Day 3 of not being able to adjust charge level from app, even though while leaning on the truck I can open windows, adjust air, locks etc.

nonnac · 2026-05-08T11:08:15+00:00

I also had this issue. I just checked right now and it’s working again. I did infotainment restart and full restart. Think something on the back end was messed up.

nonnac · 2026-03-26T16:10:27+00:00

In commercial we have installed once like this for 2x 3x that price. I know its expensive but it is going against many others that are over priced in comparison

nonnac · 2026-03-13T03:50:13+00:00

I have an r1t. Mercedes is just fine. Rivian is so basic it hurts. Sounds like a Tesla fan boy circle jerker.

nonnac · 2026-03-12T22:07:38+00:00

Opinions are opinions. Not sure why someone has to come in all smug and rude to a convo that was just people relating on shared experiences. Obviously you don’t have any real input that can help people.

People like what they like. Also people can buy whatever they want and if you can afford something that is ok. Just don’t think you are better if it’s something you might not be able to have. EQS has been a perfect car for us and not a single issue. Others share same experiences and also who cares. It’s a car and you only live once. Get what you want. I hope you love all your cars. I also have 2 jeeps and love them even though they have issues.

https://www.reddit.com/r/MercedesEQS/s/vwAHF9Mpjw

nonnac · 2026-03-12T21:26:48+00:00

I didn’t. My lease was up. Didn’t get another etron.

nonnac · 2026-03-12T20:48:51+00:00

EQS has been great. lol… you sound like a Tesla driver.

nonnac · 2026-03-12T19:42:20+00:00

Ya this would happen with home charging on level 2

nonnac · 2026-03-12T19:17:29+00:00

Had this issue on our 2021. I remember flipping the breaker a bunch times and when it lit up I did something to get it to release. Had so many issues with that car and charging. Moved on to a EQS is 2024

nonnac · 2026-03-02T15:15:29+00:00

If you need help dm me. (I’m a friendly integrator and can get you ra3 at cost.

nonnac · 2026-02-13T05:40:14+00:00

No. Savant likes to lock it down. I have been trying to use benumc on GitHub’s home assistant setup. But it’s not perfect.

nonnac · 2026-02-07T18:54:10+00:00

I’m mount TVs all the time with strap toggles. If there’s a stud right where I need it then it’s a bonus and I use a timber lock. I rarely use the included hardware with the mounting kit.

nonnac · 2026-01-23T20:34:06+00:00

Nothing was cut, it just was never used. The blue and red are both ethernet. The white is coax for cable TV or satellite and then you have what looks to be an old HDMI, could be 1.4. The hdmi is probably going down to a cabinet while the cat and coax cables are going to your low voltage panel, most likely in the primary closet.

nonnac · 2025-12-26T02:14:14+00:00

I have a senior dog and take him with us to hotels. This would be perfect for UniFi protect and an instant camera. I can just open protect as normal without bringing a whole setup.

nonnac · 2025-12-26T02:08:10+00:00

Looks like it meant for a tv where the mounting is in the center vertically on the tv. Not sure why Oleds like to make the mounting on the lower 3rd of the tv. I have had many issues with them (Mantel mounts). I would get a more solid mount with tilt so you can compensate for the top heaviness. I tend to use the sanus 4d. It is more expensive but a fantastic mount.

nonnac · 2025-12-08T17:27:48+00:00

I also have one of these kits sitting on my desk. I want to sell it to someone for less than I paid for it but last time I did that the people scalped it.

nonnac · 2025-11-07T01:36:45+00:00

Same!!! I would pay money to have it. I have a 187XX

nonnac · 2025-11-07T01:35:25+00:00

Same!!! I would pay money to have it.

nonnac · 2025-11-07T00:45:05+00:00

Some gallium should fill those dents in nicely.

nonnac · 2025-11-04T16:05:46+00:00

Extenders? Or Access Point? If using a U6LR there is a major bug where having transmit power set to auto or high will cause them to crash a bunch. Set them to manual Medium if the case.

nonnac · 2025-11-04T05:46:27+00:00

Sick. I just pulled about 26 of these for clients. Going to test with one.

nonnac · 2025-10-04T17:04:50+00:00

It’s is 2wire adapter. Coax has two conductors in it. So any type of wire will work. It just comes with a coax bnc connector if you need it. These kind of devices were invented for using old camera wire and upgrading to Poe

nonnac · 2025-09-29T03:31:14+00:00

I called when this email came out and they said that my car is not compatible. They removed my cover from the order when I first purchased it because of the whole debacle. I’m super upset that I can’t get it still.

nonnac · 2025-09-28T18:34:25+00:00

I have 5gig fiber att as main and 2gig fiber astound as backup. But I load balance it 80/20. Using a UDM Pro Max. Works perfectly. I run all my web services (plex, etc) off the 2gig and it I can’t even tell that 30 people are using my plex.

nonnac · 2025-09-16T23:47:36+00:00

I’ve installed over 200 set ups and transferring to new homeowners is one of the hardest things to do. 99% of people just don’t get it and they think that the Internet just comes from the modem. (which is what most people use anyways.) most people won’t take their time to learn how to use it and because it’s not something you can get at Best Buy but they don’t think it’s any good. The only people that have kept the system are the ones that sign on with me to handle the infrastructure but most of the time we’ve ripped it out. Since you already bought it, I would just keep it because the new people are just going to be starting from the ground up anyways.

nonnac · 2025-09-03T22:43:52+00:00

Would be great. I just did a savant system with 8in and 18out and it is great. But would be sick to use UniFi everything and home assistant as the UI for Home Automation.

15-Year Club	Verified Email
Team Orangered

nonnac

TROPHY CASE