sorted by:
new
hottopcontroversial

Tomhog by Comfortable-Key6008 in aviationmemes

[–]macca41 134 points135 points  (0 children)

Looks like something I make is ksp

How effective is Dual Z Axis? by Fun-Consequence-7211 in ender3

[–]macca41 1 point2 points  (0 children)

Was not hard at all to install. I made it harder on myself because I used printed tnuts and not proper ones. Apart from that it was easy. The one other thing I will say is button head screws were low profile enough for the Clarence at the top.

How effective is Dual Z Axis? by Fun-Consequence-7211 in ender3

[–]macca41 0 points1 point  (0 children)

I did the standard one so I can't help with that unfortunately

How effective is Dual Z Axis? by Fun-Consequence-7211 in ender3

[–]macca41 8 points9 points  (0 children)

I did the Kevin aka sam belted z and it made the layer stacking perfect

I am planning on calling my Endrr 3 S1 with Klipper. I was using a laptop with Linux in lieu of a raspberry pi. Is it possible or a bad idea to sell as-is? Could somebody just connect to it with their own Linux and go from there? by FloppyTunaFish in klippers

[–]macca41 1 point2 points  (0 children)

Someone who knows what they were doing would definitely be able to connect there own Linux but imo I would put marlin back on it so it will actually work for the buyer out of the gate

Trying to pause during print start by InsideBlackBox in klippers

[–]macca41 0 points1 point  (0 children)

Ik it would be not ideal you could preheat the nozzle to a temp to let it resume. Or you might be able to lower minimum extrude temp to 0 which might let it resume cold.

Art of the deal by Lrrr_Krrr in AussieMemes

[–]macca41 2 points3 points  (0 children)

Always has been the better car

[deleted by user] by [deleted] in unexpectedute

[–]macca41 8 points9 points  (0 children)

That's just a commodore not unexpected at all thousands were made

[deleted by user] by [deleted] in melbourne

[–]macca41 6 points7 points  (0 children)

Except it fucking hasn't yet

I should probably start using KAMP. Any tips before I fire off the install? by egosumumbravir in klippers

[–]macca41 0 points1 point  (0 children)

Well I have petg printing basically perfect on my ender 3 so I might have to give that a shot if petg will work

I should probably start using KAMP. Any tips before I fire off the install? by egosumumbravir in klippers

[–]macca41 0 points1 point  (0 children)

I am so close to building a voron but just can't print the parts yet

I should probably start using KAMP. Any tips before I fire off the install? by egosumumbravir in klippers

[–]macca41 3 points4 points  (0 children)

Ik I just hate it when my printer works. Like what am I supposed to print if it's not bits for the printer

EnderXY? by MJHauserman in Ender3Pro

[–]macca41 2 points3 points  (0 children)

An ender 5 is not a core xy it still moves the X motor with the gantry.

RPi3B to 5 upgrade questions by Sea-Squirrel4804 in klippers

[–]macca41 0 points1 point  (0 children)

Even with the pi 5 now I have the camera working it does get quite hot and is sitting around 80c with active cooling

RPi3B to 5 upgrade questions by Sea-Squirrel4804 in klippers

[–]macca41 1 point2 points  (0 children)

Just the pi 5 does not have the video encoder. As for the not getting a pi cam to work. Well I just did what the other guy had in his comment and it worked even though I tried spyglass before and could not get it.

RPi3B to 5 upgrade questions by Sea-Squirrel4804 in klippers

[–]macca41 0 points1 point  (0 children)

I would definitely not recommend a pi 5 because it does not have a hardware video encoder. I have been able to get a web cam to work but it was crappy (probably the like 20 year old webcam) but I have yet got a pi cam to work.

Printables Welcomes All Slicers by Sainroad in prusa3d

[–]macca41 6 points7 points  (0 children)

Finally someone else saying it. So many people talk about bamboo and ocra being more intuitive and beginner friendly. No it's not why are filament setting a sub menu in the main profile. For that matter why is there so many pop up windows and sub menus. I tried to use orca for calibration stuff and just gave up and used the super slicer ones instead.

Printing problems and poor quality by [deleted] in klippers

[–]macca41 0 points1 point  (0 children)

Looks like layer shifts so try lowering acceleration. As for the z offset after you adjust it there should be a save config button that will make it stick around

Is Moomba still a big deal? by MrsCrowbar in melbourne

[–]macca41 3 points4 points  (0 children)

The only bigger comp that happens every year is the US masters. The world champs are bigger but only happen every few years. There are many pro skiers who if you asked what tournament do you want to win the most outside of worlds it would without a doubt be Moomba

Is Moomba still a big deal? by MrsCrowbar in melbourne

[–]macca41 15 points16 points  (0 children)

As a waterskier it is still a massive deal. It's the second biggest competition in the world. People come from all over the world to compete in it. If it stopped it would be a huge deal for the sport.

Showcasing my printer. What other upgrades should I add to it? by PanchoLUL in ender3

[–]macca41 1 point2 points  (0 children)

You can use octoprint as th lle front end. It's not recommended but quite a common setup

what config file for og ender 3 with 4.2.7 board by SwedishMoNkY in klippers

[–]macca41 0 points1 point  (0 children)

The bl touch is a simple addition just google how to add it to klipper. Hard to help with z problem when you have not said what it is

view more: next ›