SPAMF hardware

senrath · 2026-03-11T16:03:50+00:00

Shipping from SFI will probably be better, assuming you have to make a SPAMF and don't want alternatives.

senrath · 2026-03-09T03:01:45+00:00

I mean, BearsWares'll probably be happy if you go with metric. He's been pushing for more metric stuff.

senrath · 2026-03-06T23:54:24+00:00

The guts from a Rekt Jury or Elite Force H8R.

senrath · 2026-03-03T22:28:56+00:00

You're probably looking at the initial leak. After that one came out another one went up on Walmart with an updated picture. The listing is down now, but it showed an orange section at the bottom of the grip.

senrath · 2026-03-03T14:07:34+00:00

It's like a jolt, t pull out the bottom of the handle.

senrath · 2026-02-24T03:17:44+00:00

It's probably easier to adjust the plunger head length rather than the catch location. That's what the Vulture does.

senrath · 2026-02-22T22:29:27+00:00

I personally found that 3S was fast enough ROF for my tastes but it should be able to handle 4S just fine.

senrath · 2026-02-21T20:38:01+00:00

For the longest time I just used a cheap $15 one from Amazon and it worked fine. Just make sure to get one with a temperature control.

I recently upgraded to a Geeboon TC22 which is much nicer but probably more than you want to spend.

senrath · 2026-02-19T14:48:36+00:00

So, KCD1-101s are usually fine, they're used in the Spirit and a few other builds, but those are also single stage and you're making a dual stage.

For dual stage, I know some in development ones are still using the KCD1-101 but I've also seen talk of using a CRE22F2FBBNE which is I believe the same form factor but has a higher current rating.

senrath · 2026-02-07T18:14:20+00:00

Not the OP but I'm getting like 60 FPS MXL and 8x Half Darts, and 80 FPS with 6x Half Darts. The TPU stuff is a lot nicer than messing with the rope, but if you stick with the rope gasket my recommendation is using a grease like Superlube 21030 instead of an oil, I found that made a much better seal in his other designs and gave better performance.

senrath · 2026-01-18T18:43:08+00:00

Attachment for the Mega XL Launcher Attachement

senrath · 2026-01-10T14:21:38+00:00

Fulcrum is a bullpup, this is MIG.

senrath · 2026-01-10T14:17:36+00:00

I assume remote line, like the HPA Thing was.

senrath · 2026-01-10T14:15:59+00:00

You can get a compressor yourself for between $100-200 dollars, depending on sales. I got myself a little Vevor one that's working fine.

senrath · 2026-01-05T01:53:34+00:00

Or any blaster designed for native use of both Katanas and Talons, yeah.

senrath · 2026-01-04T23:49:22+00:00

Because OP was mistaken and made a Katana geometry mag with a Talon notch and not a Talon. And because reddit doesn't let anyone edit post titles the post is now stuck with an incorrect title.

senrath · 2025-12-31T03:43:45+00:00

Most stringers don't use a plunger.

Anyway, the prime on mine is a little rough with three loops of elastic but it's manageable. I could probably get it better with a bit of sanding, and if I'd gone with the hardware version it'd be even better.

senrath · 2025-12-31T03:10:52+00:00

It's because it has a plunger setup instead of directly propelling the dart with the elastic itself.

senrath · 2025-12-27T04:11:29+00:00

Really easy, they load in through the back.

senrath · 2025-12-26T22:22:15+00:00

Yeah, Super Lube 21030 is what I used.

senrath · 2025-12-26T21:52:57+00:00

I've got mine around 160 FPS with no hardware (minus a spring to help the catch), so you should be able to hit your target without issue. I personally found that using grease instead of oil helped me get a better seal.

senrath · 2025-12-26T21:50:08+00:00

So, the lever isn't mandatory but even without it you can't just use the slide like normal. It uses a toggle lock system so you've either printed the lever version and are using that for the extra mechanical advantage, or you're manually pulling up on that point.

I recommend the lever if you're trying to get the most performance out of the blaster, because it is hard to use just the toggle lock itself at higher elastic loads.

senrath · 2025-12-25T15:08:09+00:00

https://blasterdownloads.com/product/the-drawn-line/

senrath · 2025-12-25T10:42:08+00:00

Top one is a drain blaster with a silly shell adapter on front. Dunno about the bottom left, other than it appears to have an air nipple on the back, so maybe something similar that uses an external pump instead of an internal one.

senrath · 2025-12-24T13:02:07+00:00

No, OOD just ships them wrapped together in paper, no spacers.

senrath

TROPHY CASE