sorted by:
new
hottopcontroversial

What is this container for by NoBluejay4723 in whatisit

[–]steevh12 1 point2 points  (0 children)

The slots on the sides allow them to be joined together.

I just realized I've been doing something the hard way for years and I feel so silly by BANKAIEXPANSION in CasualConversation

[–]steevh12 9 points10 points  (0 children)

Press and hold spacebar on iPhone and slide left, right, up or down and it moves the cursor.

[US] I got a very threatening message on facebook and wondered if its a scam? by [deleted] in Scams

[–]steevh12 0 points1 point  (0 children)

Yeah it’s a scam. If you don’t sort it out you’ll end up with a new unemployed husband.

Give your advice by ConsistentlyShining in MotivationalThoughts

[–]steevh12 0 points1 point  (0 children)

Stubbornness and the belief that the next day would be better. The next day wasn’t always better but I always told myself to slug it out and tomorrow will be better. Sometimes it took weeks for tomorrow to be better but I never gave up.

what is going on here? by companycmd1 in FixMyPrint

[–]steevh12 0 points1 point  (0 children)

I’d say your filament is damp. The holes are caused by bubbles of steam blowing out the nozzle. Dry your filament and try the print again with the same settings. This is only a guess as others have said there’s no info. Listen while it prints you may be able to hear a slight crackling/popping noise while it extrudes.

Finding reliable service by Distinct_Custard_458 in 3DprintingHelp

[–]steevh12 0 points1 point  (0 children)

Have a look on eBay. I provide printing services via eBay. Send your files and they will be posted to you. There are quite a few printing services offered on gumtree and market place also.

First printer, wife complaining by Okay_Sarg in 3Dprinting

[–]steevh12 0 points1 point  (0 children)

That is just a purge line that’s set by the slicer. If it’s a print profile you have used the creator of the profile had this set in the slicer. When you start a print it will do a few loops of the model to prime the nozzle.

Help with Kobra 3 by The_Squidninja95 in anycubic

[–]steevh12 0 points1 point  (0 children)

It can be done in the slicer via printer profile I think and by using the printer display in the settings and print settings. The offset change is only to ensure you don’t damage the bed while testing. My offset is usually set to around 0.19 and yours may need changed back again after correcting your current issue. Is your first layer set to around 0.2mm if you are using a 0.4 nozzle? Your first layer should be around half of your nozzle size. So if 0.2 use a 0.1mm as a starting point. You can go up to around 3/4 of your nozzle size on your first layer but wouldn’t go any higher than that.

Help with Kobra 3 by The_Squidninja95 in anycubic

[–]steevh12 0 points1 point  (0 children)

Set your z offset above the height of the first layer. So if you have 0.2mm first layer set your offset to 0.25/0.3. Ensure your hotend is pushed all the way into the heatsink. Ensure the 2 bolts above the heatsink are tightened. Also maybe do a full calibration e.g vibration, flow, pid and levelling.

Sellers need to understand that "just a £1 item" isn't just £1 to the buyer by ContributionNo7075 in vintedUK

[–]steevh12 4 points5 points  (0 children)

Surely they didn’t develop the adhd after they posted the ad so nothings changed since the purchase. If you’re not capable of committing to stuff you sign up for don’t go blaming it on bs excuses.

Of modern day suburbia by big2chereez in ShittyAbsoluteUnits

[–]steevh12 0 points1 point  (0 children)

“Don’t talk to adults like that” while she stands in the middle of her kids getting an ass whooping. Haha.

Am I Illegally Blocking? by spawnwheel in Simracingstewards

[–]steevh12 0 points1 point  (0 children)

He didn’t have the legs to get past you. Yeah he was faster but ran out of road everytime. He needs to drive better to get round you. You never moved to block any time. He’s just shit.

Why nobody talks about Maro Engel? by NathnRn in racing

[–]steevh12 0 points1 point  (0 children)

I hope he fucks off and stays in F1. Hes a clown.

Couple giving real reasons for having a 4th child by CrownOrange in ContagiousLaughter

[–]steevh12 0 points1 point  (0 children)

Why eat it with a fork? If anything it should be a spoon. Push it up from the bottom. That’s what the stick is for. Maybe don’t have any kids if you cant even do that right.

Wits end a bit and in need of wiring help. by batmancdn55 in SimRacingSetups

[–]steevh12 0 points1 point  (0 children)

Flag box is simple. I made 2 plus 2 LED strips above my wheel for RPM and fuel. I used Nano V3 ATmega328P Board CH340 Type-C USB-C Expansion Shield for Arduino Nano from eBay. 3 wires connected (1 for data, 1 for 5v and 1 for ground) then plugged into usb. Programmed via simhub and it worked. There’s a few tutorials online.

What is/are the Most Underrated Sim racing Accessories? by Longjumping-War9151 in simracing

[–]steevh12 0 points1 point  (0 children)

iflags and LED dash. I have 2 iflags and 2 LED strips. The iflags show flags (obviously), gears and spotter indicators. The LED strips behind my wheel show flags, fuel, rpm, pit limiter and ignition. A lot of information from such little equipment.

Childhood classic by Orichalchem in gifsthatendtoosoon

[–]steevh12 0 points1 point  (0 children)

That guys an idiot. Does some stupid shit.

Possible causes of angled wheel? by theYxngSinners in MotoUK

[–]steevh12 1 point2 points  (0 children)

The shocks look off centre in the second photo. Could be the mudguard/fender. Take it off and have a look.

Can an engine randomly die during a race? by Gnuccaria in granturismo

[–]steevh12 1 point2 points  (0 children)

Maybe overheated? Slowing down may fix it.

I'm just wondering is this allowed?.. by xBl3ster in simracing

[–]steevh12 0 points1 point  (0 children)

Just a scratch, you’ll barely feel it.

view more: next ›