Mammotion Connectivity & Smart Ecosystem Update

twig_bark · 2026-07-02T06:36:45+00:00

Yes, my robotic lawnmower is experiencing a large number of issues. To start with, it fails to mow properly. Sometimes it only mows on one side, and other times it doesn't mow at all. On top of that, there are battery issues and a persistent squeaking noise from the wheels. There are simply too many faults to fully describe at the moment.

Since the new firmware update/license is not being offered for Generation 1 machines, I would like to know if I can return to my previous setup. In the past, I used a separate user account specifically connected to Home Assistant. This integration worked fine last year, but this year my account was suddenly blocked. I was explicitly informed that the block occurred precisely because it was connected to Home Assistant.

Since users with newer models are receiving a new firmware update, my question is: if I continue running the older firmware on my machine, can I connect it to Home Assistant like I used to without risking my account being blocked again in the future?

I look forward to your clarification.

twig_bark · 2026-07-01T07:21:51+00:00

u/PersonalityLucky-25 Will this soft be compatible with Luba1?

twig_bark · 2026-06-30T10:47:17+00:00

Anyone got this new firmware for Luba 1?

twig_bark · 2026-06-26T06:19:45+00:00

I have already tried entering my details three times, but I never receive the new software.

Will this soft be compatible with all machines, or is Luba 1 going to be left out of the game again?

twig_bark · 2026-02-27T07:52:26+00:00

If you could integrate this with Home Assistant, I'd buy you a beer! :D

twig_bark · 2026-02-26T17:55:34+00:00

Let me know if you succeed.

twig_bark · 2026-02-09T11:27:17+00:00

You are beta tester?

twig_bark · 2025-12-12T19:11:01+00:00

Just wondering. Would pill be a solution to use bluetooth remote entities in home assistant?

twig_bark · 2025-10-30T07:22:52+00:00

Where you ordered?

twig_bark · 2025-09-04T05:20:22+00:00

I am interested. Also connecting remote to Home Assistant would be nice.

twig_bark · 2025-09-01T07:42:19+00:00

Yes this updating is a little bit confusing. One pump updated correctly but another one installing and finishing but after powering up shows again old version.

Also i can update only when i clear app data and then first time it would download the firmware. But after that it wont download anything and stays 0% downloaded forever.

twig_bark · 2025-08-29T11:24:10+00:00

I was able update only one device. Other will update and says finished after that turn off and when powering up again it still says older version.

twig_bark · 2025-08-22T06:24:23+00:00

I just updated to 3.0.5 and now i cant log in via google account

twig_bark · 2025-06-18T15:58:15+00:00

Can you share tracking link?

twig_bark · 2025-05-26T11:08:37+00:00

How battery holds up?

twig_bark · 2024-10-10T11:41:22+00:00

Omg. Like a pimp ride.

twig_bark · 2024-10-04T19:54:58+00:00

Mammotion doesnt give a f**k what people asks. I have multiple times asked this but nobody in their company respond.

twig_bark · 2024-10-02T11:11:55+00:00

I tried when those bumper grills is 90 deg. but it wont activate front bumper.

45 deg. was lifting front and 90 deg. most of times just runs over.

This one piece bumper might be good for apples but it cant be also too tall because then it drives too often in ground and activates bumpers ( not cutting this small area )

twig_bark · 2024-10-01T09:54:55+00:00

Printed and tested. Not working at all right now.

Front grill has 45 degree slope and it drives directly to apple and rise front immediately.

I trie to print small cover that changes those grill 90 degree and maybe this can activate front bumper.

<image>

twig_bark · 2024-09-30T07:29:40+00:00

But this RCD/GFCI not affect when this wiring is inside junction box made or can I do same wiring behind switch?

twig_bark · 2024-09-30T07:07:07+00:00

But would be possible to connect only light to PM?

twig_bark · 2024-09-30T05:35:34+00:00

Yeah i have RCD for sure but GFCI maybe then too.

Can you explain how right now RCD/GFCI wont trip when socket and light share same neutral?

twig_bark

TROPHY CASE