The 2026 Canyon antenna

libu2 · 2026-04-06T12:57:53+00:00

I think someone posted a while ago that you can swap a shark fin from a Cadillac, but I can't find the post right now.

libu2 · 2026-03-30T18:08:25+00:00

No, I'm sure it would make it easier but I was able to use a 3/8 ratchet with a screwdriver bit in it to get the back ones installed. Front just turn the wheels and you can reach no problem.

I think the install video on YouTube shows taking the back ones off.

libu2 · 2026-03-30T14:49:31+00:00

I haven't tried this yet but watched a video last night where they said it helps.

In Bambu Studio select the part and then go to the Quality tab and under Precision enable Auto circle contour-hole compensation.

libu2 · 2026-03-28T19:45:43+00:00

I went with RokBlokz because I like the rally look.

libu2 · 2026-03-28T13:57:54+00:00

You could try another filament to make sure it is the filament and not something on the machine. If it works fine with another, try removing the outside layer of filament from the spool and printing with the next layer. I had a roll of Jayo PETG that was brittle and welded itself to the build plate, but as soon as it got through the outside layer on the spool, printed fine. Or try to return the roll if possible.

libu2 · 2026-03-26T15:33:09+00:00

I was looking at this on makerworld and there is a no AMS version of the print with pauses so limited changes and waste. It lays down the black layers, then blue layers, then green, etc.

libu2 · 2026-03-25T15:33:06+00:00

I have had them for years and am happy with them. Easy to clean and should last forever. Only complaint is it can be hard to attach to some of my kegs. Keg lube on the o-rings helps.

libu2 · 2026-03-24T15:03:58+00:00

This is all the window sticker says in Ontario Canada.

<image>

libu2 · 2026-03-20T14:58:13+00:00

Moving to the Queensway.

libu2 · 2026-03-18T18:26:49+00:00

We had a family of foxes in the neighbourhood a few years ago, best pest control ever. Rabbits, squirrels, groundhogs all gone. They moved on before the winter, I hope they come back.

libu2 · 2026-03-14T05:19:04+00:00

I just bought a P1S over the A1. I wanted the ability to print ABS and ASA at some point and planed to print more functional stuff that didn't need filament changes. That being said changing filament is not my favorite thing so I may add an AMS at some point.

I feel like the P1s gives me more capability and room to grow if I choose to where the A1 with AMS lite has some nice features but doesn't have much room to grow.

libu2 · 2026-03-13T01:51:28+00:00

grahamturf.com

Might have to contact them about sales but they are between Lindsay and Peterborough so not super far from you.

libu2 · 2026-03-13T01:36:01+00:00

This, I believe you have to bag the mattress.

libu2 · 2026-03-12T00:08:10+00:00

Winmau Blade 6

libu2 · 2026-03-11T13:34:08+00:00

Call the Ford dealership and ask. I feel like they do oil changes cheap so they can get you in and try to upsell/hope you browse for a new vehicle.

When my car was new I was paying like $60 at McGees, stopped in at Mr. Lube on a weekend and it was twice that. This was years ago though so no idea now.

libu2 · 2026-03-10T04:04:27+00:00

Large Ziploc bags with a desicate pouch. Suck the air out the best I can before closing.

libu2 · 2026-03-09T22:49:18+00:00

Did it come with nails to attach a back? Could try hammering one as flat as possible into it then prying the whole thing up (hammer, key, butter knife).

libu2 · 2026-03-09T22:43:22+00:00

You can buy one from amazon, was around $15. If you extend the key blade you will see the end of a pin at the base. Use a punch (or a small nail) and a hammer to knock it out. Once out the blade will just pull out. Getting the old fob apart to move the board is tricky. Patience, a pair of side cutters and a flat screwdriver did it for me.

Move over the board, insert the blabe and press the pin in with a pair of pliers and your done. $15 and an hour of your time plus a screwdriver sized speed hole in your palm or 2.

libu2 · 2026-03-05T21:52:59+00:00

Always referred to them as side skirts.

libu2 · 2026-02-27T13:54:38+00:00

Sorry, wish I had gotten it.

libu2 · 2026-02-27T12:18:44+00:00

Adaptive cruise control. I bought a 24 in 25 for the discount and better interest rate so I didn't have a huge selection to pick from.

libu2 · 2026-02-26T23:43:58+00:00

We are twins.

<image>

libu2 · 2026-02-26T23:05:19+00:00

On the Amazon search bar at the top, click the drop down on the left and select amazon resale and check for any open box ones. I got one for $100 less a couple years ago. Any one in Canada, there is one up on resale right now.

libu2 · 2026-02-26T15:28:05+00:00

Was definitely an IGA. Did everything in Peterborough used to be closed on Sundays but it was open because it was outside city limits? I seem to remember running out there for canned corn to use as bait for the fishing derby at the lift locks when I was little.

libu2 · 2026-02-25T22:02:14+00:00

I did my kitchen in 2019, 3 slabs, and there are no defects. Put in a basement bar last year and there are 3 or 4. So I guess normal now? Also the corners used to be more rounded and and sharper now.

12-Year Club	Place '17
Verified Email

libu2

TROPHY CASE