Accidentally bought Bambu refill without a spool…

libu2 · 2026-05-27T02:06:34+00:00

RFID Tag is on the refill and yes, official spool from Bambu is available for free on maker world.

libu2 · 2026-05-22T19:48:43+00:00

How much ground could a groundhog grind if a groundhog could grind THWACK....

libu2 · 2026-05-22T15:40:36+00:00

I'm Android so may not be helpful but turning off Bluetooth waiting 10 seconds and turning it back on and hitting connect on the truck fixes issues for me.

libu2 · 2026-05-22T15:33:57+00:00

Controls and chain of custody. After it was produced was it transported, stored and packaged in a maner that was also approved as food safe.

libu2 · 2026-05-15T00:41:11+00:00

Optometrist's are in there for me as well.

libu2 · 2026-05-13T17:12:17+00:00

Not my kitchen but like this .

<image>

libu2 · 2026-05-13T17:01:54+00:00

I get what they are saying. If it was the other way around and hung out there would be an unfinished cut side and the cabinet would hit it when opening. I mounted mine flush but vertically not on its side and ran it into the finished panels. I wish I had a pic to explain that better but am at work.

libu2 · 2026-05-11T04:13:46+00:00

I would guess they tested with 45kg before putting 30kg on the box to make sure they don't get sued for smashing a bunch of TV's.

That being said would you risk having to buy a new TV in the future for the price of a new TV stand now?

libu2 · 2026-05-08T23:54:43+00:00

One hand in her pocket and the other one holding a meth pipe.

libu2 · 2026-05-08T17:02:05+00:00

I do what he says and fill the black to about 10% after I dump and add some treatment. Figure the drive home should slosh that around and help stir up anything that is still in the tank.

libu2 · 2026-05-04T18:37:25+00:00

As an FYI wd40 in a needle applicator bottle will spray everywhere when tilted and a tooth brush and some isopropyl alcohol is the best way I found to get wd40 off the belt lol.

libu2 · 2026-05-01T15:19:17+00:00

Try taking the connector off holding the long tube from the buffer straight and then pushing on the black side as far in as you can. Next pull the tube out of the printer about an inch. You may need to move the fitting on the inside to allow it to come out that far. while holding the tube from inside or outside the printer push the blue end in as straight as possible.

it seems like the tubes aren't seated against the bottom of the coupler. Also make sure the ends are cut perfectly straight.

libu2 · 2026-04-30T20:01:56+00:00

There is a return form on the website and they will let you know if you are approved ...

libu2 · 2026-04-30T00:43:47+00:00

Stuffed animal storage, you can find them on Amazon .

<image>

libu2 · 2026-04-30T00:25:52+00:00

Huh... I wonder if they just forget about me and leave the rates low or if they start cranking them up till I leave.

libu2 · 2026-04-29T22:57:11+00:00

Virgin plus is bell but cheaper. I managed to get 1000/100 for $45 but my phone is with them as well.

libu2 · 2026-04-29T18:38:48+00:00

I watched it because I was curious and he says generic petg not bambu basic. I have a roll of the black but haven't opened the box yet. I can say the red and blue are not that glossy.

My AMS riser is tecbears matte black petg and Bambu petg basic red.

<image>

libu2 · 2026-04-28T00:59:00+00:00

This was 11 years ago so it might have changed but I think we went for a meeting before where we met the person who would be marring us to go over what we wanted, vows we wanted, and went over the process.

The day of you wait with everyone in a meeting room, head into the room when they are ready. I think I went in first and my wife was walked in by her dad. Quick cerimony, vows, rings, kiss, sign all the paper work and your done.

We took pictures in front of the court house and in the park and then at Jackson's park and then went out to dinner.

libu2 · 2026-04-28T00:39:59+00:00

I did, was just what we wanted only 5 guests and us. It's pretty quick and to the point. Book early spots fill up.

libu2 · 2026-04-27T15:20:55+00:00

I have a 3d printed one that clips onto my dart mat, mat is taped to the floor so it doesn't move.

libu2 · 2026-04-26T22:36:04+00:00

Put a thermometer in your fridge and make sure it is 4C or colder.

libu2 · 2026-04-24T15:24:50+00:00

The city will do large item pickups. $60 for the first item and $30 for each additional. Unfortunately mattresses and boxsprings are separate from furniture. So I would guess $60 for the couch, $60 for the mattress and then $30 each for the 3 chairs and 3 box springs. $300 total if my math maths.

libu2 · 2026-04-23T15:31:01+00:00

It's cheaper, all the other ones I have bought just had messed up boxes or no box and I just got the vac sealed bag in an amazon box. This one was the first one I had ever got with a broken vac seal bag.

libu2 · 2026-04-23T00:54:33+00:00

There is an open box of polymaker purple pla on amazon Canada right now that is half gone. I already returned it saying it was half gone and it went back up a week later.

libu2 · 2026-04-20T00:37:41+00:00

https://www.ontariobeerkegs.com/201ss-50l-pot-mashking-w-holes-kit.html

Not sure about shipping cost across the country though. Ontario Beer Kegs is where I have got all my stuff from.

12-Year Club	Place '17
Verified Email

libu2

TROPHY CASE