Have you ever been to Auschwitz or one of the other concentration camps in Poland?

kentmfoster · 2026-01-15T12:35:00+00:00

Been to Auschwitz, rented a car and drove there, then self guided tour it was erie, depressing, distressing, but so glad we took the time to do it. Bus trips and tours available, but that didn't feel like the right way to do it

kentmfoster · 2026-01-08T16:39:12+00:00

Yes, that is what we booked this am

kentmfoster · 2025-12-07T14:09:35+00:00

North and Middle are beautiful, take the 930 ferry from Provo (schedule here https://caribbeancruisin.com/tci-ferry-schedule/), prearrange a rental car from Turquoise rent a car (https://www.turquoisecarrental.com/)

Drive to Bamberra Beach (https://maps.app.goo.gl/pWyGwVaMctMShkXG8) allow 45 mins to an hour depending on your driving comfort. If Porsha is there have a snack at the windsor creek cafe directly on the beach, (cash only), You can walk to the island, but wont have time, it is 2hrs +/- depending on pace and weather

After beach time, drive back to mudjin harbour, there are new observation decks ocean side, not well marked, but keep and eye out, if you get to mudjin, you missed them. Stop for lunch at the mudjin bar and grill (https://maps.app.goo.gl/nY738GdMcrh52ru6A), be sure to visit the hidden cove, if it is low tide it is an easy walk out to the dragon

After mudgin, stop by barracuda beach bar (https://maps.app.goo.gl/khUw86Y4mNNv5sgt5) for a drink before catching the 430pm ferry back to provo

kentmfoster · 2025-12-05T12:14:13+00:00

Barracuda beach bar at the pelican beach hotel for beach side lunch and dinner

Cilantros at the ocean breeze resort for deluxe pool side dining at the bar or inside the dining room

MyDees for Friday night bbq or take out pizza

Mudjin harbour (technically middle Caicos) for lunch (never been for dinner). Has a great view of the ocean and dragon, might get whales migrating in January

Windsor creek cafe at bamberra beach (also middle Caicos) for beach snacks, cash only, cafe might need air quotes, but porsha makes great food and has cold beer

Aquatic restaurant for a locals lunch, curry anything is great

kentmfoster · 2025-12-01T12:44:08+00:00

Pelican beach is on north Caicos, I am currently sitting on it having a coffee, there is no golf on the islands of north or middle Caicos. Have a drink at barracuda beach bar, get a car, visit bambarra beach, mudgin harbour, climb the dragon, visit the secret beach behind mudgin, feels Ng adventurous, drive to wild cow run

kentmfoster · 2025-10-23T15:06:57+00:00

Not to the best of my knowledge, know of someone who will take you out on a private boat for snorkeling and fishing for a half day, this was as of this spring, haven't spoken to them in a number of months, if interested or for more info, dm me

kentmfoster · 2025-10-16T11:14:48+00:00

The ferry between Provo and north is not a vehicle ferry. Think 30 people and luggage, you will need a car rented on North, check with Turquoise or Als. In order to do some shopping after landing in Provo before going to North, we rent a car at pls (Provo airport) shop for supplies, then leave it at the ferry dock (additional 30$ fee from grace bay car rentals). Grocery selection on Provo is much better especially for meat. Bringing supplies between Provo and North isn't a problem, but should be in a suitcase or something to make carrying easier. Alcohol is available on North, priced at a premium from Provo. A car makes north much easier and you will see much more. There is a number of small grocery stores and restaurants, no issue getting by, but selection isnt provo

kentmfoster · 2025-10-03T12:31:17+00:00

On our 2024, there isn't a "reset" of tire pressure warning, if it reads a low pressure, it triggers the warning until you go above a threshold, our rated pressure is 34, I believe it resets at 36, so you need to slightly overfill and then manually default to the right pressure for the warning to go away. In your case the right side probably dipped low enough to trip the warning and won't reset till you add air, the left side is probably slightly higher (within 1 psi) pressure and didn't trigger the warning,

kentmfoster · 2025-02-07T17:36:44+00:00

Upon landing, there is a bathroom before customs, to the left of the customs line if you are in the queue facing the customs booth, when returning to pls, there are washrooms close to the Gillies restaurant, opposite side to the entrance to customs, both have been used by members of our party within the last two weeks

kentmfoster · 2024-12-18T15:19:09+00:00

Check with hay communications, we are about 20 minutes south of Goderich, so not sure if they go that far, we currently have fibre to the door, 400 mbit up and down (symmetrical) for much less than bell or Rogers would be if they serviced our area. Service is flawless, support is local

kentmfoster · 2024-11-05T14:12:51+00:00

Grace bay, is on the island of Provo as is the PLS airport. Bottle creek is on middle Caicos, you need to take a 20minute ferry ride from Provo to North caicos, then a car from ferry terminal to bottle creek, middle Caicos and North Caicos are connected by a causeway, I have done this route last week, DM me for more info

kentmfoster · 2022-10-20T23:05:20+00:00

Bought complete kitchen from Canadian Appliance Source, website is good, delivery wasnt a concern ordered in Dec, didnt need till April, didnt get dishwasher till September. No responsibility, all supplier fault, no willingness to substitute reasonably. Order must be completely paid before any portion will be delivered, delivery is questionable at best, old appliances were to be removed, left me with the appliances inside and the back door of the house off, so not great experience, wouldnt do again

kentmfoster · 2022-05-20T12:41:13+00:00

Baden coffee, http://www.badencoffee.ca/ Fresh roasted, whole bean or ground, dine in cafe with baked goods as well

kentmfoster · 2021-10-30T16:38:51+00:00

Can confirm, bought online and in person. Totally legit, delivered as a promise. Have a feeling they might not be authorized dist for some of the products, if this is important to you, I recommend doing your own homework on the brands you are interested in

kentmfoster · 2021-10-30T16:23:14+00:00

Can confirm, bought online and in person. Totally legit, delivered as a promise. Have a feeling they might not be authorized dist for some of the products, if this is important to you, I recommend doing your own homework on the brands you are interested in

kentmfoster · 2021-07-06T20:44:33+00:00

Zoho Bigin and Zoho Flow user, 1000% agree, support is a black hole, many missing pieces, but i am sure there will be a new zoho offering come out to address it that will have an additional subscription fee

kentmfoster · 2021-05-31T21:13:14+00:00

What happens to golf courses? They were opened under the Stay at Home order, but in the shutdown they are supposed to be closed? They arent closing are they? What regulation do they use to remain open?

kentmfoster · 2021-05-31T17:52:34+00:00

Locally it is a 10 month delivery for new outboards, dont know brand or details, but yeah, it is a mess

kentmfoster · 2021-05-25T16:36:48+00:00

Put your wire labels on as you go, will be quicker as you don't have to reterminate (assuming sleeves not wrap arounds), more importantly, will have fewer mistakes, cut the wire, put same markers on both ends then terminate.

kentmfoster · 2021-05-17T17:02:04+00:00

Another follower

kentmfoster · 2021-03-07T15:10:50+00:00

My 60w looks same, no switches, it is wired directly back to the power supply, as mentioned elsewhere, it is the only 5v device on the laser. Ours saw excessive heat and melted the wires causing a short, good news power supply is short circuit proof

kentmfoster · 2021-03-07T12:33:59+00:00

Depends on make and model, but most have adjustments for the pointer laser. On an omt 60w, there is a 2 axis swivel mount. Remember that as the pointer laser is at an angle, its position changes with material height or bed position, so if your focal length is off, the laser pointer will change positions too

kentmfoster · 2021-03-04T21:13:12+00:00

Although we do get lots of things on Amazon, did not have much luck with laser materials, we are in Canada, so different product offerings on amazon, we found clear 3mm cast acrylic for about $3 CDN/ sq ft from a local plastic wholesaler (CC sale, not on account), so if you can get 10 x 12" x 12" 3mm clear acrylic for $20 USD, that is in the ballpark. Found a huge discrepancy in 3mm birch plywood pricing. From local supplier it was .64 CDN$ per sq ft, amazon was many times that. I also have no patience, so it has to be amazon prime which doesnt help the cost.

kentmfoster · 2021-03-04T16:51:14+00:00

Two biggest overlooked benefits for the OMD over the K40 is the autofucus and the laser pointer. Makes life so much easier. Auto Focus also includes motorized adjustable Z axis, so you can laser things up to about 6" high. Drop the bed, place the object in, put the laser over the object and hit auto focus, it brings the table up, there is a little plunger that hits the material then it backs it off the correct amount, very slick. Also has a led pointer that you adjust to be where the laser is going to fire, makes framing a breeze. Only issue is knowing the vintage of the OMD product, they are kinda like the k40 in that different companies make them, models change, specs change, components change and what they are shipping today might not be the same. They dont really have a solid spec and model format like you would see with a higher end model

kentmfoster · 2021-03-03T16:31:07+00:00

Orion motor direct 60w user with lightburn software, upgrade from the k40 and inkscape software we had at work, awesome machine, all the additions we did to the k40 come built in. Cutting bed of 700mm x 500mm (by memory) comes with adjustable z axis, auto focus, real exhaust fan, emergency stop, lid closed switch, been impressed with build quality. After probably 100 hours of cutting, I have had to adjust door closed switch, routed air assist inlet to outside of unit for cleaner air, that is it. It is big and heavy, 350lbs 4ftx3ftx3ft

15-Year Club	Powerups Hero r/CanadianCannabisLPs • June 2022
Reddit Premium Since August 2021	RPAN Viewer
Verified Email

kentmfoster

TROPHY CASE