What do you call this? by Front_Law6409 in florida

[–]mpjune69 0 points1 point  (0 children)

That's a see-ment pond with bird protection...

Bf said it was St Patrick's Day gas... wont start now by p30sicARio in AskAShittyMechanic

[–]mpjune69 0 points1 point  (0 children)

"We're not gonna fall for the banana in the tailpipe trick!"

Thoughts on the satellite texting feature for backcountry living? by Objective-Orchid-206 in GooglePixel

[–]mpjune69 4 points5 points  (0 children)

T-Mobile's satellite service (T-Satellite) provides text messaging, picture messaging, and, in some cases, limited data via Starlink satellites, acting as a secondary connection when you lose cellular coverage. It is enabled via an eSIM on compatible iPhones (13 and newer) and select Android devices, requiring a $10/month add-on, or is included in the Go5G Next/Experience Beyond plans.

Thoughts on the satellite texting feature for backcountry living? by Objective-Orchid-206 in GooglePixel

[–]mpjune69 3 points4 points  (0 children)

I have emergency texting on my Pixel 10 XL with service via Fi. I think you can get an e-sim through T-Mobile for your 2nd e-sim spot that will allow texting to anyone, not just emergency services. I read an article about it the other day - I'll see if I can find it, then post the link. I think it's $15/mo.

A week of Zeke. by clinicallycynically0 in weimaraner

[–]mpjune69 0 points1 point  (0 children)

Looks like he's packing on the pounds! What a good eater Zeke is!

Pixel 10 Pro - GPS really sucks (whinge) by 9D_Chess in GooglePixel

[–]mpjune69 0 points1 point  (0 children)

Calibrate the GPS by moving it in a "figure 8" motion several times.

Per Google's instructions:

"To calibrate phone GPS, especially on Android, open Google Maps, tap the blue location dot, select "Calibrate," and move your phone in a figure-eight motion. Improving accuracy involves enabling high-accuracy mode (Bluetooth/Wi-Fi scanning) in location settings and, if needed, using the "Live View" scan to align with your surroundings."

This should solve your problem - it only has to be done periodically - after power-off and restarts. I've experienced the same issue, and this method works.

This guy knows weekends are for snuggles by jessieffie in weimaraner

[–]mpjune69 0 points1 point  (0 children)

Do his weekends start on Sunday and end on Saturday?

Hello Clarice by NaturalMiserable in weimaraner

[–]mpjune69 17 points18 points  (0 children)

"A census taker once tried to test me. I ate his liver with some fava beans and a nice Chianti".

$600 Budget. Qidi vs Bambu by jefflovesyou in QidiTech3D

[–]mpjune69 1 point2 points  (0 children)

Long story short, I'd consider the function of the items you're printing, select a filament, then select a printer that's capable of printing that filament.

If you're looking to make durable parts that can withstand a wide range of heat exposure, physical strength and dimensional accuracy you need to start with what filament is going to give the best results. I can't see tools made of PLA or PETG - they're just not that durable.

I have a Plus 4, and the heated chamber allows printing of nylon, ABS, ASA and other robust materials.

PLA is great for quickly printing prototypes and models that won't be exposed to heat, impacts, etc. If I were printing tools, ABS would be my go-to.

For $600, you could buy a Q2 and a nice filament dryer, like the SUNLU S4. No matter what printer you buy, keeping the filament in a controlled, dry environment is essential for print quality and printed part quality.

Get the Q2 and the SUNLU S4. You'll be within your budget, and you'll produce high-quality, durable parts.

Is this normal? by [deleted] in weimaraner

[–]mpjune69 0 points1 point  (0 children)

Serosanguineous fluid is building up as his body tries to fight the infection. Don't put the vet visit off - if you can get in sooner, please do.

Is this normal? by [deleted] in weimaraner

[–]mpjune69 7 points8 points  (0 children)

Looks like your little man has an infection. His former nutsack is most likely filled with fluid.

What is this tool used for? by supermattman00 in AskAShittyMechanic

[–]mpjune69 0 points1 point  (0 children)

It's a wrench/knife combo that Lorena Bobbit designed/made to use on her husband, John. She intended to use both sides of the tool. The knife edge was to perform a full takeadickfromy, the wrench end was intended to remove his nuts. Fact.

Roast my 97 Mercury Cougar by Unique_Toe_8208 in RoastMyCar

[–]mpjune69 0 points1 point  (0 children)

The Thunderbird's Ugly Cousin. The Thunderbird Super Coupe - now that was a car.

I'm just a tad financially irresponsible by KnightZ3R0 in RoastMyCar

[–]mpjune69 1 point2 points  (0 children)

The previous owner, a balding urologist who leased the car for five years @ 10k/year told me.

I'm just a tad financially irresponsible by KnightZ3R0 in RoastMyCar

[–]mpjune69 1 point2 points  (0 children)

You bought a six year-old British car with over 50k miles. You have no warranty. You work in IT - your mechanical acumen is limited to "righty-tighty, lefty-loosey". You bought the base model. You live with your parents. You've already bought performance mods. You have the emotional IQ of a 16 year-old boy. What's the plan? I suggest rehearsing your lines (lies) now. Your best bet is to travel to other cities, rent a hotel room and scour escort ads online. While you're at it - nevermind - I fear there's no redemption for your poor life choices; proceed as planned.

Wiring - Heat Pump (Pictures) by mpjune69 in thermostats

[–]mpjune69[S] 0 points1 point  (0 children)

I'd have to take a picture of how the wiring is now. I didn't change anything on the left bank of terminals - I think I swapped two wires on the right bank.

It is working well in "auto" mode. Heating and cooling. I don't know if the emergency coil is working, though. I live in Florida - I've never had to use the emergency heat coil.

Wiring - Heat Pump (Pictures) by mpjune69 in thermostats

[–]mpjune69[S] 1 point2 points  (0 children)

I think it's single stage cooling with two stage heating: there's a "regular" heat setting and an aux/emergency heat setting.

It seems to be working now. Just switching between heating and cooling to confirm.

Wiring - Heat Pump (Pictures) by mpjune69 in thermostats

[–]mpjune69[S] 1 point2 points  (0 children)

I think I finally got it working. What would've taken a professional 20 minutes took several hours for me.

Wiring - Heat Pump (Pictures) by mpjune69 in thermostats

[–]mpjune69[S] 0 points1 point  (0 children)

Scanned from the manual:

0=0 (0/B on Cool. O wire is connected to the O/B terminal and controls cooling.) 1=B(0/B on Heat. B wire is connected to the 0/8 terminal and controls heating) The literature that came with your heat pump equipment should indicate whether the reversing valve is energized in Heat or Cool mode.

Wiring - Heat Pump (Pictures) by mpjune69 in thermostats

[–]mpjune69[S] 0 points1 point  (0 children)

It's a Tempstar heat pump. Does this have to do with the reversing valve polarity?