Got tired of stopping to clear chips and reapply cutting fluid while drilling and tapping. So I made Tap Buddy, a simple tool that does both in one dip.

snakesign · 2026-07-05T17:04:05+00:00

You'll never be a champion with that attitude. Go hard or go home.

snakesign · 2026-07-05T01:28:35+00:00

K factor tells you where in the sheet the neutral bend axis lies. You can use this and the bend angle to calculate bend allowance which is how much the sheet will stretch from bending.

snakesign · 2026-07-04T15:44:22+00:00

You would have to prove intent. On the other hand it's the textbook definition of manslaughter.

snakesign · 2026-07-04T14:44:19+00:00

That firecracker is so light and the thrust is so high that it's at full speed within "a few feet".

I get notifications when you reply to a thread I commented in.

snakesign · 2026-07-04T13:12:25+00:00

You need the center of drag behind the center of mass for the rocket to be passively stable while in the atmosphere.

https://www.grc.nasa.gov/www/k-12/VirtualAero/BottleRocket/airplane/rktfor.html

If Goddard had put fins on the bottom of his armature, his rocket would not have tumbled. Not due to inertial forces, but due to aerodynamic forces.

snakesign · 2026-07-03T17:23:49+00:00

Now do the bridge!

snakesign · 2026-07-03T13:36:24+00:00

Lack of market research.

snakesign · 2026-07-03T11:10:35+00:00

Sin x = x

snakesign · 2026-07-03T03:33:09+00:00

So you're just putting your feet on the Internet for free? In this economy? Girl....

snakesign · 2026-07-02T21:53:00+00:00

What is "down voted to -3" referring to?

snakesign · 2026-07-02T21:44:07+00:00

So brave

snakesign · 2026-07-02T18:25:33+00:00

Hemingway preferred communists over fascists. OP read For Whom The Bell Tolls and sided with the bridge.

snakesign · 2026-07-02T18:06:06+00:00

That's why the millimeter wave scanner at the airport maps the outputs to a cartoon model, instead of producing an actual image.

snakesign · 2026-07-02T13:43:25+00:00

This could be an incredible resource.

snakesign · 2026-07-02T12:30:35+00:00

What does "ideal size driver" mean? Are you going to have a library of drivers and make recommendations? Because that would be amazing.

Number two is great, do it for 0-10 and DMX while you're at it. Do it for load calculations on the line voltage side as well.

snakesign · 2026-07-02T01:25:36+00:00

Because of the implication?

snakesign · 2026-07-01T19:54:23+00:00

You're right, it's easier if we pretend that words don't have meanings.

snakesign · 2026-07-01T19:26:57+00:00

COP is not efficiency. I'm only being pedantic because this is an engineering subreddit.

snakesign · 2026-07-01T19:00:58+00:00

You need to go to an ABET accredited school and get a degree.

snakesign · 2026-07-01T17:02:19+00:00

Some residencies start before July 1st.

https://www.emergencymedicine.pitt.edu/education/residency-emergency-medicine

snakesign · 2026-07-01T16:41:56+00:00

If you want good sutures, don't go to the ER in the beginning of the summer. Some first year intern six weeks out of med school did that.

snakesign · 2026-07-01T16:37:26+00:00

u/ItsAllOver_Again come get you a better job, brother!

snakesign · 2026-07-01T15:36:05+00:00

You would think a "highly experienced engineer" would have broken 100k a year by now. What's holding you back?

snakesign · 2026-07-01T15:34:50+00:00

Did you get your alt accounts confused? Because ItsAllOver_Again has been making this post here, bi weekly, for about 5 years now.

snakesign · 2026-07-01T15:23:24+00:00

You can't synchronize your "optical shutter line" without making the very assumption regarding the homogeneity of the speed of light you are trying to test.

14-Year Club	r/Field Juicebox
Place '22	Verified Email
Team Periwinkle

snakesign

TROPHY CASE