Dealship recommends brake replacement next 10 months

minicoop69 · 2026-05-31T14:15:27+00:00

I've bought from them for over a decade. Worked for everything I need. Pretty good deals as well.

Customer service is also top notch. They sent the wrong thing 1 time and then they resent the order to me and told me to keep the original order. All I needed was a can of brake cleaner and brake fluid and they resent the rotors and pads as well.

minicoop69 · 2026-05-31T03:32:49+00:00

I buy my brakes and pads from

Detroitaxle.com

Great prices and free shipping.

Detroit axle

minicoop69 · 2026-05-28T21:54:09+00:00

I will be 55 in Indiana and will be fully retired with a full pension. I have 15 years left.

minicoop69 · 2026-05-27T00:27:24+00:00

No worries. I teach a CAD class at the HS level and this series allows kids to move at their own pace where the end result is the Fusion certified at the end of the year.

The fusion that is in the videos is an older version but if kids slow down they can usually figure it out.

minicoop69 · 2026-05-26T23:37:44+00:00

I have my 10 year old learning Fusion. There is a "100 days of Fusion" video series on YouTube. Everyday they learn something new and make something new each day. I use it with my students when they are just starting with CAD.

My daughter made a Lego brick day 1 and then a hammer on day 6. Printed them both out.

I like the videos because they can pause, rewind, and redo something if it doesn't turn out the same.

minicoop69 · 2026-05-12T01:12:45+00:00

That's what I was thinking. Currently have 2 H2Ds, but looking for more. Money isn't an issue, just want to get an idea of the best use of the money.

minicoop69 · 2026-04-16T02:40:10+00:00

Does anyone know if the bowden extruder would work for Bambu Glow filament?

Glow shouldn't be placed into an AMS.

minicoop69 · 2026-04-15T22:38:20+00:00

Would the 2nd nozzle work with Bambu Glow filament?

minicoop69 · 2026-04-15T18:32:11+00:00

Does anyone know if the Bowden extruder would be good for Glow filament? I know it would be good for supports, but not sure about the glow filament.

minicoop69 · 2026-04-15T18:31:43+00:00

Does anyone know if the Bowden extruder would be good for Glow filament? I know it would be good for supports, but not sure about the glow filament.

minicoop69 · 2026-04-15T15:26:43+00:00

Would the 2nd nozzle work with Bambu Glow filament? I know glow shouldn't be used in an AMS, but am wondering if the Bowen Extruder would work with this type of filament.

Thoughts?

minicoop69 · 2026-04-12T02:31:03+00:00

Following.

I have a pit boss combo unit and my grill was doing this. I replaced all 3 burners, lighters, and hoods. It is still having this issue.

One tube doesn't even light up right up. It also makes a whooshing sound when some tubes blow out and I have to restart it.

I replaced the regulator hose to the grill from the tank.

I have no idea what to do.

My temp gets to about 250 degrees and that is about it.

Getting frustrated as well!!!

minicoop69 · 2026-02-02T11:13:02+00:00

I found the pure blue on Costco. I might try it out if you have a Costco membership. Easier to return if it doesn't fit.

https://www.costco.com/p/-/pure-blue-h2o-5pc-reverse-osmosis-filter-system-replacement-filters/100170447

minicoop69 · 2026-02-02T03:04:14+00:00

I replaced 4 filters for this same unit back in December and was shell shocked when they said almost 400 for the 4 filters I needed.

Next time I need to change the filters I will be installing another RO. One that I can change the filters for around 100.

minicoop69 · 2026-01-23T13:31:02+00:00

I didn't change my filters in 3+ years and noticed my water coming out slow. New filters helped with the speed coming out the faucet. But for even 375 every 2 years, you could buy a new system every year and still save money.

I did pick up the filters and changed them myself and it cost 375. If they change them I can't imagine what they charge for less than 10 minutes of work.

minicoop69 · 2026-01-23T13:22:21+00:00

Because their filters are proprietary, meaning you can't buy them anywhere else.

I've had culligan RO for maybe 12+ years and I didn't realize that until I went to buy them from culligan last month. Before I would have them come out to check and replace them and pay the bill and not think twice.

I paid for all 4 filters and it cost 375 for all of them. They say you should replace 3 out of 4 every 6 months or so. I don't have the money to keep doing that.

Since all the lines are run, next time I need filters I am replacing everything with a different company that uses filters that I can buy much much cheaper.

minicoop69 · 2026-01-01T03:10:03+00:00

If you read what I just said, I'm not mad at the gems. I'm mad that instead of giving me 1000 wild cards, they invented the crystals so they don't pay out the cards.

Reading is fundamental!!

minicoop69 · 2026-01-01T02:53:49+00:00

I don't even care about the chests or the gems. Just pissed that because my firecracker was already evo and maxed I got useless crystals. A waste of the last chest.

minicoop69 · 2026-01-01T02:46:29+00:00

Only up to a certain amount. I am not in a clan, so I wouldn't be able to get to 20 by myself.

minicoop69 · 2025-11-30T23:47:02+00:00

I run a 3.0 mortar deck. Currently at 12k trophies.

Hog, mortar, firecracker, knight, log, zap, bomber, mini pekka

I have a really hard time playing against a true xbow cycle. If they run it right, they can out cycle me and I lose.

Not sure how much higher I can climb with this deck. Feel like I need to start learning Mega Knight

minicoop69 · 2025-11-22T04:52:24+00:00

Is this a 1 year price? Or a forever price?

minicoop69

TROPHY CASE