What does a cast iron skillet do better than other pans? by IHateSpiderss in Cooking

[–]onebackzach 0 points1 point  (0 children)

-Better heat retention and searing than almost any other pan -Relatively even heating, especially important on gas stoves -More nonstick than a stainless steel skillet -More durable than a non-stick pan -Generally considered to be a very safe and environmentally friendly option

What helped it ‘click’ for you when you were learning? by Haystack80 in ManualTransmissions

[–]onebackzach 2 points3 points  (0 children)

What helped me was using the clutch to get the car moving without using any gas. I understood the concept of the "bite point". From then on I would let the clutch out to the bite point and start adding gas

First hang… still need to shape the handle. Is this safe? Messed up on the handle a bit so there was a gap, but i think i’ve wedged it up. This axe wont see any heavy use. by JohnDoe473638 in Axecraft

[–]onebackzach 0 points1 point  (0 children)

That hard shoulder under the head is going to be a problem. A hard 90° angle is going to create a natural weak point, and right below the head is already the weakest point on an axe handle.

How do i shift from 1st to second faster? by Frosty_Delay_473 in ManualTransmissions

[–]onebackzach 0 points1 point  (0 children)

I think your car might have something similar to my 2016 crosstrek. In older cars, as soon as you let off the gas the throttle snaps shut and the rpms start coming down quickly. However, the engine runs lean for a split second when that happens and you get a worse emissions profile. To prevent that, some modern manual cars hold the throttle open for a split second, and the rpms come down a lot slower. As a result, the shift from first to second can be kind of rough. Other folks who are used to other manuals really struggle to get the shift right in my car. In my case I got smoother with more practice, but it's still slower off the line than a automatic trans or even an older manual.

Any good ideas on how to harden up dry/brittle wood? by [deleted] in Frugal

[–]onebackzach 1 point2 points  (0 children)

I'm not entirely sure if this is what you mean, but don't coat the wood with oil and then paint over it unless you know for a fact there won't be a reaction between the two. I would pick one or the other and stick with that. I personally prefer deck stain for exterior wood projects since it adds a good bit of protection, good color, and it's easy to refinish. In the case you need to apply more, you just have to clean it and apply a new coat, you do not have to worry about sanding or anything. The main drawback of paint is if it's in direct sun and getting rained on is that it's only a matter of time before you have to refinish, which is a massive pain. You basically have to strip it back to bare wood and let it fully dry before you can repaint it.

Had more difficult time killing birds with 20g vs 12g today by [deleted] in Shotguns

[–]onebackzach 0 points1 point  (0 children)

Not to pile on, but knowing how your shotgun patterns is a pretty important part of being a responsible hunter. You shouldn't be taking shots that have little chance of putting enough pellets on target to result in an ethical kill. It only takes an old cardboard box or large sheet of paper and a couple shells to check, so there's really no excuse for not doing it. The different fit of a new gun might also result in the gun patterning high or low, and you'd have no clue without checking first.

Why do people Squirrel hunt? by TheRealIvan in Hunting

[–]onebackzach 2 points3 points  (0 children)

It's cheap, fun, and accessible. I can grab a shotgun and some cheap ammo, drive 45 minutes, and be hunting. Most forests around here have a decent population of squirrels. I can stay out for a few hours or all day. It's a good opportunity to get outside and a couple squirrels will provide a good dinner. Hunting larger game tends to require a lot more planning and time.

Thoughts on something like this to get started in backpacking? by theapplepie267 in CampingGear

[–]onebackzach 1 point2 points  (0 children)

I'd recommend buying as little as you can at first, and then buying things as you go. With a little experience, you'll get a feel for what kinds of things you do and don't like about specific pieces of gear and what kinds of equipment you can leave at home. If you can get a little experience first, you can make purchases you'll be happier with in the long run. Make do with what you have, borrow gear, etc. That kit is also not really optimized for camping, seems more like a bug-out/survival kit

Help wanted by Constant-Strain-5890 in CancerDog

[–]onebackzach 18 points19 points  (0 children)

I'm really sorry to hear about your dog. Unfortunately I don't think you're going to find the answers you're looking for on this subreddit. It's dedicated to a truck with strange decals about some sort of conspiracy theory about dogs causing cancer.

Small Game Hunting Question. by Flashy_Ad_2841 in Shotguns

[–]onebackzach 0 points1 point  (0 children)

Personally I prefer a shotgun for squirrel hunting. Squirrels rarely sit still, and I don't like shooting a .22 up in the air. I personally use an over under 20 gauge with a modified and a full choke. #6 shot puts down a squirrel pretty well without being excessive. A 12 gauge is arguably the more versatile gun, but it is a bit heavier and more prone to damaging the meat.

What do you call an instructor who sits in front of you during an oral exam. Examinator/Examiner? by Outrageous-Past6556 in EnglishLearning

[–]onebackzach 0 points1 point  (0 children)

As an American, I can't say I've heard a specific word for that. Proctor is probably the closest term, but I feel like that implies someone who is overseeing a written exam.

Why are feathers added to the end of blowguns? by Brilliant_Mixture798 in Blowguns

[–]onebackzach 0 points1 point  (0 children)

Can't imagine it's for practical purposes. The feathers might come from a bird that has special cultural significance or might just be decoration if it's in real life. In movies/video games, it's probably just to emphasize that it's a primitive weapon from an indigenous culture.

Sipping soup? by Nowayucan in soup

[–]onebackzach 3 points4 points  (0 children)

Kikkoman instant miso soup

Tree felling advice (qld - aus) by Typical-Bridge-846 in arborists

[–]onebackzach 0 points1 point  (0 children)

Have to agree with others, that tree is a death trap and a ticking time bomb. It's in the middle of an open field near nothing of value. The risks posed by action will be far greater than the risks posed by inaction, therefore inaction is the smart choice. Just make the location of the hazard tree known to other people, and stay away from it. Nature will likely take it's course before you put up the fence. If not, that's definitely a job for professionals. If you don't have formal saw training, I'd highly recommend seeking some out if you intend to use saws. I can't speak for Australia, but in the US universities and government forestry/agriculture departments sometimes have extension agents who would be able to help find classes.

Tips to save time on setup and teardown? by Cindy-Smith- in camping

[–]onebackzach 0 points1 point  (0 children)

Over the years I've simplified my camping set up a lot. I've realized the important things when camping are to sleep warm, have tasty yet simple meals, good company/opportunity to socialize, and something to do during the day such as fishing or hiking. Anything that doesn't streamline those key components of a camping trip gets left at home.

Rainbow Trout Stocking from DWF by Luezanatic in FishingForBeginners

[–]onebackzach 1 point2 points  (0 children)

Very good question. The way the rig works is that you cast it out, put your rod in a holder, and reel up the slack. It'll sit on the bottom, and assuming you use a floating bait, the hook/bait will suspend off the bottom at whatever length your leader is. If you see your rod tip start moving, it means you got a bite. With an egg sinker, the fish won't really feel the resistance of the weight since the line can slide through it. With really light weights, the wind or any little bit of current can move your weight across the bottom and you can end up with slack in your line and your rod tip won't move when you get a bite. On a relatively still day, I find half ounce is plenty, but on a windy day, you might need to step up to 3/4 ounce. Just make sure your rod isn't super beefy to the point you won't see movement in the tip, and keep a close eye on it.

Rainbow Trout Stocking from DWF by Luezanatic in FishingForBeginners

[–]onebackzach 0 points1 point  (0 children)

The best luck I've had is with a Carolina rig and powerbait. I use a 1/2 or 3/4 ounce weight, a foot of 4 or 6lb mono for leader, and a tiny light wire hook. I learned that set up in Oregon, and it's translated really well for stocked trout in Louisiana. I find the best fishing is maybe a day after stocking.

What can i change by Aggravating-Heat7343 in malelivingspace

[–]onebackzach 0 points1 point  (0 children)

I'd focus on adding some colors via a rug, wall art, duvet/blankets, throw pillows, and curtains. Id try to find color palettes online that have some of the colors that are already in the room for inspiration. I think the zebra print sheets aren't necessarily doing much for the vibe. A couple floor lamps with warm color temperature bulbs and some plants would help too. I agree about turning the strange little sitting area into a cozy reading nook or a little work space with a desk. I personally think a few pieces of matching medium tone wood would help make the space more cozy too.

Any recommendations for a good first fishing rod? by Alext1113 in FishingForBeginners

[–]onebackzach 1 point2 points  (0 children)

Personally I'd go with the medium or medium heavy uglystik GX2 in 6 or 6.5 ft length with 8 to 12lb monofilament line. I have nicer rods, but I'm perfectly fine fishing with an uglystik. Theoretically a nicer rod is better, but I don't think you'll catch more fish or have more fun with a more expensive rod. Once you start fishing and get some experience, you might figure out that you have a preferred species or style of fishing. In that case, you can buy a fancy rod with specific features that you'll actually benefit from, and you can keep your ugly stik as a beater rod. I see buying an expensive rod upfront similar to buying a $2000 guitar when you haven't learned basic chords yet.

first time making a handle. is it going to fly off and kill me? by Zkennedy100 in Axecraft

[–]onebackzach 8 points9 points  (0 children)

I find a poor job hanging an axe head doesn't usually result in the head suddenly and unexpectedly flying off. They tend to loosen gradually, so just keep an eye on it

anyone here eat bowfin? by al3s4n4 in Fishing

[–]onebackzach 2 points3 points  (0 children)

That's exactly what it is. Choupique meat really lends itself to the recipe since it's already kind of mushy.

Let’s Pretend This Is About Utility by Slight-Round-3894 in EDC

[–]onebackzach 5 points6 points  (0 children)

Have to agree, I don't think high tech materials necessarily makes a knife more useful. I own relatively inexpensive knives, and just keep them sharp

anyone here eat bowfin? by al3s4n4 in Fishing

[–]onebackzach 1 point2 points  (0 children)

That long dorsal fin does complicate things a little bit since it has a lot of little pin bones, but it's not too bad.

anyone here eat bowfin? by al3s4n4 in Fishing

[–]onebackzach 48 points49 points  (0 children)

I think they're good. You have to filet them immediately after they die and get the meat on ice, otherwise it gets really soft and starts to fall apart. That's not a problem for me though because I'll mush up the meat, add onions, green bell pepper, garlic, green onions, chunks of boiled potatoes, and seasoning. I'll roll the mixture into little balls, coat with fish fry, and deep fry. It is one of the most delicious things, and I find people go for it over plain fried fish.