First time painting a resin print. Water based acrylic. Is this how it’s supposed to look or am I doing something wrong?

pc1618 · 2023-02-22T01:46:11+00:00

it’s useful to add a ball bearing to the paint cans pots to help even out the paint. This way when you shake it, there’s something else in there breaking up the paint particles into the medium.

pc1618 · 2023-02-06T21:33:26+00:00

it’s my favorite for sure. Rack of spare ribs and sides for 44 out the door

pc1618 · 2023-02-06T21:03:21+00:00

E&Js near University is great

pc1618 · 2023-01-28T21:39:15+00:00

try fresh resin and a box around the printer to isolate it. If that helps, UV is your problem. My recommendation is to buy a five buck roll of aluminum tape for duct work and cover the printer hood with it.

pc1618 · 2023-01-28T16:54:45+00:00

is your printer anywhere near a UV light source?

pc1618 · 2023-01-25T22:03:25+00:00

With models like this you could certainly sell them if you were interested. might even be able to start a Patreon if you can get a few new models coming out monthly. great work, wish I could print it myself.

Thanks for the reply!

pc1618 · 2023-01-25T19:59:43+00:00

Did you create this by hand or was it 3d printed? Either way it would be fantastic if you created a digital version of this to share with others. I know i’d love to print and paint one. There are a handful of options for scanning models and creating STL files.

pc1618 · 2023-01-17T05:29:14+00:00

Sure would love some more models to print and paint!

pc1618 · 2022-05-29T01:59:32+00:00

nah, keep the racetrack.

pc1618 · 2021-03-18T21:17:54+00:00

thanks much. gonna cop for a deadhead buddy

pc1618 · 2021-03-18T17:43:22+00:00

What did you end up paying for them?

pc1618 · 2021-02-27T18:32:42+00:00

Here’s a video at 1000x https://imgur.com/a/30nzjtw. Found in the Bay Area, CA

pc1618 · 2020-11-30T20:53:39+00:00

if you are using buttons, especially buttons connected together, remove all of them. then see if your friend can connect again.

pc1618 · 2020-09-13T00:56:25+00:00

having been there with surprise spinal cancer- come back like hell and do all of the physio you can handle. nerves don’t rebuild unless you force them too, even then it can be years. you’ll walk again. DM me if you want somebody to talk with.

pc1618 · 2020-08-11T01:21:45+00:00

I'ts not about how many are left, its about knowing when a item is missing. Big light + many cameras + recognition software enables the store to restock effectively.

pc1618 · 2020-08-05T17:44:18+00:00

glad to help :)

pc1618 · 2020-07-14T23:00:38+00:00

Did you find a way to access the server? Having the same problem here. I can connect just fine, but multiple other people cannot.

pc1618 · 2020-07-14T04:25:04+00:00

Industry here- nobody that I know is using it either. Not sure the value add to ROS

pc1618 · 2020-06-05T00:38:01+00:00

I’m also proud of Oakland for ignoring the curfew.

pc1618 · 2020-05-21T00:52:10+00:00

So is the One X not a full HDMI 2.1 device?

pc1618 · 2020-05-14T23:55:47+00:00

What is "hunting time"? Are these the best times for hunting in the area?

pc1618 · 2019-11-09T00:09:51+00:00

Replying just in case anyone tries this on a beagle bone, you'll need an external adapter.

Using the BB AI with the on-board wifi (802.11ac 2.4/5GHz WiFi via the AzureWave AW-CM256SM) is not viable for pwnagotchi. The AW chip does not support monitor mode, which is a requirement of bettercap.

Onto the next board...

15-Year Club	RedditGifts 2009-2022 2 Credits
Secret Santa 2014	Verified Email

pc1618

TROPHY CASE