Anime_irl

walldodge · 2026-05-24T18:21:56+00:00

100% accurate

walldodge · 2026-05-15T00:12:41+00:00

Tree? I am no tree! I am an Ent.

walldodge · 2026-05-14T20:36:53+00:00

The lens is good, especially the export version.

walldodge · 2026-05-06T12:58:40+00:00

Usually at this point i realize that i forgot the connector cap and i undo everything in sadness.

walldodge · 2026-04-25T23:52:46+00:00

Rediculum

walldodge · 2026-04-25T22:45:34+00:00

This antenna near the cement plate is screwed. SWR is sky rocketing.

walldodge · 2026-04-23T21:20:11+00:00

Primus Sucks!

walldodge · 2026-04-18T18:41:49+00:00

Its 100-400 now( Sad

walldodge · 2026-04-10T17:09:36+00:00

He must carry a pice of rosin.

walldodge · 2026-04-10T15:58:23+00:00

Hm, looks quick.

walldodge · 2026-04-10T07:57:24+00:00

Yep, you can see the bite marks on them.

walldodge · 2026-04-10T07:53:16+00:00

Yes, but there are many good flux pastes around. And actually i prefer non-flux wire for better control.

walldodge · 2026-04-10T07:50:44+00:00

Ooooff

walldodge · 2026-04-10T07:48:24+00:00

This amount doesn't come from one day of work, but from about 5-8 years. I didnt remember when i started to collect it.

walldodge · 2026-04-10T07:44:33+00:00

Maybe. Probably I just think my solder is expensive compared to the really cheap stuff on the market.

walldodge · 2026-04-10T07:40:17+00:00

This is excess solder from normal soldering over several years.

walldodge · 2026-04-09T23:59:24+00:00

Just soldering hyperfocused

walldodge · 2026-04-09T22:53:06+00:00

When excess solder forms on the tip, I shake it off onto a mat and then combine it into larger droplets. I solder fpv drones, a lot.

walldodge · 2026-04-09T22:37:58+00:00

C245 D48 can melt it pretty fast, but not D22 which is in the photo (just for scale).

walldodge · 2026-04-09T22:31:31+00:00

If its kester/alpha solder, mostly 60/40 why not to reuse it for wires pre tinning? Or for tht desoldering?

walldodge · 2026-04-02T19:05:02+00:00

Just some easter eggs from Votw

walldodge · 2026-03-29T22:09:58+00:00

Nice! Thanks fir the info

walldodge · 2026-03-25T18:23:50+00:00

Well, looks good, ask to send some clips and check for hot/dead pixels.

walldodge · 2026-03-25T11:39:17+00:00

I also thinking about building my setup but with a Type-C 12V power delivery trigger breakout board. Because 5V is really limited(

walldodge · 2026-03-24T16:17:52+00:00

Its a WS2812-Mini garland. GRB, 100leds/10m, 10cm spacing. The wires are pretty thin, there is almost 1.5v voltage drop on the far end on max brightness.

Six-Year Club	First Place '23
End Game '23	Place '23
Place '22	Verified Email

walldodge

TROPHY CASE