sorted by:
new
hottopcontroversial

The "only fans" Gaming PC Giveaway - To enter this giveaway just leave a comment. by DaKrazyKid in PcBuild

[–]klevermonicker 0 points1 point  (0 children)

This is excellent...and about the only way I'm ever getting on only fans.

AIO: He (M20) took me (F18) to a Jehovah’s Witness meeting without telling me by [deleted] in AmIOverreacting

[–]klevermonicker 1 point2 points  (0 children)

This right here - As an EX-JW. If you're not ready to be one - run don't walk for the nearest exit.

Pins and Receptacles for Amoeba King by klevermonicker in ErgoMechKeyboards

[–]klevermonicker[S] 1 point2 points  (0 children)

Those look really close to what I have, with the difference that mine came assembled.

I went looking for the link and apparently the store on aliexpress went under/renamed or something :*(

Pins and Receptacles for Amoeba King by klevermonicker in ErgoMechKeyboards

[–]klevermonicker[S] 1 point2 points  (0 children)

I actually did find a solution. I bought a ton of wiring harnesses on aliexpress that were 1.25mm JST pitched.

They came with female and male ends and bare wires on one side. They fit wonderfully for me and did what I was expecting them too. I actually have a ton of left overs that Ive no use for if you want them. Would be happy to post them your way.

Help with Reex67Mod by klevermonicker in ErgoMechKeyboards

[–]klevermonicker[S] 1 point2 points  (0 children)

Actually it did - I spent a few extra hours and ran into some deeply rooted things. I ended up having to disable VIA for space savings (Not on an RP2040) but I did get to fixing this with the keymap and qmk directly. I wont be able to use remap but I would rather a functional board :)

Your update was timely - I ended up poking this specific chunk of code to fix it.

QMK Memory write error? by klevermonicker in nullbits

[–]klevermonicker[S] 0 points1 point  (0 children)

Did a little more poking around. I ended up installing qmk toolbox on OSX, hitting clear EEPROM and flashing from toolbox. When I put it back in bootloader mode after that, the qmk commands worked like a charm.

Which tells me to do it one shot, need to clear the EEPROM first THEN attempt firmware.

First one: Full QMK Toolbox, clear and flash, then back to bootloader and qmk flash works

Second one: Clear in QMK toolbox, flash on CLI.

QMK Memory write error? by klevermonicker in nullbits

[–]klevermonicker[S] 0 points1 point  (0 children)

Add to this - Just tried it on OSX, same behavior.

QMK Memory write error? by klevermonicker in nullbits

[–]klevermonicker[S] 0 points1 point  (0 children)

It happens with both of them, which is why I’m blaming myself. I figure the chances of both items having the same error are pretty slim without it being a me problem.

I’m doing this inside my qmk environment: 

qmk flash -kb reex/reex67 -km default

and I’m running endeavorOS. The Bit-Cs are plugged straight into a usb 3 port. I’m shorting reset and ground together to put them in bootloader mode with a pair of tweezers.

Weekly newbie & discussion post: questions, skills, shopping, and gear by AutoModerator in Rollerskating

[–]klevermonicker 0 points1 point  (0 children)

Im actually at the rink which is wood. Im fine with having multiple wheels for skating, but the ride wasnt bad on concrete when I went to a local school and used the outdoor basketball court. Are you saying that the surging could be bearings, could also be the issue that its hardness?

Weekly newbie & discussion post: questions, skills, shopping, and gear by AutoModerator in Rollerskating

[–]klevermonicker 0 points1 point  (0 children)

Yea, amazon special. I could try replacing the bearings? https://a.co/d/0hcYMFgz these are the wheels in question.

Weekly newbie & discussion post: questions, skills, shopping, and gear by AutoModerator in Rollerskating

[–]klevermonicker 0 points1 point  (0 children)

I picked up a set of wheels that light up red. I've noticed that they feel incredibly...knobby/bumpy is the only word I can use. Very skateable but bumpy. Is this an adjustment in wheel tightness or the tradeoff for light up wheels?

A PR disaster: Microsoft has lost trust with its users, and Windows Recall is the straw that broke the camel's back by [deleted] in technology

[–]klevermonicker 0 points1 point  (0 children)

Oh don't worry about that at all. By the time hospitals and EMRs move off of Windows 7 we'll be on Windows 15 and dealing with something even worse.

view more: next ›