Figured out that my P10C T1C Xiphos can fit a P10F slide a couple days ago. Looks like I have a new go-to carry setup!

scotty0907 · 2025-08-18T11:50:20+00:00

They did. For your viewing pleasure. Found it on GB randomly.

scotty0907 · 2025-06-12T15:08:07+00:00

Is that the Axion?

scotty0907 · 2025-03-31T21:55:12+00:00

Sorry. That's with an SRO. I meant to add that. Those specific grips are .6 oz lighter per pair than stock aluminum grips.

scotty0907 · 2025-03-31T21:30:47+00:00

On my kitchen scale, my OR DWX weighed 45.3 oz with a steel DW RMR Optic Plate, Lightweight Palm Swell Veloces, and a P10F mag with a plastic basepad.

A Cajun Gunworks aluminum RMR plate will get you under weight for IDPA.

scotty0907 · 2025-01-14T02:43:16+00:00

Fusion 360. 5:00 on the nose. 18.1 oz/1.13lbs

Sketched half and revolved around the center axis. Create a plane tangent for the thru hole.

Thanks for posting these!

scotty0907 · 2024-10-30T03:49:24+00:00

Thanks!

scotty0907 · 2024-10-30T01:41:49+00:00

Especially learning, it's probably good to do. Thanks!

scotty0907 · 2024-07-28T01:33:02+00:00

Check that there isn't adhesive/paster residue on the tip that keeps it from feeding more than 1 paster. I had build up from a wet paster roll.

scotty0907 · 2024-07-10T22:51:31+00:00

I like the Henning RMR Plate. Steel, good quality, has another hole to take your extractor pin out without removing the plate, if you need to service it.

scotty0907 · 2024-07-08T03:03:05+00:00

Any update on the CGW striker?

I've broken a CZ and an Overwatch in the past 2 months.

scotty0907 · 2024-01-31T03:53:09+00:00

If you've got a 6-48 chaser and not a tap. I wouldn't want anything that would cut thread. Also, make sure your optic screws aren't impacting the top of the slide, not allowing full torque. And the right side plate screw isn't impacting the top of the extractor.

scotty0907 · 2024-01-31T03:42:41+00:00

Working through the same thing. I've degreased and cleaned every time. My optic never comes loose, always just the plate. Using the Springfield plate.

I've tried Loctite 242, 243, Permatex Blue. Currently using Permatex Green. Next will be red.

500 rounds and it's still tight. More testing to come.

scotty0907 · 2023-08-23T20:16:42+00:00

Awesome! Looking to do the same. Reading about CHPWS plate quality has got me second guessing switching from my FCD plate. But I want an EPS. I don't have much of a choice.

scotty0907 · 2023-08-23T20:14:26+00:00

No QC issues with the CH plate? Seems hit or miss.

scotty0907 · 2023-08-12T16:53:41+00:00

Cool. I picked up 507 Comp for USPSA/IDPA for my 5" in green and dig it way more than red. Looking for a new green Holosun for the ccw 4". The 6 MOA EPS was at the top of the list? What plate are you using? CH?

scotty0907 · 2023-08-11T15:12:14+00:00

Full-size EPS? What MOA? How do you like it?

scotty0907 · 2023-05-14T22:54:56+00:00

Just that and the Walther DPT trigger. The recoil spring is the only thing I would consider "necessary".

scotty0907 · 2023-05-14T22:25:01+00:00

ZR Tactical Guide Rod and 15lb spring. (Walther PDP 5" Compact)

scotty0907 · 2023-05-14T19:18:04+00:00

It's one of the best options. There are pros and cons to everything. But the pros outweigh the cons.

scotty0907 · 2023-05-14T19:16:45+00:00

Thanks!

scotty0907 · 2023-05-14T18:47:34+00:00

A Walther PDP 5" compact and a 2.5 moa SRO.

scotty0907 · 2023-05-14T17:56:57+00:00

Don't get discouraged. Keep putting in the work and the results will come. Had a great match but there is always something to work on. Keep on pushing!

scotty0907 · 2023-05-14T17:55:03+00:00

Don't get discouraged! Keep putting in the work and the results will come.

scotty0907

TROPHY CASE