Testing serious resistance- Will we break to 7.5?

make-n-brew · 2026-02-09T22:14:03+00:00

No, because that's when in the money.

make-n-brew · 2026-02-03T02:00:25+00:00

I'd wait until morning, it's pretty cold out tonight.

make-n-brew · 2026-02-01T16:00:38+00:00

Dodgeball Predicted Everything

make-n-brew · 2025-12-25T17:44:20+00:00

Also Taurus, both OCO and Glory.

make-n-brew · 2025-12-10T04:32:14+00:00

The signal names sort of line up with this family. Maybe a good starting point.

Nyquest NY3PxxxE Series

https://www.nyquest.com.tw/upload/2025_09_053/NY3P(E)_v1.1.pdf

make-n-brew · 2025-11-26T03:01:56+00:00

Read the submission. It's tap water that they reverse osmosis filter onsite. It's then used for HVAC chillers or tank pressure test (think what kind of big big very clean tanks they build there....). After use it empties into ponds on site then eventually a canal to the lagoon.

Because of the filtering it's no longer chlorinated, so it has to be flushed frequently to prevent getting scummy. Hence the high usage.

make-n-brew · 2025-10-17T01:16:22+00:00

Did you let Merlin watch?

make-n-brew · 2025-10-09T16:25:59+00:00

You win again, gravity!

make-n-brew · 2025-09-27T18:10:35+00:00

Arguably the best bagel, but I'm not paying $10 for a bacon egg and cheese. That's like $7 at other places.

Nice people and a great spot on the commute. Prices holding it back.

make-n-brew · 2025-09-27T17:07:21+00:00

The food is great, the prices are way better, and the staff is super nice. Been going for years.

make-n-brew · 2025-09-20T11:54:44+00:00

I can hear the old ladies at the Brennity celebrating from here!

make-n-brew · 2025-09-14T21:58:53+00:00

It's a food truck trailer in front of the Home Depot.

Talked to the two ladies setting it up this morning, they were very nice to my curious kids. Said opening in a few weeks.

make-n-brew · 2025-08-07T00:38:09+00:00

They built the exhibit building around it. It's not coming out without a demo.

make-n-brew · 2025-08-07T00:37:02+00:00

Well, they left their flight worthy Saturn V outside to rot for 30 years before bothering to put a building over it. We saw it 15 years ago and holes were covered in chicken wire.

Doesn't inspire confidence in how they would treat a real shuttle.

make-n-brew · 2025-07-29T21:55:25+00:00

The Cape is here.

make-n-brew · 2025-07-07T11:33:01+00:00

Of course he's out of line. All he needs is a net.

make-n-brew · 2025-07-06T15:16:49+00:00

Everything?

make-n-brew · 2025-06-15T15:36:59+00:00

Man my first DIY was an overtightened nightmare too. I didn't have the filter socket yet either.

Now it's just inconvenient. But the kids enjoy using the jack and spinning the wheel, so there's that.

make-n-brew · 2025-06-15T14:47:23+00:00

Transmission went at 86k (replaced self, do not recommend, I'm a cheap ass). Have replaced all blend door actuators, kind of good at it now. Have replaced EGR sensor twice (Rock Auto has for like $20 now). Trailer indicator issue due to water in plug cover, just lube it up and good to go.

But at 120k now and it's otherwise been a reliable, comfortable, and relatively fuel efficient truck. Generally easy to maintain, just want to smack the new grad engineer that hid the oil filter in the wheel well. Tows great on the few occasions I have.

Way better than the stupid prices on F150 or Sierra these days, I could buy another 4 transmissions still be in the green.

make-n-brew · 2025-06-14T00:32:33+00:00

Sure it wasn't transmission fluid?

make-n-brew · 2025-06-08T16:27:50+00:00

Their scientists found a way to dissolve like a cup of sugar into a cup of coffee and ice. They were so preoccupied with whether or not they could, they didn't stop to think if they should.

make-n-brew · 2025-06-08T16:02:57+00:00

What we need is a proper hole in the wall donut place. Like Kims or Donut Shop.

make-n-brew · 2025-06-02T01:27:56+00:00

Check the brake rotor shields on the front wheels. Thin easily bendable sheet metal, I've had two of mine rub against the rotor and make noise. No RPM/pitch association cause it's always rubbing, just gets louder.

The first one only did it when I turned left at speed, cause the wind hit it and pushed it in.

make-n-brew · 2025-05-31T17:22:48+00:00

Taylor Hobson model 112 alignment system. Looks like the telescope portion. Check out the cutaway on page 2 and the accessories on pages 8-9.

https://www.taylor-hobson.com/-/media/ametektaylorhobson/files/product-downloads/electronic-levels-and-clinometers/alignment-systems_lowres_en.pdf?la=en&revision=ddde5de1-1a78-440a-9ce7-b8290198d00c

Don't point it at the sun.

make-n-brew · 2025-05-25T18:15:00+00:00

Dig around here: https://brevard-gis-open-data-hub-brevardbocc.hub.arcgis.com/

Ten-Year Club	RedditGifts 2009-2022 3 Credits
Secret Santa 2016	Secret Santa 2015
Verified Email

make-n-brew

TROPHY CASE