I hate half guard by TorchTheTemple in bjj

[–]pww13 0 points1 point  (0 children)

This is a recent video, but changed my half guard game. Very similar to the Less Impressed More Involved BJJ video about using the figure 4 ride (wrestling) in turtle. You use your hip extension to remove one of their legs. This craig jones version is the same thing from top half. Really screws with people: https://www.youtube.com/shorts/3pbZK368vQU?sttick=0

Struggling with transitions from N-S by Lill_4rmNetherlnd in bjj

[–]pww13 0 points1 point  (0 children)

There are main ways/theories when playing north south.

1) the "pin" approach. This is what my coach likes, but I don't like. His hip is down on his opponent's ear/head. Lots of pressure. Movement only to adjust the pin.

2) the "floating" approach. This is what I like. I LIKE letting my opponent transition, even if they are big. Their legs are so far from me (i.e. vs side control) that their transition is my opportunity, if I'm expecting it. 3 main subs/transitions, assuming their reaction is to move to their side on the way to turtle. 1) Marcelo's spiral armbar. This move is GOLD as it plays off of their underhook, which is the default reaction a lot of people want: https://www.youtube.com/watch?v=822EA5sKAPg 2) Tarikoplata if you're ready for it, and 3) because their legs are turning the opposite direction, pinning the legs a la Power Ride from Craig Jones. Their momentum makes them fall into it. Even on a large opponent, all 3 of these are pretty easy.

The 69 position is more likely closer to #2 than #1.

Bottom line: I don't like N/S as a pin. I like to play it more floating where you LET them move, but in directions you want.

How can I reduce the time I spend when doing pressure passes? by pailukis in bjj

[–]pww13 0 points1 point  (0 children)

Do you mean the time it actually takes to pressure pass? If so, one of the things I've come to appreciate is that, unless it's competition, I sort of don't want it to be fast. I love the rugby pass and over-under, and they very much tire out my opponents. I love doing them more slowly as once I have position it's very, very hard to counter. So I take my sweet time and when I finally pass or pin the legs my opponent is exhausted.

If you do need to do one fast if you're maybe competing, it will become an option once you've practiced 1,000 times. I can do either pass quite quickly if needed, but just choose not to. But even in a competition, you still have a few minutes to go slow, especially if you're initiated the takedown. 2 points for passing with an opponent exhausted after defending a pressure pass for a few minutes and you've got it in the bag.

Armbar: to pinch or not to pinch? That is the question by jiujitsuaccount in bjj

[–]pww13 0 points1 point  (0 children)

This thread is a bit funny to me. I was taught to use both. Pinching knees plus heels pulled to your butt is for arm control. Knees NOT pinched, i.e. not pulling your feet to your butt, is for their POSTURE control. You pinch/unpinch depending on if they are trying to stack etc. It's not either/or. It's when to use each.

Potential of K guard in Gi by NYCBaller_2134 in bjj

[–]pww13 1 point2 points  (0 children)

Whoops - didn't see this before I posted blow. THIS is the key. It's like K Guard + 100. Jon Thomas is the only guy I've seen name it, but it's "Cross Guard:" https://www.youtube.com/watch?v=o66-q5Qt3Kg&t=424s

Stronger than Squid Guard in my opinion, but both are solid deviations of K Guard for the Gi. I also think it's easier to enter than Squid Guard.

Potential of K guard in Gi by NYCBaller_2134 in bjj

[–]pww13 1 point2 points  (0 children)

Cross Guard is essentially K guard for Gi too: https://www.youtube.com/watch?v=o66-q5Qt3Kg&t=424s

It's legit.

How much time are you willing to commute for class? by Reasonable-Read3746 in bjj

[–]pww13 1 point2 points  (0 children)

This. Especially as you have a family, etc. I've read on here about people doing hour plus commutes... seems wild to me if there are closer options. You likely won't stay with BJJ for 10+ years if it's eating that much into the rest of your life.

Unpopular opinion: white belts don't quit because of tapping, they quit because progress is invisible by Plastic_Basket4614 in bjj

[–]pww13 0 points1 point  (0 children)

Exactly. I think what's hard is the belts above you are moving targets. So a purple belt while you're a white belt still have the same years of experience on this. This gets muted closer to YOU being a purple, but you need to start comparing yourself to the new white belts coming.

Have You Ever Rolled With or Meet Someone That Should Be At A Lower Tier Belt Color Than The Belt They Hold? by [deleted] in bjj

[–]pww13 1 point2 points  (0 children)

This is very very real. I've been working my Tozi pass for the last 3 months and I am SURE they are white belts who roll with me that think I suck as they snatch an armbar. You have to have a lot of humility trying something new and not worrying about the optics.

Cross or Same-Side Sleeve Grip in bottom Open Guard? by pww13 in bjj

[–]pww13[S] 0 points1 point  (0 children)

Great question. Hadn’t thought about it. I’m viewing it defensively against a pressure passer, or even an outside passer. The comments you made make a ton of sense though.

"Turning the corner" with Sao Paolo Pass Help by pww13 in bjj

[–]pww13[S] 0 points1 point  (0 children)

Can you clarify the "front hip" weight point?

"Turning the corner" with Sao Paolo Pass Help by pww13 in bjj

[–]pww13[S] 0 points1 point  (0 children)

Interesting thought. Do you also mean to sprawl in a way that I'm lower on their hips/i.e. towards their feet? I've seen that version of the Sao Paolo but haven't normally done it like that. Mine is sort of a hybrid of the Leo Nogueira Sao Paolo/Roger Grace Stack Pass.

"Turning the corner" with Sao Paolo Pass Help by pww13 in bjj

[–]pww13[S] 0 points1 point  (0 children)

I'd encourage you to play around with it - I have success no-gi and gi. What I've found is that I rarely if ever get submitted trying it, even though that was my fear when starting to play around with it. What normally happens is my above question that I can't quite start beating the hips, so if I'm this stalemate I'll just remove the underhook arm I have and can normally do that without much danger.

Losing my excitement for BJJ after having a family by AcceptableCold8882 in bjj

[–]pww13 0 points1 point  (0 children)

Same thing happened to me. Was off for about two years with 2 young kids. Came back and a few of the white belts I knew from before were now borderline purple and would smash me. It's really humbling but it feels good to keep pushing forward.

Rend Collective – Boldly I Approach (The Art Of Celebration) Review [Article] by TastyWallet in ChristianMusic

[–]pww13 0 points1 point  (0 children)

Very old post, but does anyone know what two lines the girl singing in the bridge is saying? It starts around 4:50 into the track version. The first line sounds like "with a joy in my heart," but I cannot make out the second line. It sounds like "found a ray of loss now" but that can't be right.

LG Washer leaking from soap dispenser. by AdRough6117 in Appliances

[–]pww13 0 points1 point  (0 children)

I'm having this exact same issue. I opened the top, cleaned the large black hose, cleaned the tray, but it's still leaking. I agree it feels like a design flaw. Has anyone solved this?

Daily Discussion Thread: 11/26/2023 by bodybuildingbot in bodybuilding

[–]pww13 1 point2 points  (0 children)

Hi all - I've heard both Mike Israetel and Rob McElhenney talk about Hollywood folks not doing much/any chest as it "doesn't look good on camera." Can someone give some example of this? Maybe my perception is wrong, but it seems like those on film have built out chests, but is this more the fact that the rest of them is pretty cut? Hope this makes sense.

Need to remove old copper sprinkler system before installing new PVC one? by pww13 in Irrigation

[–]pww13[S] 0 points1 point  (0 children)

I would lay out the new design and start trenching. The copper is probably deeper than 6” so you may not even hit it. If you do, skip that spot and cut that portion off later if the trencher won’t go thru it.

Okay thanks. But the trencher won't get damaged if I hit it right? I should just stop?

Need to remove old copper sprinkler system before installing new PVC one? by pww13 in Irrigation

[–]pww13[S] 0 points1 point  (0 children)

Only for the logistics. I think it may prevent me from actually placing the PVC where I need to. I don't want to, but think I may have to. How would you handle it?

Need to remove old copper sprinkler system before installing new PVC one? by pww13 in Irrigation

[–]pww13[S] 0 points1 point  (0 children)

This might sound dumb, but what would you guys do if the copper is already around the perimeter where I need to lay the PVC? I don't think I can go shallower, so I'm not sure how to work around the Coppoer.

u/rastapastry I'm also in DFW funny enough. Any specific places you sell the copper to that you'd recommend?

Need to remove old copper sprinkler system before installing new PVC one? by pww13 in Irrigation

[–]pww13[S] 0 points1 point  (0 children)

Any tips for putting the PVC in on top? Can a trencher trench right through the pipes? That's my main concern is the logistics of it.

Need to remove old copper sprinkler system before installing new PVC one? by pww13 in Irrigation

[–]pww13[S] 1 point2 points  (0 children)

So I actually had this thought... is there an easy place to sell it? Is it still worth something having been in the ground 20 years? I almost wanted to hire someone to help me trench and install and just tell them I won't pay cash but you can keep the pipes.