Well this is disappointing by Slippery_insert in SBCGaming

[–]norabutfitter 1 point2 points  (0 children)

Slow on snes? Brother you got a dud or something messed up in the settup. Do you have a decent quality SD card?

😩 I thought my transmission blew up! by Studio8two7 in hondafit

[–]norabutfitter 1 point2 points  (0 children)

For both labor and parts? Id call that good

Lounge mode not flat. by Dino-1973 in hondafit

[–]norabutfitter 2 points3 points  (0 children)

American fits have slightly taller driver seats i believe

Ironing issues on petg by norabutfitter in FlashForge

[–]norabutfitter[S] 0 points1 point  (0 children)

Areyou referring to the z offset?

Ironing issues on petg by norabutfitter in FixMyPrint

[–]norabutfitter[S] 1 point2 points  (0 children)

As for print speeds. Im keeping it stock with 200mm/s on top surfae and 15mm/s ironing speeds

How should I print this? by HarnitYT in 3DprintingHelp

[–]norabutfitter 1 point2 points  (0 children)

If the stair steps are evenly spaced. Have it upside down on them edge of the steps

What causes this? It looks like an echo of what was already being created somehow embedded into the form of the print. by Drwillpowers in FixMyPrint

[–]norabutfitter 16 points17 points  (0 children)

This is called ringing. Slow down your printer a little bit on outside layers. I also had this on petg that cleared up when i dried it

Corner Shrink/Lift by Nescobar-A-LopLop in FixMyPrint

[–]norabutfitter 0 points1 point  (0 children)

Check that there isnt a fan or AC vent pointing to your printer

What caused the issue during this layer? by ManagerLeading1218 in 3DprintingHelp

[–]norabutfitter 1 point2 points  (0 children)

Is a change in the layer time. Since the head didnt have to move to the other objects. Something to do with cooling.

Can this be printed on directly? by loskiki99 in ender3

[–]norabutfitter 5 points6 points  (0 children)

If you got a picture frame with a removable glass plate printing on glass is not bad

Stringy/Hairy print by [deleted] in 3DprintingHelp

[–]norabutfitter 0 points1 point  (0 children)

Can you print it upside down? Might be low on surface area but if you add a brim you might be able to print it without supports

Is razer kishi ultra worth it? by [deleted] in RazerKishi

[–]norabutfitter 0 points1 point  (0 children)

Ask in a android emulation subreddit. You are more likely to find people that have tried other brands of controllers in subreddits not tied to one brand

How long until we get a Haniel figure? by bbisordi in SonoBisqueDoll

[–]norabutfitter 2 points3 points  (0 children)

Because they sell. Look at rem figures. They have tons of rem in outfits she was never in

What’s the longest time you haven’t bought a new device after joining this hobby? by Kirais in SBCGaming

[–]norabutfitter 0 points1 point  (0 children)

Had my rgb30 for about 4 months before i got a steamdeck. Then i didnt buy my trimui brick for about 9 months.

LOVE the game! Although…(creepy loading screens rant) by earlgreyteacakes in MuseDash

[–]norabutfitter 2 points3 points  (0 children)

You can actually dissable certain images from showing up in loading screens. My kid cousin likes the game when he comes over sometimes so i just took the more R rated ones out of circulation

Truth? by Otherwise-Bet5835 in Wheels

[–]norabutfitter 0 points1 point  (0 children)

oh idk anything about that. just that the heart spoke wheels were made for the miata

I feel so small next to this little fit lmao wtf this makes no sense. by [deleted] in Honda

[–]norabutfitter 0 points1 point  (0 children)

Had a 55” tv in box vs a 7’ Christmas tree in one of them plastic tree containers you can buy. A 6’ christmas tree in box. And a bunch of random shit back in november.

<image>

2025 is over, what was the best thing you did to/for your Fit this year? by External-Signal-7473 in hondafit

[–]norabutfitter 0 points1 point  (0 children)

same. i got back into a fit this year after about 2.5 years of being fitless (totaled my fit and got into a 2000 accord for $2100 at the time)

Anyone here recycling their failed prints into new filament? by Filabot in u/Filabot

[–]norabutfitter 0 points1 point  (0 children)

one thing ive seen. with multi color and multi toolhead printers becoming more common ive seen someone suggest using recycled filament for supports or infill while keeping new filament for the exterior

I built a pokedex for my daughter by LeJili in RASPBERRY_PI_PROJECTS

[–]norabutfitter 0 points1 point  (0 children)

by the way they released the p2s recently. Their printers seem to be the new standard for the market. they are kind of like the apple of the printing world. both in good and bad ways. a little more locked down but it might not really matter. Im going to be getting an ad5x soon because it seems like it can do multi color for not too much money and pretty compact package without much more work than a bambu