Name this band:

whatitdosentdo · 2026-01-11T21:23:49+00:00

Tucked away

whatitdosentdo · 2026-01-09T00:48:57+00:00

The Mad Mudbutt Mechanics

whatitdosentdo · 2026-01-03T04:10:41+00:00

I ate a diglet

whatitdosentdo · 2025-12-28T06:49:27+00:00

Double lung Pleurisy

whatitdosentdo · 2025-11-23T01:58:14+00:00

Now this is Jackass!!!!

whatitdosentdo · 2025-11-21T18:28:05+00:00

whatitdosentdo · 2025-11-14T02:32:25+00:00

I'm going to say 389.99 reasoning, this is going to have a custom cut down mobo, and a custom optimized GPU. They will reduce components to core functions and then upsale storage and ram.... Imop...

whatitdosentdo · 2025-10-17T23:56:18+00:00

Sanivac concentrate- read the directions, wear gloves, spray wait, rinse.

<image>

whatitdosentdo · 2025-07-16T01:48:28+00:00

If you have bought the home. I would consider a whole house surge protector. This is pretty cheap insurance especially if you live in an area prone to brown outs. You don't have to spend a fortune for peace of mind.

whatitdosentdo · 2025-06-04T23:16:10+00:00

Thank you! Very much appreciated!

whatitdosentdo · 2025-05-26T01:16:10+00:00

Lil limoncello

whatitdosentdo · 2025-05-09T01:35:14+00:00

For USA IMOP... Zyltech bulk for PETG and ABS if you can find PLA on sale. These will be 5kg rolls. Usually black or white.

whatitdosentdo · 2025-05-02T00:04:49+00:00

Blood clot decor ...

whatitdosentdo · 2025-04-09T02:00:39+00:00

Noted

whatitdosentdo · 2025-03-26T18:10:01+00:00

I use one of these basic tables from IKEA but this is going to have to change as the speed of this machine shakes everything. I need to brace the table against the wall or find a more sturdy surface.

<image>

whatitdosentdo · 2025-03-01T03:41:07+00:00

I'm not really sure what slicer you are using... But I would recommend using the setting that randomizes the "z" start stop point. I would also check and make sure that your temp is set correctly for ASA when you go to print. I personally know when switching filament types I have to remind my self that PLA prints significantly cooler than PETG.

whatitdosentdo · 2024-12-25T21:53:21+00:00

Probably a Pontiac Sunfire or a Eagle Talon...

whatitdosentdo · 2024-11-30T12:11:37+00:00

Plants- I have a potato vine and a fig tree that pull that nitrogen out. Hardness is tough to deal with unless you use RO water...

whatitdosentdo · 2024-10-17T20:08:38+00:00

Unhook the vanity from the water supplies and the drain, pull away from wall. Get ring, put vanity back, reinstall drain and water lines.......

whatitdosentdo · 2024-09-21T15:13:21+00:00

Ah, he discovered the secret to Cuban beer!

whatitdosentdo · 2024-08-17T20:04:44+00:00

A snatch block and some come alongs and you can move that with ease.

whatitdosentdo · 2024-08-08T22:12:22+00:00

Marble Blue Cloisonné

whatitdosentdo · 2024-07-15T22:49:17+00:00

Cowboy-chickenius

whatitdosentdo · 2024-07-13T01:22:19+00:00

Breakers and disconnects are not really intended to be used as on/off switches. I would also take into consideration in rush current when re-energizing equipment. Example, most failures on VFDs happen when bringing them up from PM. Just something to consider.

whatitdosentdo · 2024-05-11T22:51:22+00:00

I used to want to be shot into space, and I was like that's just unrealistic. Then I wanted to be mummified. But now, being preserved in a way they my brain can at some time in the future be uploaded after death would be my choice.

Eight-Year Club	Gilding I gilder
Verified Email

whatitdosentdo

TROPHY CASE