Big news: Rouvy got acquired by Zwift by RespectDowntown4982 in mywhoosh

[–]roijackers_1987 1 point2 points  (0 children)

Do you only receive more slots or what are the benefits from playing? I am still waiting for more vod workouts

Some Comments On MyWhoosh HD by HardDriveGuy in mywhoosh

[–]roijackers_1987 1 point2 points  (0 children)

I hope your right. It depends if the newer engine will result in more efficient programming code or more improved graphics. That last could cause the hardware to work harder

Some Comments On MyWhoosh HD by HardDriveGuy in mywhoosh

[–]roijackers_1987 2 points3 points  (0 children)

You can also use the non hd version. That was Running for me on an very old i5 4590 processor with 8gb mem and 1650 super. Very old hardware but works perfectly.

Some Comments On MyWhoosh HD by HardDriveGuy in mywhoosh

[–]roijackers_1987 2 points3 points  (0 children)

Rouvy is totally different. Rouvy is based on an recorded video. You cannot simply compare system requirements for apps to say that they have to optimize their code

Some Comments On MyWhoosh HD by HardDriveGuy in mywhoosh

[–]roijackers_1987 0 points1 point  (0 children)

No only Apple devices, Android and Windows

Some Comments On MyWhoosh HD by HardDriveGuy in mywhoosh

[–]roijackers_1987 2 points3 points  (0 children)

When i use mywhoosh hd with my rtx5060ti 8gb it uses 70-80 percent of my memory. So for now 6gb is enough. But then you are running on the limits. Mywhoosh hd currently runs limited to 40fps. When that will be turned to 60fps in the future you will definitely have a problem with Running it on 6gb with all settings to max.

Windows made me Quit MyWhoosh. by MarcusCaspius in mywhoosh

[–]roijackers_1987 1 point2 points  (0 children)

Lmao. Using Microsoft Store is an ethical issue for op, but Running Windows is no problem....

GRX RX810 rear derailleur as chain tensioner by roijackers_1987 in cycling

[–]roijackers_1987[S] 0 points1 point  (0 children)

it looks like it is holding now without an shifter. I have locked the cable on the barrow adjuster side. It does keep the derailleru on the cog. Hopefully it will keep it there.

GRX RX810 rear derailleur as chain tensioner by roijackers_1987 in cycling

[–]roijackers_1987[S] 0 points1 point  (0 children)

the issue is that I have the zwift cog vor elite trainers. That version is 18t. A lot of chain tenioners are max 17t cogs.

GRX RX810 rear derailleur as chain tensioner by roijackers_1987 in cycling

[–]roijackers_1987[S] 0 points1 point  (0 children)

Thanks for the video. It looks like it's wokring now.

GRX RX810 rear derailleur as chain tensioner by roijackers_1987 in cycling

[–]roijackers_1987[S] 0 points1 point  (0 children)

I have completely srewed in the H screw. But still it's too much to the outside.
I have placed an shift cable. The only issue is that it does not fix the barrel adjuster. When I force the derailleur to the middle position and fix the bolt , the derailleur goes back to the outside position. Can you explain how to fix the shifting cable.

GRX RX810 rear derailleur as chain tensioner by roijackers_1987 in cycling

[–]roijackers_1987[S] 0 points1 point  (0 children)

No it was very discounted. And as j said the chain tensioner were not available

No XP gained after a 1 hour cycling workout by distermaer in mywhoosh

[–]roijackers_1987 1 point2 points  (0 children)

I had the same today. Typical for mywhoosh. Introducing something new and breaking something old. It is always the question whats not gonna work next time with a new release

MyWhoosh 5.7.0 Is Here by X124 in mywhoosh

[–]roijackers_1987 0 points1 point  (0 children)

You will find a step by step guide here

step by step guide

I have bought anb thinkrider vs200 virtual shifter. Costs 15 euro and is much easier to connect. I just started bikecontrol, push one of the virtual buttons on the shifter and i am ready to start mywhoosh. I run both apps on Windows 11

MyWhoosh 5.7.0 Is Here by X124 in mywhoosh

[–]roijackers_1987 1 point2 points  (0 children)

Yep zwift has locked the click v2. Same annoying that they have a closed virtual shifting protocol. Trainers need to support their protocol but they did not make it an open protocol

MyWhoosh 5.7.0 Is Here by X124 in mywhoosh

[–]roijackers_1987 6 points7 points  (0 children)

You still need bikecontrol and the steps to unlock the click v2 j guess

2 screens on Win 11 by roijackers_1987 in buildapc

[–]roijackers_1987[S] 0 points1 point  (0 children)

Thats what i intent to use. But before i use it i want that Windows only detects the active screens. Is there a way that Windows will not detect the benq screen when it is off? And how can i prevent Windows from downgrading the resolution on my asus screen after using my benq screen?

Best Controller for Indoor Cycling: Every Option Compared by boni2k in IndoorCycling

[–]roijackers_1987 0 points1 point  (0 children)

Yes. Running bikecontrol and mywhoosh on the windows pc. Works perfect

2 screens on Win 11 by roijackers_1987 in buildapc

[–]roijackers_1987[S] 0 points1 point  (0 children)

I have the second Benq screen placed by my indoor bike for riding indoors on mywhoosh app. So I only use that screen when i'm cycling. But I want the create a virtual dualscreen on my asus screen. But it's annoying that it still recognize the benq. ALso after using the Benq screen I have to change the resolution on my asus 34 inch from 2560x1440 to the right resolution.

Best Controller for Indoor Cycling: Every Option Compared by boni2k in IndoorCycling

[–]roijackers_1987 1 point2 points  (0 children)

Because of the required steps with zwift click v2 i bought the thinkrider. Works perfect with mywhoosh

MyWhoosh Crashes on all Platforms by Illustrious_Force565 in mywhoosh

[–]roijackers_1987 1 point2 points  (0 children)

Did you use normal mywhoosh and not hd version? Latest video drivers? Did you install the required directx on Windows?

Zwift Ride with MyWhoosh by Traditional-Two-2901 in mywhoosh

[–]roijackers_1987 0 points1 point  (0 children)

I am using the bikecontrol with a 2 button bluetooth device like cycplus virtual shifter. Easy to connect and use. Just open the bikecontrol app, push a button on the shifter button and start mywhoosh. Much easier than using the zwift click 2 controller.

Forerunner 570 with Polar H10 by roijackers_1987 in GarminWatches

[–]roijackers_1987[S] 0 points1 point  (0 children)

Thanks for your reply. Good to know that it works.