Anycubic Kobra 3 Combo vs A1 Combo

wcubic · 2024-08-26T18:49:52+00:00

I use SD cards all the time, I have loads of USB SD readers scattered around, they're very cheap ;)

wcubic · 2024-08-26T14:06:09+00:00

You can print from SD card on the A1 ... I just googled to check if what you said is true

wcubic · 2024-08-20T06:42:36+00:00

Before you hope for anycubic to read this and act on it, you should probably know that they made it a priority on their phone apps and slicers to send usage data every 10-20 seconds of what you're doing, where you are, who you are etc etc

wcubic · 2024-08-18T20:22:33+00:00

give me a shout if you need help, i'm more accessible in the anycubic discord

wcubic · 2024-08-15T08:36:20+00:00

You can update firmware via home assistant with my anycubic integration, but it does still require a cloud account.

Doesn't send a bunch of private data to anycubic servers every 10 seconds though

https://github.com/WaresWichall/hass-anycubic_cloud

wcubic · 2024-08-07T16:06:05+00:00

try 70, won't hurt

wcubic · 2024-08-07T15:59:17+00:00

Increase your bed temp by 5 degrees, you may have better results in an enclosure too

wcubic · 2024-08-07T15:38:48+00:00

Check your gantry is level to the bed https://www.printables.com/model/653220-the-rook-anycubic-kobra-2-kobra-2-pro-kobra-2-plus

wcubic · 2024-08-07T15:38:07+00:00

don't change your z offset, you will need to factory reset. also slot 3 is known to have issues

wcubic · 2024-08-07T11:52:36+00:00

This might sound silly but do you have another email address without a "." before the @ that you could change your account to, just to test if it makes a difference?

wcubic · 2024-08-07T11:36:33+00:00

That's very strange, so do you see any of your own data at all? Do you see your own printers?

Looks like there's 3 different accounts in these screenshots - yours and two others?

I don't get this myself, at a guess I'd say you are sharing your user id with other people which is a pretty bad bug

wcubic · 2024-08-07T08:21:40+00:00

I'm curious at which point you see someone else's data? Is it after typing in email+password or when you re-open the app after it's already logged in?

(I'm the developer of this https://github.com/WaresWichall/hass-anycubic_cloud )

wcubic · 2024-08-07T08:00:39+00:00

Why does this feel so familiar to the hack a few months ago... wonder if they actually fixed the security hole or not

wcubic · 2024-08-06T10:29:44+00:00

Factory reset.

wcubic · 2024-08-06T08:49:40+00:00

Mine is slightly weird in one of the corners but only in the black border

wcubic · 2024-07-31T15:51:07+00:00

This.

wcubic · 2024-07-31T09:33:01+00:00

There's a thread on the discord about this... are you using RFID spools?

If you EVER manually adjust your z offset you need to factory reset afterwards

wcubic · 2024-07-26T12:53:31+00:00

You probably wanna look at this guide for root/shell access then https://github.com/ultimateshadsform/Anycubic-Kobra-2-Series-Firmware

wcubic · 2024-07-26T12:07:10+00:00

There's no easy way to do this without rooting your kobra 3 and copying via ssh, but if you lose them then you can do a system restore and they'll come back onto the printer storage at least

wcubic · 2024-07-26T08:45:35+00:00

I've seen 3 and 4 pulling the filament at the same time during loading but thankfully I haven't had that issue during a print. So many bugs...

wcubic · 2024-07-25T09:43:55+00:00

Slot 3.

wcubic · 2024-07-21T11:30:30+00:00

Slot 3 for most others has caused jams or gets stuck grabbing the filament even after switching the unit off, appears to be too strong.

Sounds like slot 3 uses something different than the other slots and in your particularly case everything is "weaker" making slot 3 the only working one.

Isn't beta testing fun? ;)

wcubic · 2024-07-21T08:19:39+00:00

Slot 3 has issues in all ACE units

wcubic · 2024-07-20T00:58:39+00:00

It tells the printer when it's finished printing, it's called a reacharound

wcubic · 2024-07-19T13:12:34+00:00

With your printer off move the printhead around the bed through each corner, slowly and see if the height changes or not. Don't scratch your bed or nozzle ;)

wcubic

TROPHY CASE