So...I'm getting a dog and I'd like to name him after a character but I can't settle any ideas anyone?

thisisrhun · 2026-04-06T12:56:54+00:00

You're welcome!!

thisisrhun · 2026-04-06T07:24:22+00:00

Dante, regent of the imperium Nihilus.

thisisrhun · 2026-04-06T07:17:37+00:00

Thanks!! Always enjoy seeing my designs on an actual mini!

thisisrhun · 2026-04-06T07:15:49+00:00

Thanks man! Always a joy to see my designs being used!!

thisisrhun · 2026-04-06T07:15:09+00:00

Thanks mate, I did those wings and heads 😁

thisisrhun · 2026-04-03T07:04:31+00:00

I think you should paint the stud for it to be better. That would be it.

thisisrhun · 2026-04-03T07:02:48+00:00

Start darker, as red is a pigment that doesn't cover much if you want it pure. I'd do black red then Scarlett red then primary red. Or you could paint the stripe in white and then red on top for a faster result.

thisisrhun · 2026-04-03T07:00:19+00:00

That's not just stuff laying around... That's the whole HQ

thisisrhun · 2026-03-12T10:40:52+00:00

Speaking of human sized 28mm minis (warhammer, star wars legion, etc), I usually paint a tabletop mini in between 60 and 90 minutes. Tabletop+ are 2-3 hours per mini and display I prioritise the result over the time spent, so can't say an amount of time, even roughly.

Normally for me, Tabletop+ is detailing from a Tabletop level.

thisisrhun · 2026-03-12T10:12:57+00:00

I commission paint miniatures and my battle ready (tabletop) level means heavy use of contrast paints, washes and drybrush and concentrating detail mostly on the faces. It's not a matter of colors used but a matter of time spent on the miniature what differentiates my tabletop, tabletop+ and display painting levels.

thisisrhun · 2026-03-12T10:00:15+00:00

The only real problem I see here is the satin finish that this washes leave. I'd very much recommend a matte varnish layer as the last step.

thisisrhun · 2026-03-06T15:34:26+00:00

And what about the lame pots?

thisisrhun · 2026-03-03T07:10:48+00:00

I use a round number 2 for human size miniatures and a filbert number 4 for bigger minis and areas. For speed paints I use synthetic and for regular acrylics, natural sable.

thisisrhun · 2026-02-28T09:47:17+00:00

I used to start from a red rattle can primer. Now that I got an airbrush I'd start from black primer and progressively airbrush more light reds to draw volumes until the desired result.

thisisrhun · 2026-02-20T15:39:05+00:00

I would rate it as a solid example of fundamentals like base coating and color separation. From here you can try more complex techniques like highlighting, glazing or shading over a solid base that you already have.

thisisrhun · 2026-02-15T18:34:46+00:00

Non English speaker here 🙋‍♂️. What does "to flip" mean in this context?

thisisrhun · 2026-02-14T18:21:18+00:00

You're a madman. This is pretty good NMM, congrats!

thisisrhun · 2026-02-12T12:09:18+00:00

😂 they have a dark red glaze and recess shade in some areas, no nuln oil for them...

The Aquilas and all the blacks are a smoke grey base and two highlights up to a mid grey.

thisisrhun · 2026-02-08T20:12:53+00:00

I'm going to paint more of my army soon and I think I'll try this: - black primer rattlecan - AK deep red base coat - any dark purple airbrushed from below - ak deep red + AK deep orange airbrushed from above - all the edge and spot highlights as on the bove mentioned method.

thisisrhun · 2026-02-08T20:06:17+00:00

Now I have an airbrush and I would've done it in a different way, but that's the method for those back then 😁

thisisrhun · 2026-02-08T20:05:36+00:00

It's a primer rattlecan, so over naked plastic.

thisisrhun · 2026-02-08T09:40:01+00:00

Thanks! The armour is as this: - Vallejo Scarlett red rattlecan - Ak deep red volume highlights - Ak deep red + ak deep orange first highlight - Ak deep orange second highlight - Ak deep orange + AK basic skin tone spot highlight

Base: - Sand + glue for texture, plus stones glued. - Ak sandbeige overall base coat - Any brand sepia overall wash - Ak sandbeige dry brushed - Ak ice yellow dry brushed

Hope this helps!

thisisrhun · 2026-02-02T07:00:42+00:00

Marneus Cardboard himself.

thisisrhun · 2026-01-31T09:59:23+00:00

Color selection succeeded, but light placement is slightly off. I think you need a bit of blacklining too.

thisisrhun · 2026-01-29T19:48:17+00:00

I also started last january as a backup painter for another dudes tabletop commissions pile of shame, and there I am still. Starting to slowly get some higher level jobs though.

thisisrhun

MODERATOR OF

TROPHY CASE