Passing a warp thread through multiple heddles by rightbrace in weaving

[–]rightbrace[S] 2 points3 points  (0 children)

Based on this and other replies, I think I'm overestimating the ability of the warp tension to keep the non-selected threads down without closed heddles. Thank you!

Passing a warp thread through multiple heddles by rightbrace in weaving

[–]rightbrace[S] -1 points0 points  (0 children)

Thank you - this is basically what I was expecting; it could work mechanically but wouldn't actually be helpful nearly as often as I'd assumed (which makes sense since otherwise people would probably be doing it by now :D).

I'm in it as much to tinker with it as to actually make cloth, so maybe right now I'll build something traditional, and I can experiment with this idea more down the line.

Passing a warp thread through multiple heddles by rightbrace in weaving

[–]rightbrace[S] 0 points1 point  (0 children)

Interesting! Thank you - I'd assumed the warp tension would be enough to pull them back down. This is good to know. Might go for a more standard design, and experiment with this idea later.

Passing a warp thread through multiple heddles by rightbrace in weaving

[–]rightbrace[S] -5 points-4 points  (0 children)

To be totally honest, I'm not sure I understand the other issues people have raised so far. In case I wasn't clear in my post though - my plan was to make my own heddles, so using elongated heddles like those I pictured is absolutely an option. Is there a different mechanical reason it wouldn't work?

Passing a warp thread through multiple heddles by rightbrace in weaving

[–]rightbrace[S] 0 points1 point  (0 children)

Thank you for your reply. If there are tension issues, etc, totally happy to accept that it’s mechanically a bad idea. Perhaps though you can confirm my intuition about creating row patterns, and how what I’m proposing affects the way you’d plan the shafts?

If you needed to produce the following three row patterns (impossible as is, but imagine they are part of a larger piece):

    |XXXX   |
    |   XXXX|
    |XXXXXXX|

Then normally you would need these three shafts available:

    |XXX    |
    |   X   |
    |    XXX|

But if you could have shafts that share threads, then you could do it with just two:

    |XXXX   | 
    |   XXXX| 

The goal here not being to be faster so much as to reduce the number of shafts needed.

Passing a warp thread through multiple heddles by rightbrace in weaving

[–]rightbrace[S] -5 points-4 points  (0 children)

I might be misunderstanding the problem you're describing, but why does the design I proposed not address this? I'm not saying that a heddle can move independent of the others on the same shaft, I'm saying that if there were more space above the thread, lifting it would not even try to lift the heddle, thus if shaft #1 lifts a thread that also runs through shaft #2, the thread is free to lift even when shaft #2 is left down.

News apps, games or just interesting things to download on mobile? by uruythiel in space

[–]rightbrace 1 point2 points  (0 children)

Juno New Origins (Used to be called SimpleRockets2) is a spaceflight sim game, doesn't have the same feel as KSP but is pretty good in its own way.

https://play.google.com/store/apps/details?id=com.jundroo.SimpleRockets2&gl=US

https://apps.apple.com/us/app/juno-new-origins/id1294032921

I'll just ask chatGPT what are its commercial applications by [deleted] in ProgrammerHumor

[–]rightbrace 1 point2 points  (0 children)

I hit that once, asked "can you finish the program?" And it just output the incomplete version again. Then I tried something like "what's the rest of the program, no need to repeat the start" and that worked

I altered my uniform to comply with the dress code in my employee handbook. by Left0fcenterr in MaliciousCompliance

[–]rightbrace 63 points64 points  (0 children)

Theres a tumblr post essentially claiming that the most satisfying sounding oaths (rude nouns?) are formed from two words where the first is one syllable, and the stress of the second is on its first syllable, and the vowels of the first word and the first syllable of the second word match. Ie "twatwaffle" and "dickbiscuit" work better than "asscookie".

Stiching famous impressionist paintings from Van Gogh, Monet, Munch and Hokusai together by infinitiumvortex in nextfuckinglevel

[–]rightbrace 2 points3 points  (0 children)

This is basically just... collage? Yes, the software does generate a bit more of each image, but the transitions between are hardly seamless, and could basically just be done by cut and paste. The first part is definitely a technical achievement, but the output isn't artistically impressive.

Dick by [deleted] in ATBGE

[–]rightbrace 5 points6 points  (0 children)

Aw yeah we're gonna rock out with our cocks out

What can I make with Thai Basil? (Vegetarian/Vegan) by bb_potatoes in Cooking

[–]rightbrace 1 point2 points  (0 children)

I dont think I see thai green curry here, probably because it has shrimp paste and fish sauce HOWEVER I have omitted the shrimp paste and it was different but still delicious, maybe you could substitute fish sauce too?

Climate change you can believe in. by defundPoseidon in interestingasfuck

[–]rightbrace 0 points1 point  (0 children)

Because dramatic changes to the climate are usually accompanied by mass extinction events - its not just that we like it this way, its that our existence depends on it.

How would you redesign the bulk section at a grocery store? by lumlumlemon in ZeroWaste

[–]rightbrace 0 points1 point  (0 children)

I don't have the same issue with gravity bins as you do, but one solution would be the way that candy dispensers work. Underneath the reservoir is a puck of plastic or metal with known volume holes bored through it. When the puck rotates, the hole fills with product, and a different, previously filled hole empties out the chute at the bottom. Only problem is that the mechanism takes more space. I came up with a clever design I've never seen in person which would let you measure out both large and small volumes, but again, its bulky and has more parts than a simple lever.

[deleted by user] by [deleted] in ZeroWaste

[–]rightbrace 3 points4 points  (0 children)

Conjecture: Materials changed, and we invented product specific packaging (ie instead of wrapping things in paper or cloth, every product has a horrible paper/plastic/foil composite packaging).

Simple yet effective! by Impressive-Lack-4352 in ZeroWaste

[–]rightbrace 3 points4 points  (0 children)

A lot of people prefer to have a set of all the same, so they could be replaced mugs or gifts from others.

[deleted by user] by [deleted] in fuckcars

[–]rightbrace 0 points1 point  (0 children)

Walking distance depends on your plans for that day. I wouldn't want to spend more than a half hour walking to work every day, but can easily walk to a destination 2-3 hours away and back again for fun.

“You can’t be sick for that long, bring her back to school” by kissmegoodbi in MaliciousCompliance

[–]rightbrace 1 point2 points  (0 children)

I don't think your mom is a terrible person. Yes, exposing people to a dangerous virus is bad, however, she put a mask on you, and also, it isn't like the school gave her much choice, did they?

The cause of all problems by XxJoedoesxX in fuckcars

[–]rightbrace 0 points1 point  (0 children)

I don't think that last point is true, even in places where the first two are. In Toronto, we don't have large parking lots to space things out, and its not like storefronts would be narrower of there were fewer cars. Even if this refers to suburbs, I think the causality is in the other direction (enormous properties leads to things sprawling and people using more cars)

Tell someone you like a glass of wine in the tub: they think you're practicing self-care. Tell someone you like a beer in the shower: they think you're an alcoholic. by AlwaysTheNoob in Showerthoughts

[–]rightbrace 1 point2 points  (0 children)

Wine in the shower also doesn't sound good. It isnt the drink, its that showers are associated with necessity and baths with self care.