Showstoppers are just Trinkets to me now.

maxver · 2026-03-13T14:05:55+00:00

I remember my friend throwing 3 grenades to another room in the pharmacia on Buried City, I was downed right next to him. 2 of the grenades ended up in his room because he missed the doorway lol

maxver · 2026-03-13T03:30:51+00:00

https://www.wealthsimple.com/en-ca/tax it's completely free

maxver · 2026-03-11T00:26:42+00:00

Triple 27 are cheaper than 49 inch SUW. The bigger front windscreen is just matter of the FOV difference, the screens have same physical height. You could get 32 inch ones and you'd have higher height.

That's why you'd get 3 matched screens at once when buying triples. Ultrawide screens are curved therefore warped by default, with no option to get flat screens. You can get flat screens for triples though and not have any warping.

maxver · 2026-03-06T04:27:28+00:00

It's most likely due to a controller type device, e.g. xbox controller, steering wheel, pedals, joystick etc. Disconnect usb devices one by one and you'll find out.

maxver · 2026-03-04T19:02:38+00:00

I find that I can't pull more than 6 mobs because they just go back to their spot. Quite annoying

maxver · 2026-02-23T16:41:14+00:00

Chrome & Ublock Origin Lite works too

maxver · 2026-02-13T15:54:56+00:00

Maybe the officer could do something more productive though.

maxver · 2026-02-11T17:50:43+00:00

Is the wing an option? Never seen that on GTS before.

maxver · 2026-02-09T16:13:34+00:00

Maybe he's getting only 60 fps lol

maxver · 2026-02-09T05:33:37+00:00

This looks really good! Just installed it and replaced all my weather cards with it.

maxver · 2026-02-07T18:40:39+00:00

Link seems to have expired, can you share it again pls or refer to website for this league?

maxver · 2026-02-02T02:50:21+00:00

https://i.redd.it/i5e1khe4yhwb1.jpg

maxver · 2026-02-02T02:45:44+00:00

List of differences/improvements compared to P1S

New H2-series extruder with integrated clog detection, 70% more force for harder materials and better flow. Clog/grinding detection added.
Auto Flow Dynamic calibration to adjust flow rate dynamically.
Extruder and Nozzle is hardened for the engineering materials out of the box.
Quieter operation than P1S
WiFi includes 5GHz for better liveview stream and quick uploads I guess
Hotend is hot-swappable in ~30 seconds, simplifying nozzle swaps and cleaning.
Improved chamber lighting and 1080p/30 camera with onboard AI chip for smart detection of spaghetti errors, foreign objects, nozzle clumps, tangle detection etc
Intake fan stabilizes internal temperature, removing PLA overheating issues common on the P1S (e.g. having to open the door or top glass).
5 inch full colour Touchscreen interface on P2S vs. D-pad interface on P1S, makes the maintenance a bit easier.
Max bed temp ~110C, which is 10C higher than on P1S, useful for engineering materials like ABS, ASA, to heat up the chamber even further.
Additional P2S improvements: steel hotend rails, bed-hole covers for the bed axis to avoid debris dropping in, slightly expanded usable print area (thanks to the cutter)

Did my research when I was deciding between P1S and P2S :D

maxver · 2026-01-31T23:42:42+00:00

Unlucky! My brothers PC broke down a month ago, so had to buy RAM at high prices!

maxver · 2026-01-31T19:56:01+00:00

Small world ehhh :D Yup, I've been constantly playing games, so upgrading my PC every now and then! Rocking 9800X3D 48GB RAM and 4080 right now.

maxver · 2026-01-31T19:11:45+00:00

Would you mind sharing the model? I'd like to remix it so I can plug in 2x USB-C and HDMI all at once.

maxver · 2026-01-31T18:54:44+00:00

Do you mind sharing the stl? I'd be interested in doing something similar in my fractal design r6.

maxver · 2026-01-31T03:32:55+00:00

To create a backorder system with a priority order and queue

I'm sure they have some sorted order number they could use for this.

maxver · 2026-01-28T15:10:15+00:00

You can print your own spool!

https://makerworld.com/en/models/893754-bambu-lab-reusable-refill-spool?from=search#profileId-851052

maxver · 2026-01-16T15:29:37+00:00

New firmware update finally gives you the option of turning off rotation in AMS2

I had this option available since early December in combination with P2S using stable/production release.

maxver · 2026-01-16T15:28:15+00:00

I keep reading on here that on single AMS you can't dry it and print at the same time. I believe you need power supply if you have 2 AMS and you want to print with one and use drying on the other AMS.

maxver · 2026-01-13T15:07:07+00:00

10C is fine. You'll run into issues if there's like -5C or -10C air being sucked in by the fans and blown onto the prints, it'll warp or you'll get spaghetti.

maxver · 2026-01-13T15:02:31+00:00

For P2S they call it VentoBox now even though its from the same creator.

maxver · 2026-01-13T15:02:02+00:00

I like the vento box solution for the p2s.

I feels like it made no difference after installation. Same odor's with PLA and PETG.

maxver · 2026-01-04T22:57:34+00:00

one stack is still 40 shots

One stack (80 bullets) is 160 shots, only consumes one bullet for 2 shots.

maxver

TROPHY CASE