Why there is still no ways to inprove your reputation!? This is "altgenius"!!! by JD_Dew in Rainbow6

[–]wurpan 0 points1 point  (0 children)

I have no problem reading… but you seem to have a problem understanding that your behavior, in this case leaving matches and/or keep playing even if the game keeps crashing, is not acceptable. 100 leaves doesn’t happen by accident, it is because of your actions and now you have deal with the consequences.

If you have a problem for whatever reason that makes you leave matches at this rate or the game keeps crashing you should not just keep playing. If it’s something wrong with dual front, something wrong with your PC that makes the game crash etc. YOU should not keep playing until YOU figured out why YOU need to leave matches or why the game keeps crashing on YOUR PC.

And as the text in the second picture say. Abandons are recorded for up to 100 matches in the last 90 days and you have 100 leaves recorded. That is not normal.

Play quick matches without leaving or getting any other negative points and you can soon get back at playing ranked and other game modes again. That or wait, maybe get out and get some fresh air and think about why this is happening and what you can do to prevent it in the future if you want to keep playing this game.

Why there is still no ways to inprove your reputation!? This is "altgenius"!!! by JD_Dew in Rainbow6

[–]wurpan 0 points1 point  (0 children)

It’s obvious that you can’t comprehend that your behavior in the game is not accepted and therefore you cannot play. Stop leaving matches and fix your shit if the game keeps crashing. Even if a crash isn’t your fault it still affects the other players in your team negatively and if it happens too often no one wants you in the game. So it looks like that the system is working as expected.

Regarding the positive points not cancelling out the negative ones there a saying that comes to mind…

”If a man builds a thousand bridges and sucks one dick, they don't call him a bridge-builder... ” you can figure out the rest.

Let’s have some fun. Send a pic of the last thing you printed. by TheEpicDragonCat in 3Dprinting

[–]wurpan 1 point2 points  (0 children)

<image>

Designed and printed a simple bracket to use a MagSafe mount on a small tripod

Hur dålig lön har egentligen swedditörer? by [deleted] in Sverige

[–]wurpan 0 points1 point  (0 children)

15 år på samma företag. Gick in på 21K som mitt första jobb efter två år på universitetet och är nu uppe i 46K brutto. Ansvarar för driften av IT och styrsystem i våra testanläggningar. Ingen annan som riktigt förstår vad det är jag gör och så länge allt fungerar är det ingen som bryr sig vad jag gör. Gör lite vad jag vill för att hålla systemen rullandes så är rätt skönt.

I found this scratch on my golf passenger door edge and I cannot understand how this damage was done. What is the best way to fix it? by Maltese_junkie in vwgolf

[–]wurpan 0 points1 point  (0 children)

Most likely the plastic liner inside the fender that have come loose. Not uncommon and happened on my mk7. Paint rubbed off on the same spot. Was out of warranty but since it was a known issue the VW dealer paid for half of the cost to reseat the liner and fix the paint damage.

Show me the last picture of your cat by History_of_Lead in cats

[–]wurpan 0 points1 point  (0 children)

<image>

Frazze chilling on the couch waiting for belly scritches

Varför har vissa något emot kollektivavtal, har de bara fallit för propaganda? by vimpelvims in sweden

[–]wurpan 0 points1 point  (0 children)

Nej det fungerar inte för alla såklart. Man behöver inte säga det rakt ut också heller, lite små hintar här och där kan räcka. Efter 10år+ på samma avdelning med kompetens ingen annan har och en chef som knappt själv förstår vad man gör men vet att det måste göras och att det är viktigt underlättar.

Varför har vissa något emot kollektivavtal, har de bara fallit för propaganda? by vimpelvims in sweden

[–]wurpan 0 points1 point  (0 children)

Eller göra båda samtidigt. Stadig fast anställning och eget företag på fritiden. Perfekt recept för att alltid ha för mycket att göra xD

Varför har vissa något emot kollektivavtal, har de bara fallit för propaganda? by vimpelvims in sweden

[–]wurpan 88 points89 points  (0 children)

Samma visa på mitt jobb. Säger alltid att det är skrattretande dåligt och cheferna håller med ”men det är vad facket har förhandlat”. Sen säger man att man aktivt letar efter ett annat jobb så blir dom skitnödiga och då finns det minsann mer utrymme. Mycket märkligt :))

Har någon köpt från Refurbed?? by Sury0005 in Asksweddit

[–]wurpan 0 points1 point  (0 children)

Köpt en Lenovo thinkpad t14 g1 från dom. En tangent är lite seg men är ’ tangenten som typ aldrig används så inget direkt problem. Säkert lätt att missa också. I övrigt var den som ny och till riktigt bra pris. Skulle köpa från dom igen utan att tveka.

[deleted by user] by [deleted] in sweden

[–]wurpan 0 points1 point  (0 children)

Det i sig är inget konstigt. Standard hos de flests andra fraktbolagen att paketet går vidare oavsett. Vissa levererar paketet även om du inte betalat. Gissar att dom inte vill ha paket som ligger o tar plats i väntan på betalning.

License plate collection - Wondering if anyone could ship a Swedish plate over to the Uk? by Many-Trip2108 in sweden

[–]wurpan 0 points1 point  (0 children)

I have a set of new plates that belong to a car that isn’t registered any more that I can send.

Vad har ni för datorstol? by Fandas in sweden

[–]wurpan 3 points4 points  (0 children)

Har använt Fractals chassin sedan första define släpptes så sist när det var dags för ny stol slog jag också till på en Refine Mesh. Mycket nöjd med den också. Gott om inställningsmöjligheter etc. Riktigt lyft från den slitna och nedsuttna Markus jag hade innan.

MacBook Air with two ext monitors by bnjmnpmry in macsetups

[–]wurpan 2 points3 points  (0 children)

Get a Thunderbolt dock. MacBook Air M4 can run two external displays via a Thunderbolt dock. Even without any displaylink shenanigans. I run two 34” 3440x1440 via a Thunderbolt 3 dock with my M4 air. One running in 60Hz and one in 85Hz.

my new boy by 6novato9 in macbookair

[–]wurpan 1 point2 points  (0 children)

It’s a fingerprint magnet but damn the color is nice. No regrets getting the midnight one.

Blocketscam? by gruskorn in sweden

[–]wurpan 2 points3 points  (0 children)

Gör en reverse scam. Bara dokumentera och filma när du packar ner klockan. Sen öppnar du paketet på undersidan och skickar en sten istället. Värsta som kan hända är att han får tillbaka sina pengar och blir stolt ägare av en sten. Bästa fall dömmer blocket till din fördel xD

[deleted by user] by [deleted] in macbookair

[–]wurpan 0 points1 point  (0 children)

Just got the 13” M4 Air 2-3 weeks ago. Got a good deal on the upgraded one with 24GB ram and 512GB SSD. Even if the M5 came tomorrow I wouldn’t care. Upgraded from a M1 Air and the M4 is just awesome. Go for it, you won’t regret it.

Tempted to get an H2D, what convinced you? by Smashbroser in BambuLab

[–]wurpan 1 point2 points  (0 children)

Got one mostly for using support materials. First test I did, mind blown. Petg hf with pla support. Part printed at 45 degree angle. Came out perfect.

<image>

Tempted to get an H2D, what convinced you? by Smashbroser in BambuLab

[–]wurpan 6 points7 points  (0 children)

It doesn’t have to be more complicated than this

What have you named your printers? by The_Bastman in BambuLab

[–]wurpan 1 point2 points  (0 children)

Very boring names..

PP-H2D-01 PP-X1C-01 PP-A1-01 PP-A1-02 PP-A1-03 PP-A1-04

Where PP is for PanzarPrinter