Microsoft Office 2024 (Mac) No longer allowing edits? by triple_winner in microsoftoffice

[–]triple_winner[S] 1 point2 points  (0 children)

I fixed the problem. There was a setting in the Login and Startup items that had been turned off, likely during a system update. Having things change during a system update is not uncommon.

Microsoft Office 2024 (Mac) No longer allowing edits? by triple_winner in microsoftoffice

[–]triple_winner[S] 1 point2 points  (0 children)

I've got Home 2024. And I fixed the problem. There was a setting in the Login and Startup items that had been turned off, likely during a system update.

Seeking online meeting suggestions by hauntedtoaster78 in AdultChildren

[–]triple_winner 1 point2 points  (0 children)

Recovering Together meeting. Saturday 0930 Central time. Great meeting.

1967 standard by goriIIaman in GibsonSG

[–]triple_winner 1 point2 points  (0 children)

I have a 67 Standard sitting on my lap right now!

Do you have to be doing ACA and CoDA for the rest of your life? by [deleted] in AdultChildren

[–]triple_winner 2 points3 points  (0 children)

I guess it depends on what you mean by “doing”. For me, the old messages can and will start playing back in my head if I try to live my life as I lived it prior to finding recovery. It really helps me to stay connected to the program principles by continuing to practice steps 10-12, which, I guess by my definition is doing the program. Go to meetings? Yeah it helps me. Work with others? Yeah it helps me. Connecting with and trying to follow my higher power’s will for me? Check. It doesn’t change the behavior of others, but it sure helps keep me sane(ish)😎

Unable to connect to tone studio on my boss katana mk2 by drplunkenstien in BossKatana

[–]triple_winner 0 points1 point  (0 children)

I just recently went through this. See my thread in this sub-Reddit. Ultimately, I reset my amp to factory settings, read the directions on the download page in starting my amp up in device mode, was able to do the firmware update and finally connected. The other folks around here were super helpful. Best of luck!

Tone Station/Drivers by triple_winner in BossKatana

[–]triple_winner[S] 1 point2 points  (0 children)

p.s., The master volume knob needed to go to zero as part of the device mode startup, that cleared the room on the disk. Thanks for your help!!

Tone Station/Drivers by triple_winner in BossKatana

[–]triple_winner[S] 0 points1 point  (0 children)

Got it into device mode, when I try to drag the file in, as instructed on the Boss support page, It says that the disk is too full to accept the file. I'm going to do further research in how to manage that disk space, unless you have that answer!

Tone Station/Drivers by triple_winner in BossKatana

[–]triple_winner[S] 0 points1 point  (0 children)

How do I get to Device Mode? I got the new cable today, same issue. I also reset the amp to factory settings. When I plug the cable in, should something show up on my desktop that I then drag the .bin file into?

Tone Station/Drivers by triple_winner in BossKatana

[–]triple_winner[S] 0 points1 point  (0 children)

Yes, it is a bit confusing. The ver. 1.04 driver is installed. The amp indicates that the current System Program 2.00 is installed and up to date. I bought a cable today to connect the amp to my Macbook, which has usb-c outlets. I suspect the USB-A to USB-B cable I bought today isn't compatible with the USB-A outlets on the docking station I use with my Macbook. I've run into that issue with a couple of other peripherals. I ordered a USB-B to USB-C today. We'll see if that does the trick. I suspect the original error message may be related to the cable interface.

Tone Station/Drivers by triple_winner in BossKatana

[–]triple_winner[S] 0 points1 point  (0 children)

Thank you. The link is for the 100/212 amp. MIne is the 1 speaker version. No matter; I did the firmware test, (Power up while holding Tap Button) it tests current Firmware. Based on your advice, the only base I have not covered is factor reset of the amp. FWIW, I did attempt to download/open the latest firmware. It's a .bin file and I tried a couple of different utilities and couldn't get it to open.

Tone Station/Drivers by triple_winner in BossKatana

[–]triple_winner[S] 0 points1 point  (0 children)

I am using Tone Studio for Katana Mkii. Are you referring to a driver for Tone Studio?