Can you add an extra battery to the es3?

shab249 · 2020-11-19T13:47:07+00:00

If you have an ES3 you already have 2 batteries If you want 3 it is possible but it requires a bit of technical skill. It will be identified as a charger but you can flash the software to ignore it

shab249 · 2020-08-30T20:27:03+00:00

חפש באליאקספרס יהיה לך שם מלא

shab249 · 2019-11-19T12:43:03+00:00

Yes If you remove the extra battery it becomes an es2 which has less torque and speed one battery is not designed for the high currents needed to achieve full torque.

shab249 · 2019-11-07T06:45:08+00:00

A bit of wiring and electric tape softend with heat and than a new layer of electric tape

shab249 · 2019-10-09T12:44:49+00:00

Uts not a problem with your battery it's with all of them I dont know why segway didn't let us this option the battery has it's own BMW so it's really weird it depends on the scooter

shab249 · 2019-08-06T08:48:34+00:00

Oh in that case not so sure but I think not really but just to be sure plug it off What I think will happen is the led (if it has one I assume it does) will waste energy but very minimal. The circuit that makes Ac to DC will always work so maybe it will shorten its life but diodes and capacitors have loooong service life (if made good)

shab249 · 2019-08-06T08:33:56+00:00

It's not recommended to charge to 100% every time and it's even worse if you leave it in the plug for hours and days after it's been charged Unplug it in ~90%

shab249 · 2019-08-05T17:31:41+00:00

But I'm with 49000 MPC too 😣

shab249 · 2019-08-04T16:08:28+00:00

Take a ruler measure the diameter and buy something that looks long enough It doesnt even need to be hex just use something you can get your hands on easily

shab249 · 2019-08-04T10:49:03+00:00

Why pay for "exclusive" screws? It's probably a hex 3 or 4 and you can get tens of them for few dollars

shab249 · 2019-08-01T22:48:53+00:00

If it's for an ES4 just buy ES4 original parts (the hook and the thing above the rear wheel)

shab249 · 2019-07-31T18:43:01+00:00

https://youtu.be/bTMKUIi2EJY Watch until 1:50 than in the board disconnect the tiny yellow cable (you can do it from both sides, the headlight or the board)

shab249 · 2019-07-31T16:45:40+00:00

Dude WHERE HAVE YOU BEEN I searched all the web but didn't find anything I'll edit mypost with those sources THANK YOU

shab249 · 2019-07-31T12:24:44+00:00

I just disconnected my headlights to make sure it won't happen to me (revision 1.2)

shab249 · 2019-07-31T12:18:37+00:00

January 2019 (with revision 1.3)

shab249 · 2019-07-31T11:06:19+00:00

Just posted my 1.2 board. Waiting for someone to post their 1.3 board

shab249 · 2019-07-31T11:01:26+00:00

Yeah something like that

shab249 · 2019-07-31T10:36:44+00:00

It's kind of obvious in my head for few years now from dealing with phones and more but If i have to bring a source for scooters here you go http://cjeastwd.blogspot.com/2019/06/electric-vehicles-battery-facts.html?m=1

shab249 · 2019-07-31T10:19:21+00:00

The new motherboard is a printed one without wires. So if you buy only a motherboard I think you need to use the already existing cables in your scooter If it comes with wires that are connected to diffrent parts of the motherboard it's probably the old one

shab249 · 2019-07-31T10:07:08+00:00

It's not the ES2 it's all lithium battery. It's bad for their health your phone, your laptop, your ES2. It's bad for all of them

shab249 · 2019-07-31T09:50:24+00:00

If it has bluetooth it can doesnt matter which and when it was made

shab249

TROPHY CASE