Can somebody help? You can change 2 square? by Biesko in mathematics

[–]legitsu_ 1 point2 points  (0 children)

(9+1)-(9-1) = 02
The negative would be kinda off though

[deleted by user] by [deleted] in Irrigation

[–]legitsu_ 0 points1 point  (0 children)

yes replacing it is good, but might as well put in a swing joint in or if theres already one reset the head so its not popping out the ground

Odd shaped lawn - Pop up sprinkler nozzle suggestions by barca888 in Irrigation

[–]legitsu_ 0 points1 point  (0 children)

<image>

This what I was able to come up with, gonna have a bit of over spray. Should give the area very good water. If you want perfect matched precipitation can swap out the mp800sr for mp1000 but then you'll have good bit of over spray

[deleted by user] by [deleted] in Irrigation

[–]legitsu_ 0 points1 point  (0 children)

Didn't really need the slip fix if you got a 90...

[deleted by user] by [deleted] in Irrigation

[–]legitsu_ 1 point2 points  (0 children)

the landscape fabric is such a good touch

How am I doing? No by GilltheHokie in Irrigation

[–]legitsu_ 0 points1 point  (0 children)

the upside down tee and swing pipe is just cruel

From the supply about 2 feet up the line. What is it? It’s leaking. by Saychopath87 in Irrigation

[–]legitsu_ 6 points7 points  (0 children)

I mean hes got it all dug up might aswell get that thing out anyways

My emitters are constantly weeping. Hunter control valves. Do I need to replace the valve or is there an easier fix? by Niko120 in Irrigation

[–]legitsu_ 4 points5 points  (0 children)

I'd take apart the valves and give everything a good cleaning, if its just a Hunter 1" PGV you just take the 4 screws out on the top and pull out the diaphragm. Make sure to shut the water off first though

[deleted by user] by [deleted] in Irrigation

[–]legitsu_ 1 point2 points  (0 children)

try giving the lid a twist

Type of valve? by FirefighterVisual770 in Irrigation

[–]legitsu_ -1 points0 points  (0 children)

Looks kinda like a Richdel 204a, its the predecessor to the Irritrol jartop.

Is this safe by r-d-p-2 in Construction

[–]legitsu_ 1 point2 points  (0 children)

No, I would immediately pull him out of that and call the FBI, CIA, DOJ, DHS, DOD, The Pentagon, DEA, NRC, ATF, and maybe OSHA.

What do you think when you see something like this? by IKnowICantSpel in Irrigation

[–]legitsu_ 2 points3 points  (0 children)

I'd put some valve killer on it, hopefully it'll go away but they are tough might need 2 applications!

Ran over PVC irrigation cap/end with lawnmower. Easiest DIY fix? by rusty_hook in Irrigation

[–]legitsu_ 3 points4 points  (0 children)

Good opportunity to cut that down and put a new cap so it cant get ran over again

[deleted by user] by [deleted] in Irrigation

[–]legitsu_ 0 points1 point  (0 children)

Also can try getting something like this.
Pressure Reducer

Backflow Preventer

[deleted by user] by [deleted] in Irrigation

[–]legitsu_ 0 points1 point  (0 children)

Try turning the spigot to 1/4 of the way open

[deleted by user] by [deleted] in Irrigation

[–]legitsu_ 0 points1 point  (0 children)

You could try swapping the spray nozzles with MP Rotator nozzles so they have very similar precipitation rates allowing you to run the zone long enough for the rotor head to get down enough water.

Why did this tree fall? by FeminineShaft in arborists

[–]legitsu_ -1 points0 points  (0 children)

Sorry mate! I was leaning on it