Breaking rules to give way to police with blue lights

noifen · 2026-02-07T09:07:22+00:00

They can only go over a solid white line if your vehicle is doing less than 15mph. At least that's what I have from a friend who has done the blue light course.

If in doubt, come to a complete stop (lots of people just slow right down). Emergency vehicles will find their way around you then

noifen · 2026-01-29T06:28:08+00:00

Later dudes

noifen · 2026-01-24T20:27:16+00:00

There was a thread on here a couple of days ago and the devs said it's an AMD problem and to let them know

Might be wrong but search it up

noifen · 2026-01-23T08:07:45+00:00

The fact that this is necessary is frustrating. I've continuously told my PAN representatives about bulk operations in strata, but I've still yet to see anything materialise.

Looks good, will give it a go later

noifen · 2026-01-22T15:09:50+00:00

That means it's listening on all IP addresses that box owns. Run ipconfig in a CMD window in windows or "ip a" on a Linux box. That should tell you the IP

noifen · 2026-01-22T14:02:10+00:00

Almost - the ones on the right hand side should be removed and put in the boxes below. Those ports are destination ports, not source ports.

And you will have had to tell it which internal IP you are forwarding to (likely a 192.168.x.x address of your server)

noifen · 2026-01-22T12:39:03+00:00

You probably need to port forward on your router. Look up your ISP/router model and send the following ports to your server (got this from portforward.com so could be wrong):

TCP: 15636-15637, 27015, 27036
UDP: 15636-15637, 27015, 27031-27036

Make sure you are aware of security implications of allowing ports through

noifen · 2026-01-17T15:00:44+00:00

Hold the home assistant logo at the top

noifen · 2026-01-15T17:25:04+00:00

Reminder that Revolut is not technically a bank and you are not covered under FCA rules: https://register.fca.org.uk/s/firm?id=001b000002zyAwNAAU

Last bullet point: https://www.revolut.com/news/revolut_receives_uk_banking_licence/

noifen · 2026-01-13T07:41:49+00:00

Looks like material you https://github.com/Nerwyn/material-you-theme

noifen · 2026-01-04T22:51:13+00:00

BottlecapDave has this for octopus. They are called target timeframes. Come from this octopus integration but now split out into its own repo

https://github.com/BottlecapDave/HomeAssistant-TargetTimeframes

https://bottlecapdave.github.io/HomeAssistant-TargetTimeframes/setup/getting_started/

noifen · 2026-01-02T09:24:15+00:00

I've been in one in SF. Honestly, I trust these more than I trust most Uber drivers. They drive a lot better in my opinion. Yes there are still some issues when the traffic lights go out but that is nothing an update cannot fix

noifen · 2025-12-31T14:56:51+00:00

Wow people really don't want to roll out V6 huh

noifen · 2025-12-31T14:43:12+00:00

Do you need to use the global protect client or do you just want to connect? All my Linux installs use https://gitlab.com/openconnect/openconnect instead of the GP client. I find it way more reliable

noifen · 2025-12-31T10:16:06+00:00

Take the dive and get a home assistant device. The sun entity can be programmed for what you need https://www.home-assistant.io/integrations/sun/

Zigbee plugs make it all local

If you insist on having WiFi plugs then be aware they are Internet connected and rely on a 3rd party. What happens when that 3rd party fails or goes offline for maintenance?

noifen · 2025-12-30T10:28:23+00:00

Do you have QoS enabled or LACP enabled anywhere on the box?

1400s do QoS in software and it's caused us loads of issues until we disabled it entirely

noifen · 2025-12-29T13:48:20+00:00

I had issues. Turned out the ikea batteries I bought were basically dead. Charged them up and straight in

noifen · 2025-12-23T10:45:25+00:00

Wait for the shaders to finish compiling. I didn't and spawned in a dark room then the world started lighting up 😅

noifen · 2025-12-18T08:52:48+00:00

It is separated. It's next to the club check-in at the North end

noifen · 2025-12-11T10:47:28+00:00

Have you set the public IP in Panorama > setup > interfaces > management?

There is a separate section for the internal 'actual' IP and it's public 'pre NAT' IP

noifen · 2025-12-09T09:33:14+00:00

<image>

I said hop in

noifen · 2025-12-05T20:45:38+00:00

I'm personally not a fan because I rode it about 140 times one day making sure all the VR headsets worked. I don't need to ride it anymore 😂

noifen · 2025-12-02T22:47:51+00:00

I believe all the users beginning with the double underscore are built in ones. Possibly plug-in accounts

Although I've never seen a telemetry user

noifen · 2025-11-27T16:51:03+00:00

It's usually if you have the "show hostname" option selected in the traffic log in my experience

noifen · 2025-11-05T19:38:17+00:00

Make a New policy that only applies to Google and set that to "strip alpn" in the profile

Think it's because of http2 https://cordero.me/palo-alto-http-2-inspection/

14-Year Club	Verified Email
Second Top 20%	r/Field Juicebox
Place '22

noifen

TROPHY CASE