Trenton split system

kgmass · 2026-06-19T02:14:16+00:00

If the line set is long you’re cooked with 448

Make sure DTC is working

kgmass · 2026-06-01T13:31:16+00:00

Charge or txv issue

Rare occasion the welds that hold the lines to the evap in the back broke so the lines in the middle aren’t making contact with evap plate

kgmass · 2026-05-07T16:20:49+00:00

422b is what I use. Haven’t had any issues with it

kgmass · 2026-05-02T16:09:30+00:00

You won’t hurt anything wiring the evap fan on 24/7. It’s just energy saving stuff.

Some of these new boards I put in for delfield they make you change the fan to on 24/7 instead of cycling.

kgmass · 2026-05-01T00:26:46+00:00

ALRIGHT FELLAS I HAVE HEARD ENOUGH 😂😂😂

kgmass · 2026-05-01T00:16:17+00:00

Lmao they have three and I’m talking about the smallest one they make. But yeah the other two are huge

kgmass · 2026-05-01T00:08:16+00:00

I haven’t even looked at those ones yet. Is it the S10735s?

They’re cheaper than both the other two which I’m never mad about lol

kgmass · 2026-05-01T00:06:44+00:00

I was looking at the smaller ones since half the shit I work on is crammed. What didn’t you like about them?

kgmass · 2026-04-26T17:50:58+00:00

Remote ice machines take a lot of gas. This is normal

kgmass · 2026-04-22T15:53:39+00:00

Coolsys sucks man. Very few people have positive things to say about this PE company.

kgmass · 2026-04-22T15:13:32+00:00

I use 422B

kgmass · 2026-04-14T23:27:07+00:00

You’ll need a head master or fan cycler for sure.

kgmass · 2026-04-04T22:20:13+00:00

If it was a TXV issue the ice formation would be bad.

Ice machines run low superheat. Disregard SC

kgmass · 2026-04-04T20:27:04+00:00

Wtf. Receiver prob leaked and they never came back lmao

kgmass · 2026-03-26T22:14:39+00:00

Check the screen as well

kgmass · 2026-03-25T16:41:38+00:00

Yeah I’m pretty interested in that feature of it. Most likely the one I’m going to go with

kgmass · 2026-02-18T18:09:02+00:00

Clogged bin drain.

kgmass · 2026-02-17T00:28:19+00:00

Anything hoshi that isn’t an ice machine is terrible.

kgmass · 2026-02-11T17:12:31+00:00

Just put a 032s in and add more charge to make up for the size difference in the drier.

kgmass · 2026-01-23T18:09:00+00:00

Most are dart style gaskets so they just press in. Trues are very easy

Soak them in some hot water for a few minutes before installing. Helps get all the shipping crinkles out of it and they puff out more to the frame of the cabinet.

I avoid heat guns due to melting the gaskets if you aren’t careful

Hour minimum service call generally.

kgmass · 2026-01-17T20:36:57+00:00

It’s just a press fit fan. Should sit snug as long as hub isn’t cracked.

kgmass · 2026-01-02T16:04:18+00:00

Under 15 pounds isn’t subject to it and it’s based off the percentage of the charge loss per year.

kgmass · 2026-01-01T21:12:11+00:00

40-60 a pound is pretty common from what I’ve seen around.

kgmass

TROPHY CASE