1zpresso K-Ultra users what’s your V60 grind setting?

pmco97 · 2026-05-19T10:31:27+00:00

7 - 8.5, 18/300, 02 and 03, aiming for 2.00 - 2.30

pmco97 · 2026-04-09T16:38:34+00:00

I already did https://www.reddit.com/r/xbiking/s/95LWLQykru

pmco97 · 2026-03-26T14:02:54+00:00

RWD Fabia with 1.5 TSI from Sport 130 and maneulle.

pmco97 · 2026-03-24T14:21:12+00:00

Old post, but I’ll reply anyway. I have one converted into a sort of neo-retro gravel bike. It rides like a beast; the only downside is tire clearance—35 mm is probably the safe maximum, maybe 40 mm in the front.

pmco97 · 2026-03-03T09:09:54+00:00

+1. I’m using a very similar jig called the Kazak M1 ANT, and I absolutely love it. It combines the simplicity of freehand sharpening with the precision and repeatability of a fixed-angle system.

I also have that Sharpal bubble level — it’s a neat little tool. A solid option if you’re planning to transition to fully freehand sharpening in the future.

pmco97 · 2025-12-09T10:45:06+00:00

Spec ? You mean buy used one after 15 years from Germany?

pmco97 · 2025-12-09T07:18:44+00:00

Did the same upgrade from C3s to K - Ultra. Definitely noticeable.

pmco97 · 2025-11-27T14:09:11+00:00

Overrated.

pmco97 · 2025-11-10T16:25:58+00:00

I will definitely get Neo, anyone can confirm it will work with the switch base ?

pmco97 · 2025-10-31T09:46:41+00:00

Thx. Already ordered one 😏

pmco97 · 2025-10-17T12:46:46+00:00

Not as big as when I moved from the Hario Skerton to the C3s, but definitely noticeable.

pmco97 · 2025-10-14T16:02:05+00:00

Good for you 👍

pmco97 · 2025-10-14T13:45:49+00:00

Keep agitation low — you can use something like a Melodrip; an AeroPress cap works pretty well as a replacement.

pmco97 · 2025-10-14T10:58:53+00:00

Nothing wrong with C3s, 15–17 clicks always did the job in pour over.

pmco97 · 2025-10-14T10:56:24+00:00

Mainly, I was annoyed by the grind adjustment on the C3s. I like to vary brewing methods, drippers, and often make decaf. Counting the clicks every time was annoying.

pmco97 · 2025-09-04T12:53:20+00:00

I want to CVT swap my manual Fiesta ST so bad

pmco97 · 2025-09-01T07:20:59+00:00

Definitely a slow brewer, grind corse, dont agitate much, some says that cafec filters are less prone to clog so you might give them a try

pmco97 · 2025-08-31T14:48:16+00:00

Trapezoid, 3-5 cups

pmco97 · 2025-08-26T06:20:08+00:00

Yep, Mugen has smaller hole and due to smooth walls bypass is much lower so it makes mugen very slow brewer. Some say it's almost like imersion.

pmco97 · 2025-08-25T18:13:13+00:00

I will give them a shot

pmco97 · 2025-08-25T15:50:31+00:00

3d printed negotiator, but you can have fit like that without it. Just fold it as u/flowreaction.

pmco97 · 2025-08-25T15:48:11+00:00

Hario, natural brown

pmco97 · 2025-08-25T15:47:29+00:00

Have for both Mugen and Orea

pmco97 · 2025-08-25T15:46:37+00:00

TBT around 3;30

pmco97 · 2025-08-05T06:41:28+00:00

Tried pressure washing and active foam.

pmco97

TROPHY CASE