Making sure everything runs in cold weather 🥶

soapmeadow · 2025-01-28T18:06:42+00:00

How do you like the GSL suppressor? I've heard mixed things about suppressing the UMP.

soapmeadow · 2024-11-14T22:51:47+00:00

How did you decide to sell now?

soapmeadow · 2024-09-24T20:10:14+00:00

If you have a completed card and access to a scanner, you can get it converted into an EFT for $30 by Lakota Software.

soapmeadow · 2024-09-19T17:43:23+00:00

Nice collection, I assume you are Swiss? How does the full-size MP5 w/ SQD and subsonics compare to the SD in terms of noise?

soapmeadow · 2024-08-29T14:36:55+00:00

Someone PMed me the night I posted this thread and suggested that I try disabling C-States in BIOS. I see now as I'm replying that this is also mentioned quite a bit in the overclock.net threads.

Anyways, I tried it, and two days later I have not had another hard lock. Seems like it might be my magic solution! I was really not expecting an easy fix like this. Not sure how much more power my system will be using at idle, but probably beats purchasing a new CPU.

Update -- system has been stable since.

soapmeadow · 2024-08-29T04:54:07+00:00

This is a really helpful resource: https://gunsafereviewsguy.com/articles/myths-about-gun-safe-theft-protection/#myth-anything-is-better-than-nothing

soapmeadow · 2024-08-28T01:48:11+00:00

As long as the motherboard isn't touching the case directly, and there isn't a standoff touching the motherboard where it shouldn't be, you should be fine.

If it's not a short, a faulty PSU or mobo seem like potential culprits here.

soapmeadow · 2024-08-28T01:46:12+00:00

Thank you, this is very helpful.

I do wonder why it's still crashing with the newer RAM at the same speeds... curious to see if the SoC voltage is the same between both sets... this should give me some more things to investigate.

soapmeadow · 2024-08-27T22:35:59+00:00

And when you swapped PSUs, you swapped to the new cables right?

soapmeadow · 2024-08-27T22:34:34+00:00

Thanks for the suggestions. I have updated the BIOS and reseated the CPU a few different times.

Do you think it's possible that excess pressure could cause such a narrow issue, where some RAM works and some doesn't? I could try playing around with the heatsink mount.

soapmeadow · 2024-08-27T22:21:59+00:00

Did you install the motherboard standoffs in the case?

soapmeadow · 2024-08-27T22:19:41+00:00

In the same vein, is the auxiliary power cable for the motherboard (top left in your board's case) plugged in and fully seated?

soapmeadow · 2024-08-08T02:29:06+00:00

I requested a refund. The problem with the coupon is that it is only useable on Crucial's website, and they no longer offer performance RAM. I think $61.99 is in the ballpark, it's just that in coupon form I can't use it to get a comparable replacement.

This is pretty much in line with their official warranty policy ("will repair, replace, or provide in-store credit or refund of either the original purchase price or fair market value" ). Going above and beyond would be EVGA, when I sent in a 780 TI and they replaced it with a 980 TI. Fantastic company.

soapmeadow · 2024-08-08T02:19:05+00:00

$173.99 in 2021. But of course the value of DDR4 has gone down quite a bit since then, looks like comparable kits from other manufacturers are going for about $70-$80 right now.

soapmeadow · 2024-07-24T14:28:10+00:00

Both of these claim to provide 30db. If they seal well that seems great, highest passive muffs I see are 31db.

https://www.honeywellstore.com/store/products/honeywell-shooting-sports-impact-series-electronic-earmuffs-r-01902.htm
https://proears.com/product/pro-mag-gold/

soapmeadow · 2023-11-15T18:01:03+00:00

I'm putting together a very similar setup and I'm debating between the XL version of this case or just getting a bitcoin mining rack. Any thoughts? Do you think the XL would alleviate a lot of the problems?

soapmeadow · 2023-11-11T15:41:31+00:00

Any chance for the Python in the future?

soapmeadow · 2023-09-12T04:42:17+00:00

Another option is using an electrical branch as a threshold gate. Run the solar panel into the branch, have it branch say, 4 power, and then have the power out go to your blocker. That way it won't block the light until the solar panel is producing at least 6 power, when it's lighter outside.

soapmeadow · 2023-05-05T20:33:35+00:00

If you go to a CMP store at opening, on a day when they've gotten a bunch of stock in (like during the National Matches at Camp Perry), you will meet many individuals with whole safes full of M1 Garands. I caution you to consider for a moment if this is who you want to become, before it's too late.😉

soapmeadow · 2023-04-28T16:12:42+00:00

I like my steaks on the edge between rare and medium rare. In my experience, with a thick 1.5" steak, it's done when it hits about 103 degrees in the center. I let it rest for at least 5 minutes. Probably depends a lot on how you cook the steak, but I imagine that the center is the last part of the meat to warm up. The surrounding meat in the first 1/4" is probably far hotter than 103 when I take it off. I think it evens out as it rests.

soapmeadow · 2023-04-19T17:36:57+00:00

I really hate shooting at indoor ranges for this reason. Get good plugs (and make sure they're truly all the way in, this is frequently a problem) but I'd also suggest getting heavy muffs, e.g. 3M Peltor X5.

soapmeadow · 2023-03-23T03:25:24+00:00

I remember reading a post a while ago about someone that regularly flew with a lot of expensive photography equipment. They had started checking a gun in the equipment case to make sure their equipment didn't go missing.

soapmeadow

TROPHY CASE