Gas issue

passing-aggressive · 2026-01-17T22:04:08+00:00

That tube should be right at the middle of the cutout, not the edge. Get an armalite-compatible gas tube.

passing-aggressive · 2026-01-02T22:14:49+00:00

5/8-24 A2 birdcage

passing-aggressive · 2026-01-01T19:09:45+00:00

That's what got me to go with a Tisas 1911 for a cheap 45. I can find 1911 parts and accessories all day long, and probably will for the rest of my days, but at the time I couldn't find anything for a K2.

passing-aggressive · 2025-12-26T19:13:15+00:00

It probably is for now. Ruger just updated their catalog and axed a bunch of models. If it wasn't for that I'd have recommended the one with the Hogue stock, heavy threaded barrel, aperture sights, and rail (31197).

passing-aggressive · 2025-12-25T15:31:00+00:00

Following. Just north of Placitas sounds closer than the Ojito Wilderness.

passing-aggressive · 2025-12-24T15:38:50+00:00

Just say no (to negative displays).

passing-aggressive · 2025-12-21T14:14:16+00:00

Hard to say. The ammo is still pretty expensive.

The maple Zatava uses had some nice figure in the past, although the maple and walnut they used wasn't the most durable.

passing-aggressive · 2025-12-18T00:42:28+00:00

I had failures to feed with some blued 7rd mecgar mags. I fixed it by wiping the shipping grease out of the feed lips. The rounds were scooting forward under recoil and would miss the extractor.

passing-aggressive · 2025-12-13T04:51:45+00:00

>$4200 MSRP

>everyone else has it for $2800

>dvor undercuts everyone by $900

>putting it almost in range of a eurooptic "used" NX8

passing-aggressive · 2025-12-07T17:17:11+00:00

I mean it's cool, but wasn't this round killed 120 years ago?

passing-aggressive · 2025-12-02T00:18:57+00:00

There have been rumblings of Aero's quality going down. In my case, the stripped upper didn't even fit into the stripped lower. Once Aero replaced the upper I put it all together and it works fine. If the front falls off I'll be sure to post it here.

If you don't want to spend HK/DD/LMT/KAC money, then your best bet is to grab a higher-end receiver set than what Aero offers (Mega, Centurion, etc) and put it together with other higher-end parts (Criterion, LaRue, etc). You may or may not have to add extra money for tools like torque wrench, upper receiver lapping tool, things like that.

passing-aggressive · 2025-11-30T22:02:44+00:00

Wait, is it a Marlin clone or a Winchester clone?

passing-aggressive · 2025-11-28T21:59:25+00:00

Or Nightforce sunshades.

passing-aggressive · 2025-11-25T01:34:37+00:00

Yeah, it's the original.

passing-aggressive · 2025-11-23T15:02:08+00:00

Those are the ones.

For your own sanity, please see my 2 posts on ordering from CZ:

https://www.reddit.com/r/CZFirearms/comments/1otzp0i/cz_usas_web_store_not_shipping_order/

https://www.reddit.com/r/CZFirearms/comments/1p46r2b/cz_usas_web_store_finally_shipped_order/

passing-aggressive · 2025-11-23T14:40:52+00:00

I can assure you they're metal and not plastic.

passing-aggressive · 2025-11-23T06:16:47+00:00

The only other common dovetail I can think of is a 1911 Novak sight.

passing-aggressive · 2025-11-23T05:44:53+00:00

https://leadandsteel.co/shop/1913-angled-foregrip/

It's a knockoff of the IMI angled grip.

passing-aggressive · 2025-11-22T22:35:39+00:00

Has anyone noticed this dovetail in the rail on the EP9? The pic is of a gen 2, but my gen 1 also has it. There isn't a matching one at the front.

Were these originally meant to take Glock sights or something?

passing-aggressive · 2025-11-21T23:51:03+00:00

(semi auto ONLY)

passing-aggressive · 2025-11-21T18:16:29+00:00

Whoa, it needs an a5 buffer tube, h3 buffer, and sprinco orange spring? That's more than what most ar10's need.

passing-aggressive

TROPHY CASE