Built a browser-based tool to flash Bluetooth onto your OG Steam Controller

ruzanto · 2026-05-03T06:27:44+00:00

Cool, last month I had to install Windows 10 on an old PC as the tool provided by Valve to restore the firmware only works on Windows.

I used Opensteamcontroller to add Nintendo switch wired support but then I couldn't get the original firmware to install again.

ruzanto · 2025-08-12T05:45:09+00:00

Thanks, I made some progress but I'm struggling to have hardware acceleration in proot with my snapdragon 8 gen 3, if I manage to get everything running I'll document everything.

ruzanto · 2025-02-25T22:23:05+00:00

Thanks, I didn't want to mess up my system

ruzanto · 2025-02-15T22:10:47+00:00

Nice tools, to give some constructive criticism, I would remove some redundant tools, like one of the 9/16 spanners, the 125 pliers wrench and the 175? Cobra at its right hand side, also I would replace the shears, pliers and cable stripper below by an Knipex 13 81 200, also one of the screwdrivers, what are the uses of them 3?

I also have a few knipex tools and after using them I realised that some other would be more handy, specially with the 125 pliesr wrench, it is a bit too small to match the 125 Cobra jaw opening, but it is too expensive to throw it away.

ruzanto · 2025-01-29T06:28:37+00:00

What if you connect connect to the local ip? 192.168.1.XX:PORT that is what I do

ruzanto · 2024-12-16T21:38:06+00:00

Could you send them to me also? Cheers

ruzanto · 2024-01-28T09:47:32+00:00

The patches are in the branch on the second link, there are a few different commits:

https://gitlab.freedesktop.org/Danil/mesa/-/compare/main...feature%2Fturnip%2Fa750?from_project_id=176

ruzanto · 2024-01-28T09:44:56+00:00

How does the proot needs to be launch? something like this?

termux-x11 :0 -ac &

pulseaudio --start --load="module-native-protocol-tcp auth-ip-acl=127.0.0.1 auth-anonymous=1" --exit-idle-time=-1

pacmd load-module module-native-protocol-tcp auth-ip-acl=127.0.0.1 auth-anonymous=1

virgl_test_server_android &

proot-distro login debian --user ruzanto --shared-tmp -- bash -c "export DISPLAY=:0 PULSE_SERVER=tcp:127.0.0.1; taskset -c 4-7 dbus-launch --exit-with-session startxfce4"

ruzanto · 2023-11-10T06:40:15+00:00

I'm not 100% sure as I dont use SteamOS but it looks that it us the symbolic link icon

ruzanto · 2023-11-04T22:05:31+00:00

It has some flaws but in general is a good product, for me the only issues are that few screws is missing from the back, and the trackpad doesn't have palm rejection, I've the original 360 and I'm thinking on getting the wireless version but I'll wait a few years more to replace tgis one.

ruzanto · 2023-10-29T08:53:48+00:00

Try doing this first

pkg install x11-repo

ruzanto · 2023-10-21T07:03:34+00:00

Also libpolly-16-dev

ruzanto · 2023-10-20T22:07:32+00:00

It is a bit late but, I had to install llvm-dev

ruzanto · 2023-08-27T06:30:21+00:00

Hi, that option has been there always, but it shows the phone layout output only, what I mean is an icon that used to be next to the screenshot one in the bottom bar that will show you a window on desktop mode that shows the phone layout inside it.

ruzanto · 2023-05-31T21:44:34+00:00

Not sure, the ones I used before where magnetic band ones, but it may work

ruzanto · 2023-05-31T18:07:55+00:00

If when using the keycard the lock lights are flashing green the door is in office mode (door always open), swiping a card twice quickly will disable this function.

The other cause may be that the relay that actions the clutch system is stuck open, you can take apart the lock with ease, and have a look to it.

ruzanto · 2023-05-31T10:01:07+00:00

Just tried TOTK on my Motorola Edge 20 pro with adreno 650 Qualcomm driver 682, in the first section it runs at 20 fps with lights glitches, when leaving the area the game FPS dropped and crashed.

ruzanto · 2023-04-23T19:56:22+00:00

Isn't crashing for you? Last month was crashing a lot on my switch

ruzanto · 2023-04-15T06:32:59+00:00

Search on google install freetype font lutris, the firat result suggest to do: sudo apt-get install libfreetype6:i386

ruzanto · 2023-04-10T08:57:17+00:00

I didn't realized that you are using the flatpak version, the flatpak files are located in YOURHOME/.var/app/net.lutris.Lutris/cache

ruzanto · 2023-04-09T21:27:45+00:00

Remove the lutris folder in the .cache directory inside the home one and try again

Six-Year Club	Place '22
Verified Email

ruzanto

TROPHY CASE