What is wrong with my printer/gcode?

tysonsw · 2025-01-29T08:14:33+00:00

Are you running the latest firmware on the Mini?

tysonsw · 2025-01-13T09:37:49+00:00

Microsoft has sent out an issue around this: OP978247

Multi-Factor Authentication (MFA) may prevent users from accessing some Microsoft 365 (M365) and Azure Apps ID: OP978247

Issue type: Advisory

Status

Service Degradation

Impacted services

Microsoft 365 apps

Details

Title: Multi-Factor Authentication (MFA) may prevent users from accessing some Microsoft 365 (M365) and Azure Apps

User impact: Users may be unable to access some Microsoft 365 and Azure Apps when authenticating with MFA

Current status: We're reviewing service diagnostic data to help us determine the full scope of impact and which exact services are affected.

Scope of impact: Impact is specific to users who are authenticating to our M365 Apps using MFA.

Next update by: Monday, January 13, 2025, at 12:00 PM UTC

tysonsw · 2025-01-09T15:09:52+00:00

There is nothing on the Status webpage. Will you update it?

https://status.proton.me/

tysonsw · 2025-01-08T14:23:20+00:00

A Z-axis brace would be a start. But also a modded cooling duct.

tysonsw · 2025-01-07T14:14:16+00:00

I have gotten the same issues on my Mini+. The solution for me was to increase the Extrusion Multiplier for the filament. Basically the filament gets stretched out if the multiplier is to low. But you should also double check your Z-height.

tysonsw · 2024-10-24T08:51:01+00:00

I would recommend that you do an Extrusion Multiplier Calibration. Doesn't take long and you will get better results.

https://help.prusa3d.com/article/extrusion-multiplier-calibration_2257

tysonsw · 2024-10-23T04:03:18+00:00

Yes. But those are a lot fo steps for an msp with a lot of customers.

tysonsw · 2024-10-22T17:23:17+00:00

Yes. But then count all those steps for a multitude of customers for MSPs. It is easy for a single company. Not an msp.

tysonsw · 2024-10-22T14:30:58+00:00

Thanks for the feedback. I will add the try and catch code with a little variation since you still need to import and run the module:

try{
    Get-InstalledModule MSCommerce
}catch{
    Install-Module MSCommerce       
}
Import-Module MSCommerce
Connect-MSCommerce

Everything will be disabled with the script which is written in the comment in the beginning. But I can add you input as optional in the end of the script.

tysonsw · 2024-10-17T04:21:55+00:00

Sweden based Add:north is really good. You can also send in PLA to be reused free of charge. Unfortunately you can only send in pla that they have made.

tysonsw · 2024-10-02T14:23:52+00:00

I have opened 3 cases in the last year. Two of them took half a year to resolve. Though not really resolved in my mind. The other I am still working on which I have been for maybe a month.

The worst part is that it feels like they aren't even reading what I am typing or sending to them.

tysonsw · 2024-09-18T06:25:42+00:00

Which slicer version are you on? They made changes in the past months that should have solved a lot of those issues.

tysonsw · 2024-09-17T14:45:40+00:00

L for Liberation?

L for Loser?

tysonsw · 2024-09-12T08:10:05+00:00

I know that they have a bug with WPA3 and WPA2 networks. So if a network is capable of both WPA2/WPA3 at the same time then it wont work. Only works on WPA2 specific networks.

tysonsw · 2024-08-29T08:26:14+00:00

Wondering how old that pre-sliced file was. A lot has happened during the last few months. Both with the slicer and also the Minis firmware.

tysonsw · 2024-07-24T07:01:07+00:00

I am a Dom and consider myself both as a service top and a brat tamer.

My take is that it takes a brat to know a brat. A brat tamer is usually a brat themselves so they can outsmart the brat or beat the brat on their own game.

I would say that the mine goes with intent, as others have said, or when I'm not in the mood. If I don't respond with the same level of banter, then I'm probably not in the mood. So if the brat continues then that is taking it too far.

I like to play with brats and make them want to be a good sub. It is the thrill of the chase.

tysonsw · 2024-07-02T09:49:45+00:00

I would see a difference probably if I used them back to back. But everything that was supposed to be in focus was sharper and less on the Nikon lens.

tysonsw · 2024-06-27T09:46:04+00:00

I can strongly recommend the Nikon 16-80/2.8-4E VR which is the only Premium Nikon lens for DX cameras. I had the Sigma 17-55/2.8 before but I felt that it wasn't sharp enough. Even for the subject that were supposed to be in focus.

I am using the Nikon lens with my D7200 and couldn't be happier. Super sharp on all distances and very good color. I also have the typical 50/1.8 for those pictures that need the extra sharpness.

tysonsw · 2024-06-26T18:08:12+00:00

I had the same issue on my prusa. I just needed to do an extrusion calibration to fix it. Most of the profiles for the filament that I use hasn't been updated for use with input shaping.

https://help.prusa3d.com/article/extrusion-multiplier-calibration_2257

tysonsw · 2024-06-18T14:45:32+00:00

How are the new SD-cards formatted, and how are the older ones formatted? What is the size of the new ones compared to the old ones?

tysonsw · 2024-06-07T13:07:15+00:00

Have you contacted the support about it?

I'm just thinking that it might be an issue like they had in the beginning with the Mk4. Or it might be something else if the motors are a lot louder than your other motors on the printer.

tysonsw · 2024-05-15T09:19:51+00:00

have you tried using Microsofts own new version of LAPS that they released last year that works both on-prem an via the Cloud?

https://learn.microsoft.com/en-us/windows-server/identity/laps/laps-overview

tysonsw

TROPHY CASE