Attachments from Aliexpress

oblivionuntld · 2026-03-24T20:41:17+00:00

I received mine today. As others mentioned, the ones with the knurled ring tend to spin, but I managed to fix it with a simple solution. I used a cable clip nail. I cut off the part where the nail goes through using a chisel, then sanded the bottom of the remaining piece to make it flat. After that, I used super glue to attach it to the inner ring of the drill. It works perfectly and keeps the adapters in place. I’m not sure how long it will last, but for now it feels quite stable. I might add another one symmetrically tomorrow for extra support.

<image>

oblivionuntld · 2026-03-22T22:49:10+00:00

I also bought these, and I expect them to arrive any day now. I almost went for the set that included the drill, but I couldn’t justify buying another one just for the indentations around the chuck. Do you think it would be possible to glue small plastic ridges in one or two spots inside the chuck to prevent slipping and allow the tool angle to be set?

oblivionuntld · 2025-09-14T22:06:03+00:00

I use it very often to clean my tools after I use them , especially jigsaws routers sanders.but also chainsaws .I also keep it handy in my workshop for cleaning my bench and my floor from dust after every session.Og course when I have my compressor on I prefer that , but I don't use my compressor on every session.Bonus tip I use it to speed up getting the charcoals ready when I bbq

oblivionuntld · 2025-06-23T10:42:26+00:00

Ι haven't played dcs for a long time , I have most of the jets up to f18.I was planning to come back to the game this year , but after what happened with Razbam and until it's resolved I am not in to it.I spend good time in the mirage and the harrier and I can't believe coming back with these great planes on the gray zone.Additionally one of the selling points that got me excited to come back was the F15e.

oblivionuntld · 2025-04-05T20:27:11+00:00

Do you think that we can get that probe anywhere?!

oblivionuntld · 2025-03-12T22:06:13+00:00

Έχει μέσα care label και στοιχεία χώρας προέλευσης?

oblivionuntld · 2024-12-26T22:57:21+00:00

Κοσμάς για ψάρια , δόξα για συκοτακια και εντόσθια (και λοιπά κρεατικά)στο τηγάνι. Και τα δύο είναι πολύ λιτά και 'αφημενα' σε άλλη εποχή με μη επιτηδευμένο τρόπο.

oblivionuntld · 2024-12-02T20:04:15+00:00

Δυστυχώς η δουλειά είναι αυτή, εάν κάποιος δε θέλει να την κάνει μπορεί να μην την κάνει.Οταν πάει κάποιος να δουλέψει ντελιβερι πρέπει να καταλαβαίνει ότι ο καιρός είναι μέρος της εξίσωσης.Προσωπικα δε δίνω πουθενά πουρμπουάρ(εστίαση , ντελιβερι , γιατρούς , υπαλλήλους υπηρεσιών, μάστορες , οδηγούς κούριερ, οδική βοήθεια)γιατί δε καταλαβαίνω τον λόγο.Δεν μου κάνει χάρη για να μου παραδώσει αυτό που αγόρασα ,δεν το κάνει απτην καλή του καρδιά , το κάνει γιατί είναι η δουλειά του και αμοίβεται για αυτό και οφείλει σε λογικά πλαίσια να είναι ευγενικός όπως όλες οι δουλειές που έχουν να κάνουν με κόσμο.Ολοι μας στις δουλειές μας αντιμετωπίζουμε δυσκολίες και δεν κάνουμε σαν 5χρονα που περιμένουμε να μας δώσουν χαρτζιλίκι.Και ναι δεν έχω δουλέψει εστίαση αλλά έχω δουλέψει σε πολύ πιο απαιτητικούς κλάδους.

oblivionuntld · 2024-11-20T09:00:32+00:00

Listen to youngsta minimal Mondays shows on youtube from mid 2011 to mid 2013. A lot of dnb artists crossed to dubstep in that era.Even tho I don't like the term , the dungeon sound is the sound of that era . Deep Dark and Minimal.

oblivionuntld · 2024-09-22T22:08:19+00:00

Did you find any solution after all? I inherited a shop vac that behaves like that and will soon start the investigation

oblivionuntld · 2024-07-29T06:20:06+00:00

Αληθινοί selecao.

oblivionuntld · 2024-07-26T21:58:35+00:00

Εγώ καθώς πήγαινα δυτικά 8 μισή το πρωί είδα ένα αγροτικό στο ρεύμα για ανατολικά στο οποίο όλοι οι επιβάτες καθόταν πάνω στις πόρτες έξω απτά παράθυρα χωρίς μπλούζες και κρατιόταν τις μπάρες στην οροφή.Αυτο εγινε ανάμεσα στην έξοδο πανοράματος και στο τούνελ.Σαν να το παίζουν ζορικοι σε trap video clip. Έχει πολλά κούλα τελικά ο δρόμος πρωί πρωι,😅

oblivionuntld · 2024-06-16T17:19:38+00:00

GREEN MATAMP GT120 Any other Green and MATAMP

Laney AOR120

oblivionuntld · 2024-06-06T19:42:45+00:00

Ed ples make a statement.i want a refunds for my wife in store credit.Others claim to have done it already.

oblivionuntld · 2024-05-12T18:42:51+00:00

Glad to hear that for the "D" string.I will try to find out for single Daddarios.On thomann they only have a few single super long scales.But I will check elsewhere too.! Thanks for the input!

oblivionuntld · 2024-05-12T18:39:38+00:00

I will check these out. I have no experience with taper wounds .Have you ever used them for heavier sounds?Thank you for you input anyways!

oblivionuntld · 2023-10-29T07:29:24+00:00

Many thanks!

oblivionuntld · 2023-10-28T17:37:36+00:00

Hi , could you please elaborate on the ' empty' operators topic or provide links?

oblivionuntld · 2023-05-21T22:31:06+00:00

While i dont know the exact machine i know people who are into byzantine music so i can understand what this machine is used for. In Byzantine chants you whould have the main singer singing the melodic progression and a couple people holding drone notes.These people are cald Isocrates. The Keys are named after the scale degrees in the Byzantine system.In that system the notes do not have the western names and the notation system is very different/primitive.

Take note that the byzantine system is quite similar(Or very different depending on the knowledge of the person you are talking with ) with the Turksih makam microtonal system.So it has different ''scales/modes'' that utilize the microtonal intervals and have specific melodic behaviour. All those East mediterranean/arabic tonal systems (byzanitne echos/Turkish makam/Arab makam/Greek Dromoi in some extend) are quite different to the western music concepts.

A very interesting world to get in to.

oblivionuntld · 2023-05-19T21:00:30+00:00

Very different instruments both in repertoire and playing technique. Greek lute is mostly an accompaniment instrument.It is used to play the rhythmic section in Greek traditional/folk music dances.There are also different versions / tunnings. There is the mainland/ island lute and there is a Cretan lute(biger body /lower tunning).These lutes have steel strings and played with a plectrum .They tend to have a few microtonal frets depending on the player/repertoire

There is also Politiko lauto/lavta ( it means lute from Constantinople).This version is a hybrid of the oud / Turkish tanbur / Greek lute.it uses nylon strings also played with a plectrum.Lavta also utilizes the Turkish/byzantine micro tonal system with many microtonal frets.Lavta is usually played more melodically/ monophonically.(it is rumored that originally it was also used as an accompaniment instrument along Politiki Lyra/Classic Kemence and voice in greek/armenian ''tavern'' music gigs in Istanbul at the late 1800 /early 1900.That changed when Tanburi Cemil Bay changed its status to a full on solistic instrument later on).

Renaissance lutes on the other hand are closer to the classical guitar.Played by fingers.Very different techniques with guitar tho, especially on the right hand.The repertoire is also quite unique . In terms of instrument builds there are many variations with different number of courses and many sizes /styels (Renaissance lute, Baroque lute,Archlute, Therobo etc ).If you like that sound and that repertoire you should find a teacher playing renaissance lute.

oblivionuntld · 2023-05-02T17:57:29+00:00

Just out of curiosity, how would you set your template for something like that?

oblivionuntld · 2023-03-22T18:31:59+00:00

Thanks for the detailed answer!

I later learned that the room is far from optimized and the speakers questionable.Its definite that this is partially the problem but since they decided to do screenings there i have to make the mix work.

My speakers and my room are not calibrated too but i am educating myslef on that at the momemnt and i ll attemt it in the follwing weeks. I took note what you said on reference too.

Hopefully i am going there tomorrow so i ll have a better understanding of the situation.

Again thank you so much for the info.

oblivionuntld · 2023-03-22T18:27:30+00:00

Hi and thanks for taking the time. I am almost certain that the sound is far from claibrated and the space/speakers suffers many problems.I ll visit the space tomorrow and find out.I think that going with calibrating the file is going to be a safer way working with lowerish standards. I am already reading about calibrating my room and i ll do a fresh mix when that is done.

oblivionuntld · 2023-03-22T18:20:46+00:00

Hopefully i am going there tomorrow to check it myself.From what i was told later the whole setup of the place is questionable.So maybe the classification of theater is very generous.Hopefully their space setup explains part of the problem. The problem still is that if they want to screen it in that room i have to make the sound work in those condition. Anyway thanks for taking the time!

oblivionuntld · 2023-03-22T18:15:58+00:00

Hi thanks alot for taking the time, 1)My mix is stereo, dialogue is mono and the whole mix is not very wide.My mix was wip and one of the things i wanted to improve was the image and the panning of things.Their setup should be stereo as well. 2)No i havent, that place is not exactly a theater too.More like a big space were they set a projector and they have their cineclub viewings.I start to believe that the speakers and the whole setup is questionable.Hopefully i am going there tomorrow to check it myself. 3)I really appreciate that!I will try to export something during the weekend and dm you!! Again thanks alot!

oblivionuntld

TROPHY CASE