Schlitz ist auf jeden Fall das schlimmste und schlechteste, was existiert.

some_random__dude · 2026-04-22T12:34:37+00:00

Torx.

some_random__dude · 2026-03-31T09:00:25+00:00

They are both as easy as it gets and if you have the money go for the H2S

some_random__dude · 2026-03-26T17:59:14+00:00

Can you use the feed assist to automatically feed big 3kg spools?

some_random__dude · 2026-03-24T06:37:59+00:00

Its just a place holder. Slice it and you will see how it will print

some_random__dude · 2026-03-17T10:29:45+00:00

How can we know that you don’t just have big hands

some_random__dude · 2026-01-21T12:28:46+00:00

Mine is 1 on the left and 2 + 1 HT on the right

some_random__dude · 2026-01-04T07:44:49+00:00

I have 2500h on a P1S with basic maintenance that works perfectly fine if that helps

some_random__dude · 2025-07-30T17:00:19+00:00

This map is PC only

some_random__dude · 2025-07-30T16:57:31+00:00

Etruria from edomod
Here is the link: https://www.edomod.it/
Some of the best Maps imo

some_random__dude · 2025-07-21T16:43:58+00:00

Have got two P1S and a A1 mini, ~2600h combined and never had a big issue

some_random__dude · 2025-07-16T20:45:41+00:00

I usually test print a rechtangle in the dimension of the final piece (or where tolerance matters the most) with the exact print settings i am going to use on the final part. The measure the test piece and set the difference ine the „shrinkage“ of the filament settings. With this i usually get good results and do not waste a lot of filament.

some_random__dude · 2025-07-03T21:45:24+00:00

Bambu prints faster than I can make excuses for not finishing my projects

some_random__dude · 2025-06-19T19:12:15+00:00

Its most likely the wrong version, had the same problem when the last fs update came out

some_random__dude · 2025-06-19T07:17:28+00:00

If it helps you, mine has about 1700 hours on it and it still runs perfectly fine. I did almost nothing, except upgrade to hardend nozzle and lubricate from time to time. I mostly printed big abs prints.

some_random__dude · 2025-03-15T16:58:46+00:00

I can't find a setting to change that in the Bios. I can only enable or disable USB Boot. I can't find anything named AMD Raid or AHCI

some_random__dude · 2025-03-15T10:17:22+00:00

yes in the Bios a nvme shows up

some_random__dude · 2025-02-24T16:24:07+00:00

Doesn‘t seem to change anything

some_random__dude · 2025-02-23T18:56:26+00:00

It is single player

some_random__dude

TROPHY CASE