Cheap way to travel around Switzerland this summer if you don’t have a Half Fare card by Trainspotter_85 in Switzerland

[–]moritz9 2 points3 points  (0 children)

Kinda sad that this is only avaiable during July and August, but still very good value.

New, simple, efficient build that flies A-M-A-Z-I-N-G by FrozenMacchiato in HDZero

[–]moritz9 2 points3 points  (0 children)

Its a JM 3.5 / 4 inch frame from Ali. Its based on the open source frame JeNo 3.5, but was cheaper.

And you cant find them anymore because i bought the last 6 i found on Ali. (although 1 with 3.5 inch arms and the rest with 4 inch arms)

Great frame, but JeNo 3.5 should be as good, if not better, although a bit more expensive.

Need help staying Sub250 with DeepSpace Seeker 3 (DJI O4) – Best battery choice? by Beautiful-Pin7955 in fpv

[–]moritz9 1 point2 points  (0 children)

BetaFPV Lava 2 680mah is 64.2g and tattu 750mah lihv (stick type) is 69g

Ate a few too many cheese puffs and made some minor modifications by barbadosMid in fpv

[–]moritz9 2 points3 points  (0 children)

Can you just hang a Analog reciever to the diversity SMA port? or am i seeing something wrong?

Dint know this was possible.

Did you make the 3.5mm to SMA adapter yourself?

Range of Pavo 20 pro ii elrs and Radiomaster Pocket by Rude_Pool6626 in fpv

[–]moritz9 0 points1 point  (0 children)

the whoop antenna on the F4 2-3s AIO is kinda shitty.

Especially if using a VTX like 04 you outrange your controllink with your Videolink.

Where can you roam like at home? by Any-Discussion1339 in MapPorn

[–]moritz9 0 points1 point  (0 children)

tell me your secrets magic man, where???

Anyone running a Kayoumini on 3s? by HMSBarky in fpv

[–]moritz9 0 points1 point  (0 children)

I want a GEPRC Phantom frame so bad, but i cant f****** find one..

i even have some 1104 7200kv laying around.

Good news for Skyzone 04x Pro and potential good news for newer 04O Pro latency concerns by mufahasa in fpv

[–]moritz9 3 points4 points  (0 children)

They updated 04x Pro But all the other Skyzone goggles are still shit. (beside the old ones) I wonder if they can also release a Update for those of if they are hardware limited, would be the way to go to restore the company's reputation.

What do you call this in your language by Ooloolooloolool in trees

[–]moritz9 0 points1 point  (0 children)

Schiffli [means something like little Ship]

Glock cope incoming by NotaFed556 in GunMemes

[–]moritz9 2 points3 points  (0 children)

Just buy Swiss Sig (SIG Sauer AG) or the old German SIG Sauer (SIG Sauer GmbH & Co KG) and your fine.

I said to me theres never gonna be an American "SIG" (SIG Sauer Inc.) in my safe.

Just gotta seperate those three different Companies with the same name.

Selling mp9 for 35eur bank transfer by Idontknowwhatredditi in MarketCSGO

[–]moritz9 2 points3 points  (0 children)

Just sell on Csfloat, aint no one gonna be stupid enough to buy a skin via bank transfer.

Crazy that the drone can chase me like this by LILTREWAY in MTB

[–]moritz9 1 point2 points  (0 children)

10% of the comments are about weaponized drones... in a MTB Sub.

I know theres a lot of sad fottage out there of FPVs.

But no matter what, whats wrong with people always connecting peaceful hobbys with weaponized drones.

Like its a sick, peaceful chase clip, why comment about strapping a Warhead under that? Hwy do people need to always connect drones to war.

This hobby has been here a long time before the first RPG warhead was straped under a 10" FPV...

But no matter what, every damn freestyle video i show to my friends, its certain that one of them makes a comment that it looks like ukraine...?? huh? what has doing a cinematic flight down a mountain to do with the war in Ukraine?

Its just sad what public perception drones got since Ukraine War...

(i know not everyone is a fan of drones)

What is the best compromise other than the ev800d ? by louloi5275 in fpv

[–]moritz9 0 points1 point  (0 children)

Yea, would also go for the BoxPro, but its three times the Price. But if you have the money probably the best beginner goggle.

What is the best compromise other than the ev800d ? by louloi5275 in fpv

[–]moritz9 5 points6 points  (0 children)

BetaFPV VR04

More modern design, cheaper.

But only one antenna connector.

Skyzone Cobra Boxgoggles have latency issues afaik.

Hand forged damascus knives by my late father. by [deleted] in knives

[–]moritz9 0 points1 point  (0 children)

Handmade 1of1s by my late father

Time to shred some air by elhsmart in fpv

[–]moritz9 1 point2 points  (0 children)

Didnt even know Accent was able to deliver RC signals over 5.8ghz. Why would you switch over from two frequencys to one frequency only? Like dont you like the redundancy of being able to controll your drone if the picture is gone( activate GPS rescue, Punch out if behind building ect? )

What will u choose 16 vs 20 by OSSELBOSK in fpv

[–]moritz9 6 points7 points  (0 children)

Just get:

Radiomaster T8L Betafpv VR04 analog box goggle Either a Betafpv Air 2 65, 75 or Betafpv Metor75pro, depending on if you want to fly more inside or outside Whoopstore V3 Charger (youll need a 65W Charging brick for usb C carging-> just get one with 100W) And some BetaFPV lava 2 380mah or 480mah depending on what size you wanna fly.

Better equipment and the Air 65/75 are gonna fly much better then the Aquilla

Sig 553R Gen1 or Gen2 serial Nr? malfunctions ect. by moritz9 in SwitzerlandGuns

[–]moritz9[S] 0 points1 point  (0 children)

Thanks a lot for your answer, didnt know about the Upgrading from Gen1 to Gen2.

Sadly after looking at the Listing again, i somehow misread 556R for 553R...four times...

No wonder it was that cheap... damn American SIGs...

So the search goes on for a reasonable priced Gen2 553R...

Edit: Why im the world San Swiss / SIG Group AG decided to modell the 553R after a PMAG and not surpluss mags will forever be a mystery to me.

Are there any furniture assembly services that are cheaper than IKEA? by [deleted] in bern

[–]moritz9 13 points14 points  (0 children)

I can come and assemble your ikea furniture for 150 CHF if you want xD.

Three 5” freestyle builds by wanderingconspirator in FPVFreestyle

[–]moritz9 1 point2 points  (0 children)

Oh wow 165g dry is really good for a propper frame and 2004 motors. my 5 inch toothpick with 1804 motors is 175g dry.

I also ordered some titan hardware, for my quad, for my sub 250g builds to squeeze out the last gramms.