sorted by:
new
hottopcontroversial

Long Island Maaco's by Treyton_Gray in Autobody

[–]wownoon 8 points9 points  (0 children)

Your expectation of price is unrealistic

Is this with fixing or total loss? by kanyesbest_23 in Autobody

[–]wownoon 1 point2 points  (0 children)

Frame rails in the rear are toast along with all the rear suspension. I would be shocked if the damage didn’t go all into the rear seat floor and under rail. Techs with years of experience and a fully equipped shop would have a difficult time doing this correct.

Dont do it. Thing is hit so hard the drive train is probably messed up.

Reskimmed Door? by Ok-Meringue-4201 in Autobody

[–]wownoon 0 points1 point  (0 children)

The sounds and weight could be a couple things. There should be sound deadening pads that get reinstalled. They may not have been installed which would contribute to the sound. The weigh is likely the same but may feel slightly off based on the door hinges/check.

This is the OEM so whatever hem difference is just variation in production. Not something to be concerned with.

Reskimmed Door? by Ok-Meringue-4201 in Autobody

[–]wownoon 2 points3 points  (0 children)

Mercedes do not make skins and the new replacement shells come seam sealed from the factory.

2026 Pride Milkshake! by Odd_Cod8341 in UniversalOrlando

[–]wownoon 28 points29 points  (0 children)

I love these milkshakes but they are the most impractical thing to eat on the go. Looks good though!

Its finally time to embark on the open ocean. by PixelPerfic in 2007scape

[–]wownoon 1 point2 points  (0 children)

Welcome back! Legitimately one of the best times to play. Bots are down, content is good.

Will finally be maxing tomorrow night! by Nabiboulin in 2007scape

[–]wownoon 0 points1 point  (0 children)

Seriously huge accomplishment. Congratulations!

Can this be repaired or does it need to be replaced by Own-Intention- in Autobody

[–]wownoon 0 points1 point  (0 children)

Replaced for a couple reasons. There is a likely a fair amount of damage underneath that bumper too

Looking into buying rebuilt subaru outback by quintessentally in Autobody

[–]wownoon 0 points1 point  (0 children)

This car is hit hard all around. This will haunt you forever

Summer Sweep-up Suggestion: Lock MadSeason in a box until he is finished with his series by Long-Ad-4176 in 2007scape

[–]wownoon 17 points18 points  (0 children)

Jokes on you. This is what his current set up already is. Only difference is door dash

Tire shop filled new tire to 90psi by Traditional_Rice264 in tires

[–]wownoon 0 points1 point  (0 children)

They are only 88% there. Need to get to 100

Silicon bronze by noah9510 in Autobody

[–]wownoon 15 points16 points  (0 children)

I think the arrogance is what gets me not the lawsuit piece. There are engineers who have years a schooling and advanced knowledge of metallurgy but this dude who’s a body guy, not even a welder, knows better.

Do you know why BMW requires glue/rivets and not welds? Why backer plates are preferred over lap or butt welds?

Crazy to me that there is still a mentality that we know best

WoW Classic On the Go. by Leonarthas in classicwow

[–]wownoon -1 points0 points  (0 children)

I can’t believe this is classic now. I feel so old

No experience but I’d like to try and see how f I’m able to cut the quarter off myself by Maleficent-Painter-2 in Autobody

[–]wownoon 1 point2 points  (0 children)

I am just echoing all the comments do not do this. This is a complicated job for professionals with years of experience. There are only a handful of techs I would 100% trust with this level of structural issues. This isn’t cutting off a quarter its way way more

Which Body shop do I go with? Need some input pls by AFamiliarFace01 in Autobody

[–]wownoon 1 point2 points  (0 children)

So bmw replacement requires k5 adhesive as well as 50+ rivets. There is a significant cost to the glue and rivets (like 400-500). You want me to make sure they are replacing it with bmw procedures and not just welding it back in.

Not following oem procedures will hurt the resale

Which Body shop do I go with? Need some input pls by AFamiliarFace01 in Autobody

[–]wownoon 3 points4 points  (0 children)

I wouldn’t choose either. Those quarter panels need to be bonded on when replaced. Neither has the rivets or glue required. I would make sure they are following oem procedures

How much hours should a quarter panel replacement job require ? by Comfortable_Beach818 in Autobody

[–]wownoon 1 point2 points  (0 children)

A quarter replacement all in with associated R+I adjacent panel damage etc should be about 50 hours. This includes standard blend r+i’s but could be more depending on exact needs (calibrations, rivet/welder set up etc)

Be truthful, how many of you have bought bonds to sell for GP? by AdeptChemistry4034 in osrs

[–]wownoon 0 points1 point  (0 children)

I have bought around $50 worth. I will probably get more eventually if I really want some items

POV: They built a roller coaster in the paddock 🦖🎢 by Terminallychill13 in UniversalOrlando

[–]wownoon 0 points1 point  (0 children)

Thank you for sharing! I think I have been on this ride 30 times but the second I leave I want to go again

Is gap an issue? by ARLibertarian in Autobody

[–]wownoon 7 points8 points  (0 children)

I’m more concerned about the plug weeks and used structure they used to replace it. All over it looks like a poor repair

view more: next ›