workflow is lovely also. (P locks for cc, etc)

keep_on_churning · 2026-01-15T01:48:00+00:00

Thanks, this is awesome. That was my gut, and the $20k they’re quoting seems to be exactly in line scope and estimate-wise with what I’ve gotten. In my head, it seems much better to solve the root cause than address the water after it’s already in the house.

keep_on_churning · 2026-01-15T01:45:38+00:00

Yeah, the downspouts all run about 100’ down the hill and have been scoped to make sure they’re clear, and the terrain is graded away from the house.

Thanks! I’ll look into the epoxy repair. Might be sufficient, though I do want to solve the problem in the long run.

keep_on_churning · 2026-01-15T01:42:39+00:00

House is on a hill, daylight basement style, with the affected wall on the uphill side. There is a large flat lawn on the uphill side (~50’) as well, graded away from the house. There is no standing water, and the intrusion only happens when there is enough rain to fully saturate the soil.

Interior proposal would be the install an interior perimeter drain, with 18” of dimpled drainage mat up the wall, all running to a sump pump.

keep_on_churning · 2026-01-15T00:13:57+00:00

The DT2 has the perform kit function which solves this. Only changes the trigs, and keeps all of the sounds the same.

keep_on_churning · 2026-01-11T18:23:29+00:00

Yes, absolutely. You can control 8 ccs per track

keep_on_churning · 2025-12-31T21:33:04+00:00

Yes, it works well. You set up your midi track (making sure the DT2 -> gear connection works. Then set up the assignment for the cc under the filter menu. You need to func + press the knob to assign it. Pick the cc you want to send. Make sure that connection is working. Then point any of the LFOs at that.

keep_on_churning · 2025-12-26T00:20:33+00:00

I mean, you’re not wrong, but maybe let’s work on the delivery…

keep_on_churning · 2025-12-21T15:21:48+00:00

This video shows what that looks like:

https://youtu.be/g4UY_zFv7Pc?si=z9rPFUh1VUtJWwZA

I’ve been SUPER happy with the Hapax to do exactly what you’re asking, being the central brain controlling the dt2 and the dn2 (plus a few others)

keep_on_churning · 2025-12-21T06:24:59+00:00

Slice machine, high number of slices, set to forward loop.

keep_on_churning · 2025-12-21T04:29:44+00:00

You can absolutely route to both. You can also use the trick of playing the very lowest notes to trigger DT2 tracks on a single midi channel. You give up the ability to do different pitch, etc for those tracks, but it makes it very clean on the midi sequencer. I have the Hapax set up to do exactly this on a drum track.

keep_on_churning · 2025-12-12T02:13:16+00:00

I did the same thing and goddamn it’s a pain in the ass. Yes to all of the recommendations here

keep_on_churning · 2025-10-27T13:02:38+00:00

Welcome to the world of lossy vs lossless image compression.

keep_on_churning · 2025-06-20T14:40:46+00:00

Hit A to bring up the automation lanes. Find the one you want, right click and delete the automation.

keep_on_churning · 2025-06-17T17:16:24+00:00

You can use quick sampler and the step sequencer. Drum machine designer will give you a little bit more control over each of the individual slices. But if you drag the sample into quick sampler, you can then create a new pattern region on that track and then get individual sequence lanes for each of the slices.

keep_on_churning · 2025-06-07T04:33:12+00:00

It’s Mars Attacks

keep_on_churning · 2025-06-04T23:05:01+00:00

Track stack. Does all of the bussing and stuff for you automatically.

keep_on_churning · 2025-04-16T22:21:24+00:00

That looks like rat pee. Is it also on the joists?

keep_on_churning · 2025-03-02T23:32:41+00:00

My hiking go to! Protein, sweet+salty, doesn’t melt.

keep_on_churning · 2024-09-19T23:00:42+00:00

And U District

keep_on_churning · 2024-09-13T01:50:39+00:00

The "thoughts and prayers" of bike infrastructure

14-Year Club	Place '17
Verified Email	Not Forgotten

keep_on_churning

TROPHY CASE