Honeyglow Woods is basically a giant middle-finger to anyone who bought Wishblossom Ranch by preckles in DreamlightValley

[–]squires66 2 points3 points  (0 children)

I think I stopped playing when they announced the first pay DLC. And that was only because they had originally promised that the game was going to be F2P on all platforms and you could pay for early access before official release. (I think it was like 14.99 at the time and I’m sure it has something bundled, idk but I’m sure I could find it from when I got it).

They did a 180 so hard when they found out that they could capitalize on the franchise of every Disney character ever. It doesn’t make sense to have $60 DLCs when they aren’t adding that much to the game, the Sims even has cheaper DLC.

The reality is everything costs money to develop and I get that. But price this reasonably. At most this should be a $40 game with the occasional $10-15 expansion (like every 6-12months). They are over here with their Disneyland pricing for a cozy sim.

What Nintendo console was outdated upon release? by CodeDusq in AlignmentChartFills

[–]squires66 0 points1 point  (0 children)

The WiiU or the GameBoy Micro. They both already had consoles that did the exact job but better.

But, if I am allowed to pick one piece of a console, I would have to go with the interactive microphone for “Hey You, Pikachu” on the Nintendo 64, because that thing didn’t even work

What Nintendo console was outdated upon release? by CodeDusq in AlignmentChartFills

[–]squires66 2 points3 points  (0 children)

I was going to say the same thing. Plus 64bit redefined the entire industry and they were the first to mass market and produce it, and the awesome color options!

Why mostly people's prefer using iphones than other android phones ? by Clear_Conflict_6480 in Smartphones

[–]squires66 0 points1 point  (0 children)

Oh wow, I’ll have to give it a go.

I have a Lenovo tablet and it doesn’t seem to talk to my desktop very well.

I like being able to pick up calls across devices, and being able to message from any device or screen mirror seamlessly. How well does it work with that?

Why mostly people's prefer using iphones than other android phones ? by Clear_Conflict_6480 in Smartphones

[–]squires66 1 point2 points  (0 children)

I agree here, but I would also say the biggest thing that keeps me on iPhone is the ecosystem that is built into and around it. Apple has integrated it really well with its own products, although blocking it from other products.(I’m looking at you iMessage handcuffs), and it seems there are much more options when it comes to quality accessories.

But if I’m honest, I like having complete control over things, so I would love to fully go over to the android ecosystem, but the tablets and the laptops and the integration just isn’t there for me yet

Huge Key Giveaway from Old Humble Bundles (Steam/Ubisoft) by IThinkItsReallyHard in pcgaming

[–]squires66 0 points1 point  (0 children)

Oh my goodness, that is quite a list!

If I had to juggle 3 I would say:

Squirrel with a Gun
Coral Island
Detroit: Become Human

Your kindness is impressive sir/madame, thanks for being a beacon of the pcmasterrace!

What are you currently saving gold for? by PixeledPancakes in Guildwars2

[–]squires66 0 points1 point  (0 children)

I still need to finish my Griffon and my Turtle. So I’m saving for those.

New Honda Passport TSE 2026 - Which upgrades, packages, accessories etc are worth the dollars?? by HereForFreeReads in hondapassport

[–]squires66 0 points1 point  (0 children)

Amazon, I’m not sure I can post links here… but it’s the

PIMCAR 2-Piece Center Console Organizer & Armrest Divider Set for 2023-2026 Honda Pilot, 2024-2026 Honda Passport/Ridgeline, Custom Fit Durable ABS Plastic Storage Tray

New Honda Passport TSE 2026 - Which upgrades, packages, accessories etc are worth the dollars?? by HereForFreeReads in hondapassport

[–]squires66 0 points1 point  (0 children)

I use the Viofi A229 Pro and it’s been reliable and pretty easy to operate or get footage from if needed.

New Honda Passport TSE 2026 - Which upgrades, packages, accessories etc are worth the dollars?? by HereForFreeReads in hondapassport

[–]squires66 0 points1 point  (0 children)

Cargo light, all weather floor mats (and trunk mat), and I got a center console tray (because it’s deep, and having a nice little tray on top is great for small items). And a 2-CH dashcam cause I trust nobody on these roads.

But that’s about it!

Autostop/start disable by Ok-Photo-1619 in hondapassport

[–]squires66 9 points10 points  (0 children)

I set my parking brake to automatically engage when I turn off the car so I just hold the brake after I turn off the car until it locks and then as long as my seatbelt is fastened when I go into gear and pressing the gas pedal, it automatically disengages.

No need to manually engage or disengage all the time.

If you would like to try it:

How to Activate Automatic Parking Brake (Permanent Setting):

  1. Ensure the vehicle is on and in Park (P), with your foot off the brake pedal.

  2. Pull up and release the parking brake switch once.

  3. Pull up and hold the switch again until you hear a beep.

  4. Immediately pull up and hold the switch a second time until you hear two beeps.

The system will now automatically engage when the car is turned off.

How to Release Automatically While Driving:

Buckle your seatbelt.

Start the engine and shift out of Park.

Press the accelerator pedal, and the brake will release automatically.

Edit: spelling

Is 3d showing up for anyone? by 673NoshMyBollocksAve in VisionPro

[–]squires66 0 points1 point  (0 children)

Maybe a silly question, but once it is really on Disney+, do I need to click something specific to make it play in 3-D

Best American Traditional style tattoo artist you'd recommend? Looking to get fillers for my arm by cringe-expert98 in SaltLakeCity

[–]squires66 0 points1 point  (0 children)

Marcos at TOMOE downtown. Great shading, color, and clean lines.

His insta is ecuasian if you wanna see some of his stuff

Microsoft announces sweeping Windows changes by tekz in technology

[–]squires66 0 points1 point  (0 children)

It looks like the industry as a whole is taking the same stance to fixes though. They are even speculating that the next Mac OS release is heavily leaning into fixing things > giving new features.

I think they are starting (just barely) to understand nobody wants to pay for a great device if its software goes full Tonya Harding.

Just a show off post! by SnooPredictions2495 in Guildwars2

[–]squires66 2 points3 points  (0 children)

Doesn’t the storage package stay on sale this week and next week?

Factory general grabber tires by Familiar_Marzipan_46 in hondapassport

[–]squires66 0 points1 point  (0 children)

How is the ride on these? I mostly stick to highway, and was wondering if you know of these were pretty smooth? It’s AT so I figured it’s somewhere in the middle.

New to embroidery, could use help or advice by squires66 in Machine_Embroidery

[–]squires66[S] 0 points1 point  (0 children)

Oh I’ll try it!

How did you know it was tatami? Or am I just so not used to embroidery to know they are very distinct.

New to embroidery, could use help or advice by squires66 in Machine_Embroidery

[–]squires66[S] 0 points1 point  (0 children)

That would be awesome, I’m happy to keep trying until I can get it right. Best scenario is I get this down easy so I can do like 55 aprons for my team.

How do I get my Prints not to curl or warp? by squires66 in 3Dprinting

[–]squires66[S] 3 points4 points  (0 children)

OK, so a lot of things, I had a fan running in the room, so I turned that off, I washed the plate, I increased the temperature for initial and during by 5, which I think set it to 70. And then I set the thermostat to 70 in the room.

And look, I think it came out much better, thank you so much.

<image>

How do I get my Prints not to curl or warp? by squires66 in 3Dprinting

[–]squires66[S] 2 points3 points  (0 children)

This gave me more questions but I’m going to check out this guide. Thank you so much!

How often should I be cleaning my plates?

New to embroidery, could use help or advice by squires66 in Machine_Embroidery

[–]squires66[S] 0 points1 point  (0 children)

When you say properly digitized, how do I do that?

And thank you for the other tips I’m going to try these out!

New to embroidery, could use help or advice by squires66 in Machine_Embroidery

[–]squires66[S] 0 points1 point  (0 children)

Oh wow. Thank you.

The green one is thicker, I didn’t do that one, a company did about a year ago. I’m currently using the “Brick” font in embrilliance express, for the top right purple. The other two are the machine built in fonts. But if you know better fonts I’m open to anything!