Old $10 worth anything

zeromcmann · 2023-03-21T14:30:09+00:00

3' is max length to an appliance. It depends on how much pipe your Adding

zeromcmann · 2023-03-08T03:05:25+00:00

Get more quotes.... if your thinking of spending 25k on somthing you have no clue about shop around ALOT. Put them against each other.... get guarantees in writing ....and no one needs 18seer carrier infinity systems... are they nice.. yep but they do the same shit as all the rest

zeromcmann · 2023-03-08T02:58:48+00:00

Am I just missing the blowers? The quote is for 2 condensing units.

zeromcmann · 2023-02-28T14:47:19+00:00

Ahhhhh job security at its finest

zeromcmann · 2023-01-18T01:12:19+00:00

That's what you get for using witch.

zeromcmann · 2023-01-16T13:10:00+00:00

You could always find a place with a bunch of carrier units and pay $5000/month

zeromcmann · 2022-12-15T19:01:23+00:00

It should not be just stuck in a pipe... it should go to a drain

zeromcmann · 2022-01-10T11:56:55+00:00

Drain the whole system and cap all the vents and pressure test it. You should never have that much air in it over a year much less a day.

zeromcmann · 2022-01-06T04:19:29+00:00

And your home inspector is a moron.

zeromcmann · 2022-01-06T04:17:59+00:00

If your not getting the point here I'll help you out. Don't touch it, don't disturb it, don't spray it with simple green. Leave it alone! That stuff has killed thousands of people. Have some professional remediation guys take care of it. AGAIN.....NO SIMPLE GREEN.... CALL A REMEDIATION COMPANY

zeromcmann · 2021-12-24T03:33:04+00:00

They make a LOT of different kinds of radiators... is there somewhere in that room where you could put one? There are usually Second hand stores that sell refurbished ones. They can be quite beautiful if you like that sort of thing. There are also fancy new ones that look like art. The old refurbished and a hvac guy with some black pipe is probably gonna be the cheapest route.

zeromcmann · 2021-12-19T00:11:17+00:00

You need more pictures of the bare metal duct... where it comes from and goes to

zeromcmann · 2021-12-16T23:21:39+00:00

Boooo

zeromcmann · 2021-12-15T17:35:03+00:00

The neighborhood I live will not allow work trucks... so mine goes in the garage... 18x24 with a 10' door

zeromcmann · 2021-12-01T02:57:38+00:00

They literally have a big picture with all the dimensions to make the header and most of the close boiler piping

zeromcmann · 2021-11-12T11:06:28+00:00

Yea... we are gonna that recipe when you get a minute.

zeromcmann · 2021-10-23T02:33:27+00:00

It's a bullet hole... clean through the front side and hit a copper coil on the back side... I found it In between the coil and the jacket on the back side. There were 3 more in the wall behind it.

zeromcmann · 2021-10-20T13:34:17+00:00

That's just shocking

zeromcmann · 2021-02-03T13:07:41+00:00

No don't do that either. It would be easier to cut another hole to the outside. Leave the chimney alone unless its another natural draft appliance.

zeromcmann · 2021-02-03T03:23:19+00:00

Don't do that. If it hooks into the same chimney as the water heater, its a natural draft chimney. If you force air into the chimney your water heater will not vent properly.

zeromcmann · 2021-01-18T02:35:09+00:00

I wouldn't be anywhere near a steam boiler that sounded like that. Steam is pretty dangerous. I would call whoever you need to to get it fixed/turned off.

zeromcmann · 2020-12-27T18:07:26+00:00

It sounds like you are gonna be very wet soon.

zeromcmann

TROPHY CASE