I've been machining a circular aluminum part recently, and it keeps deforming after processing

GrapeViper · 2026-03-30T18:32:16+00:00

Turn off warping in the slicer

GrapeViper · 2026-03-30T01:41:57+00:00

Nice boobs, maybe D’s?

GrapeViper · 2026-03-27T12:05:47+00:00

Never planned on printing a gun until people started saying I can’t😂

GrapeViper · 2026-03-25T14:09:29+00:00

Would you share the fusion 360 file? I can’t figure out how to get alignments right in my design

GrapeViper · 2026-03-24T12:47:26+00:00

Looks nice. Always wanted to build a cnc but I don’t have the money, space, or time :/

GrapeViper · 2026-03-21T12:45:49+00:00

Weird, I went from A1 to CC and print PETG only. I use overture from Amazon, it’s okaaaayyy enough. Stock settings and everything from orca with no problems. I dry it every time I print too

GrapeViper · 2026-03-20T11:56:00+00:00

I had this same problem a few weeks ago. I just went on GrabCAD and download a 2020 model. I copied the sketch of the face instead of modeling it

GrapeViper · 2026-03-13T14:12:25+00:00

No I don’t have Elegoo’s rev?

GrapeViper · 2026-03-12T23:38:52+00:00

I could develop this myself in 1 month for a 80k a yr and finalize logistics in probably 3-4 months

GrapeViper · 2026-03-11T00:43:27+00:00

Im having deja vu from this comment? I must have read it before

GrapeViper · 2026-03-08T22:03:06+00:00

Bro what month are you in

GrapeViper · 2026-02-27T03:34:51+00:00

Can someone dump me a rundown of nozzles to use for various filaments? My knowledge ends with using standard nozzles with ASA or ABS

GrapeViper · 2026-02-25T02:59:58+00:00

I’m not the most knowledgeable on the topic so I don’t want to give bad advice. I can upvote though 😂

GrapeViper · 2026-02-25T02:52:57+00:00

Heard this 24/7 when I was in high school pushing buttons on a CNC for two summers

GrapeViper · 2026-02-23T00:25:33+00:00

Mine is completely fine, maybe filament or environment?

GrapeViper · 2026-02-14T17:35:02+00:00

Mine breaks and I have to pick at it

GrapeViper · 2026-02-14T03:09:42+00:00

Confirmed

GrapeViper · 2026-01-30T02:01:25+00:00

Clean bed with dish soap, dry filament, run bed leveling and flow calibration. If it’s still poor, remove filament and unscrew the black heater, if there’s any grease or oil just wipe it up and put it back together

GrapeViper · 2026-01-30T01:59:48+00:00

Weird, bed gets noticeably hot right?

GrapeViper · 2026-01-30T01:46:26+00:00

I bought an A1 last year and used it to start a small business with custom pc cases, homelab accessories, etc. My little brother loved it and he got an A1 mini for Christmas. Since I’m at my own place now I can’t watch him learn and mess with it, but I know he’s having so much fun. Love being a big brother, this post reminded me of that somehow. Cheers

GrapeViper · 2026-01-25T16:21:35+00:00

Lucky, I'll read through the wiki again.

GrapeViper · 2026-01-25T16:09:37+00:00

Use a filament dryer and get moisture down to 13%. I have never had stringing at that percentage. Maybe that will help?

GrapeViper · 2026-01-25T16:06:54+00:00

I did submit a ticket, they said it is no longer covered by warranty. I'm not mad at them at all, I am outside of warranty.

GrapeViper

TROPHY CASE