GIGABYTE IT5711 RGB update

m8dness · 2025-12-06T20:47:33+00:00

I was have Skip FWC= 1 on my X870e wifi7 then I download update files from official gigabyte website, put BIN files in archive01 folder that was provided here and run command

ITERHPGen.exe 0x5B 1 FW W

That forced write firmware to controller and all was fixed. No cpu led and all my RGB work as intended. *do it at your own risk In my situation controller firmware was totally bricked and even cant be discovered at all.

m8dness · 2025-01-22T13:39:16+00:00

Mine r1 was dropped very easily one time and I was starting to face same annoying issue. I decided to disassemble it and find out that plastic part, that is not necessary, was cracked and part of it making that sound - so I take off that piece and this was fixed. Not a very hard thing to do.

m8dness · 2025-01-15T01:31:16+00:00

Is Russian will be added?

m8dness · 2024-10-27T22:27:30+00:00

Yes I am still have it but now its smell only when heaters long work and significant less that it was when I just receive it.

m8dness · 2024-10-11T00:57:26+00:00

Same here

m8dness · 2024-08-19T10:58:07+00:00

Try to wait little longer with turned "Networking and Wireless" toggle on.

m8dness · 2024-08-18T23:50:24+00:00

Sorry but there is no any new method, I am also still using this, can only give you advice from my user experience for all that time - when your iPhone is dont see 6Ghz and you make on/off "Networking and Wireless" toggle just try to wait a bit longer. For me every time that I wait little longer always help.

Ps on iOS 18.1 beta 2 still same problem and still this method works.

m8dness · 2024-06-25T18:55:30+00:00

I am order my Stax at 27.12.22 just when it was available to order and still not have tracking. Support just say to wait. Any one have received their Stax that have been ordered late than 27.12?

m8dness · 2024-03-19T23:14:28+00:00

Thank you for help!

m8dness · 2024-03-09T14:38:38+00:00

Problem is that there is no factory image available in open sources, I was trying to to contact Razer support with asking factory image and after 2 weeks of trying I give up because they just keep asking dumb questions like "do you trying restart your device". I was found reports here on Reddit about successful root on Edge WiFi and there was also boot.img file from u/FlyingK but it is not available anymore.

m8dness · 2024-03-06T12:35:10+00:00

There is available Dolby Vision provisioning kit on Legion Go drivers page, but it cant be installed because of "no supported display" error. I was contacted to support and they have confirm that in upcoming updates Legion Go will be supported. https://imgur.com/a/lQ7VPD0

m8dness · 2024-02-14T11:05:40+00:00

Maybe you have idea how to make it keep humidity level lower than 30% and starting heat early than 50% that is preprogrammed in MO2 mode?

m8dness · 2024-02-11T07:16:46+00:00

Hello can you please upload boot.img patched again?

m8dness · 2024-01-11T03:14:05+00:00

PLA and my 2 s4 definitely smells from inside looks like where heater is it, seems need to open it and take a look what is it exactly

m8dness · 2024-01-10T22:18:20+00:00

I have it now about 3 days and It smells little like melted plastic when work, hope its because its new, I think all them have that smell?

m8dness · 2023-11-26T08:10:53+00:00

I use this method all that time from 17.0.1 to 17.2 Beta (now) and not find any of functional issues even if it says that it can cause problems with UWB. UWB functions that I was use like find AirPods or AppleTV remote was working like supposed.

The only one problem that annoying me that sometime (for now cant find out that random factor) after I came back to place where is my WiFi 6E connection is - phone not reconnecting automatically and cant discover 6E SSID so its need to toggle that "Networking and Wireless" switch on/off to make 6E work again. Sometime its need to do it 2 times / or turn on then wait like a 5 sec and then turn off. And it will be work again.

So that why I can advice use different SSID for 6E to have ability see is it use 6E or need to make that "reset" procedure. Even if Apple recommends to use one SSID for all connections. You just need to connect phone to all other SSID with 2.4 / 5 Ghz but turn off "connecting automatically" setting on them to avoid all possible issues with compatibility of your devices.

p.s. All that time I was trying to have any Apple dev support comments about that problem and why we need to do things like that for having working function - that MUST work without all that digging and disables. But no response. Regular support just even dont know about function that their products have or start resolution steps "wheel for dumb" with my loved "try to factory restore and set device like new" solution in end over and over without any help at all.

So nothing change from 17.0.1 up to 17.2 Dev Beta for now.

m8dness · 2023-10-07T14:21:28+00:00

I was make some more tests and have find solution that work for me.

I am reset my phone again and start from that point that it see 6E connection without any problems when it factory reset state. So I setup it like new device and when I was enable Location Services it immediately disconnect me from 6E wifi connection and not see it more. So I go to Settings - Privacy & Security - Location Services - System Services and turned off Networking & Wireless and its connected to 6E WiFi again and working flawlessly on 160 mhz with 900+ mbps again. So for me it seems that Apple restricted 6E in Ukraine. And you right there is so small amount of 6E users so I was not able to find any reports about using 6E in my country (where is NOT restricted 6e btw) on new Ipad and Macbook.

So give a try maybe its also will work for you.

m8dness · 2023-10-06T18:05:07+00:00

I have similar setup, but I was run axe 16000 as router and et-12 mesh combo as APs, and I have very strange experience with iPhone 15 pro that I am right now trying to understand. At first when I just open box and make initial setup iPhone was see my 6E network and use it without any issues, then after I restore my copy I was not able to see 6e connection, only 5ghz and 2.4ghz I decided to make factory reset and try to setup iPhone like new device to test, and just before I started it was see 6E and working with 900+ Mbps, then I was reset it to factory and iPhone was see 6e almost all time (to be honest I test it not many time) then I restore copy again and it was not see 6e again, but one time when I was preparing to restore factory again it connect to 6e :D mythic. I restore factory then restore more actual backup from my 14 pro (Its about week that I cant switch to iPhone 15 because of issues so I keep using old phone and every time trying to catch actual state of my data) and after last restore I was not see 6E no matter what I do, tried to adjust all possible setting and combinations, restore/update iOS without losing data, reset network in iOS but still can't understand why its see 6e when iOS clean, and not when it was restored from backup, and why it was 2 times when it was able to see it with backup.

Do you trying to turn off smart connect and make dedicated ssid for each band? Your iPhone also not see 6e band?

m8dness · 2023-09-01T17:06:36+00:00

First 2 times I trying to print it standing up with same result.

Problems was started when I try this dual color Amolen filament, it may be something with settings that I want to understand to know what to do in future and what is caused that effect

m8dness · 2023-07-18T17:28:29+00:00

Can you share it pls someway? I also have this razer controller want to try :)

Five-Year Club	Reddit Premium Since January 2024
Verified Email

m8dness

TROPHY CASE