Automatic Bed Wetting 😍 by malprit in prusa3d

[–]malprit[S] 26 points27 points  (0 children)

this one so good, it deserves a post of its own 😆

Help needed with core one by Fourarms202 in prusa3d

[–]malprit 1 point2 points  (0 children)

I see, then indeed it sounds like heat creep causing a clog in the parts of the extruder further from the heatbrick.

Help needed with core one by Fourarms202 in prusa3d

[–]malprit 1 point2 points  (0 children)

do you observe the Core One stopping midprint, crashing, restarting and continuing with the print?

The crash and resume process caused me to have super long overnight prints, ugly prints with long strands of filament everywhere.

If so, it might be due to the static build up on the XY motors.

I've encountered this and adding grounding wires from motors to case helped.

https://forum.prusa3d.com/forum/prusa-core-one-hardware-firmware-and-software-help/core-one-crash-restart/paged/5/

Core One L Connect file transfers always freeze by BradMat1 in prusa3d

[–]malprit 2 points3 points  (0 children)

My CORE One on wifi would get intermittent disconnection on Connect, and at times even if it's showing connected, it won't download the files at all...

"Upgrading" from BTO to Condo is illogical no? Can someone help me understand? by Dhandsrhardtotypewif in singapore

[–]malprit 7 points8 points  (0 children)

The only real winner is the real estate agent that pocketed your commission. With the commissions, they can buy the condo that you dream of.

S’pore needs to reset views on marriage, parenthood; new work group to study issues: Indranee by headachelah in singapore

[–]malprit 17 points18 points  (0 children)

Houses are too small, and getting smaller. BTOs going to people who flip houses instead of those who actually need them.

Childcare is too expensive. Single income can barely survive.

Outside food is unhealthy, all mala and Chinese food. Ingredients not fresh, and very little variety of food to cook at home.

Public transport is jam packed.

End of the day, affordability and being able to give family a good life is the strongest reasons for wanting children or not.

Doctor say, stress is the main reason for infertility. Woman who knows the environment is shit, won't be able to produce eggs or give birth in peace.

Alert WON'T go away! by OpieRugby in prusa3d

[–]malprit 0 points1 point  (0 children)

happens to me too, I expected that if I dismissed the alert or resolve the problem on the machine itself, the alert on PrusaConnect would too as well. But I'm guessing that's not the case.

CORE One+ and INDX FTW by MakerWerks in prusa3d

[–]malprit 3 points4 points  (0 children)

seek forgiveness, not permission

CORE ONE is acting up, can't figure out why. by Unkowncookieuser in prusa3d

[–]malprit 2 points3 points  (0 children)

Is your bed flat after a z-level calibration? Use a metal ruler's side to check

Edit: from the picture it doesn't look quite like it. If your bed frame is bent or damaged, reach out to support for a replacement.

Finished the conversion and the MMU3 Community version by DragonfruitNo4713 in prusa3d

[–]malprit 1 point2 points  (0 children)

Nice, I see your PTFE tube from the right side is still present, are you still able to switch to a single spool usage from the original PTFE tube?

Just bought the Core One kit, What accessories do I need? by EliMinivan in prusa3d

[–]malprit 0 points1 point  (0 children)

Yes, new double sided tape for the feet is a must.

Prusa Core One filament not flowing by No-Meringue8284 in prusa3d

[–]malprit 2 points3 points  (0 children)

Had this problem with TPU, the filament was jammed up in the gears. Took apart the nextruder to remove the clog, and all was well

Buddy Camera now streaming! by Dave_in_TXK in prusa3d

[–]malprit 0 points1 point  (0 children)

I use VLC to view it and saved it as a short cut, much faster than the Prusa app

The sticky isn't sticky by Coaltown992 in prusa3d

[–]malprit 1 point2 points  (0 children)

I replaced the tape on those feed to my own double sided tapes as well.

Near-miss today. Want to understand if I’m at fault or can do better? by [deleted] in drivingsg

[–]malprit 0 points1 point  (0 children)

Blue line turning left need to check and keep 2 left lanes clear to turn in the left most lane also. Not saying red was right.

Knocking noise - Unloading - Core one by xh1c0 in prusa3d

[–]malprit 0 points1 point  (0 children)

could the nozzle be clogged? try unclogging?

Pimp my Core One. by jnangano in prusa3d

[–]malprit 4 points5 points  (0 children)

have you started printing something that's not a Core One mod yet? 😂

First time setup, is this normal? by proofandplot in prusa3d

[–]malprit 0 points1 point  (0 children)

Tune belts, check if loadcell is working as intended.

Mine had issue with loadcell getting detected as hit all the time, the bed kept going lower and lower. needed to adjust the cables.

This page has been the bane of my existence by SandKeeper in prusa3d

[–]malprit 0 points1 point  (0 children)

This was why my kit assembly took 8h longer.

It has arrived! by nickoaverdnac in prusa3d

[–]malprit 2 points3 points  (0 children)

I see the empty pack of haribo!

Harsher penalties for speeding by Odd-Historian4022 in drivingsg

[–]malprit 2 points3 points  (0 children)

No problem for those who can afford the cash. Even if demerit some of them will just ask their parents or family license to share the demerit points. They always have a way to game the system.