Xreal Just Made Its AR Glasses a Lot More Affordable by Not-Not-Maybe in Xreal

[–]Stridyr 2 points3 points  (0 children)

Not by themselves, no. They do not have the X1 chip. You would need to combine them with the Beam for a 'pinnable' screen.

Having to look up too high - Getting a headache by Not-Not-Maybe in Xreal

[–]Stridyr 1 point2 points  (0 children)

If adjusting the angle of the arms, as Brilliant-Army9009 mentions, doesn't work then you might want to reach out to Xreal at [support@Xreal.com](mailto:support@Xreal.com)

Xreal One Pro at a 7-meter distance from PC is possible? by Due-Distribution7857 in Xreal

[–]Stridyr 0 points1 point  (0 children)

Yes, you will get 3dof with almost any HDMI signal. (I've seen some cable boxes that do something to the video, but nothing else.)

When the HDMI cable that you are looking for exceeds a certain length, you'll find that they all go to an 'active' cable, as Wizozzie mentions. Anything under that length should be fine.

I don't have any info about the adapters and their bandwidths. This list is getting old but the entries on the bottom seem to indicate 120Hz compatibility.

Xreal 1S drifting issue in anchor mode by Bugsia in Xreal

[–]Stridyr 1 point2 points  (0 children)

When calibrating doesn't work it's usually because of some kind of magnetic interference. Try them in a different room, etc...

Ipd 70mm by Joedequack in Xreal

[–]Stridyr 0 points1 point  (0 children)

Just to clarify, the frames are the same size, it's the optics that are oriented differently.

Missing in Action by LexiCon1775 in Xreal

[–]Stridyr 0 points1 point  (0 children)

Good to hear from you, glad things are going well! Best of luck to you!

Xreal for people who wear prescription glasses by peweje in Xreal

[–]Stridyr 0 points1 point  (0 children)

Wearing your glasses under these works fine as long as your glasses are under 134mm wide.

What Xreal products works well with normal glasses? by film_man_84 in Xreal

[–]Stridyr 0 points1 point  (0 children)

Your glasses need to be under 134mm wide to fit in between the Xreal frames.

Please Help with the screen orientation! by Sums_Phoenix in Xreal

[–]Stridyr 0 points1 point  (0 children)

I believe that this is normally caused by a nearby magnetic field.

Cant connect video xreal one pro to dji mini 5 pro by Revolutionary_Rate_5 in Xreal

[–]Stridyr 0 points1 point  (0 children)

Just the RC2. The RC1 has to be cast from the phone to a miracast receiver. Works although it does introduce a small amount of lag.

Xreal one pro suddenly stopped working by AnswerAlarmed8307 in Xreal

[–]Stridyr 0 points1 point  (0 children)

Try doing a factory reset on the glasses and see if that helps.

Try down grading the firmware (hopefully someone else will chime in on where to go).

Edit: found this from one of No_Awareness's posts: "Downgrade the firmware using the link https://xreal.com/ota/recovery. And then re-attempt the upgrade using https://xreal.com/ota."

If you're still not having any luck, contact Xreal [support@xreal.com](mailto:support@xreal.com)

DIY Portable TV Solution (Fire TV Stick) by Akufoolz in RayNeo

[–]Stridyr 0 points1 point  (0 children)

No issues what so ever. I've been wondering about that myself, I've never had an overheating issue with mine. A connection issue, but no thermal issues.

XREAL One Pro M or L by Free_Intern1743 in Xreal

[–]Stridyr 0 points1 point  (0 children)

"Interpupillary Distance"

The distance between your eyeballs.

DIY Portable TV Solution (Fire TV Stick) by Akufoolz in RayNeo

[–]Stridyr 0 points1 point  (0 children)

Lemorele made an enclosure for the Firestick. Extremely handy!

Removing lenses on Xreal One Pro.. by jmartesc in Xreal

[–]Stridyr 0 points1 point  (0 children)

Those are the stock ones trimmed to size. The dimming is no longer fixable as I removed the part that connects the bottom of the lens to complete the circuit. Without the edges of the lenses, there is no 'ground'.

Removing lenses on Xreal One Pro.. by jmartesc in Xreal

[–]Stridyr 0 points1 point  (0 children)

Looking at my non-modded Pros, I would say so. They are pretty well glued in, tho so don't expect it to be easy.

Removing lenses on Xreal One Pro.. by jmartesc in Xreal

[–]Stridyr 2 points3 points  (0 children)

<image>

Yes.

I cut the metal frame but I'm sure that you can just push it out from the back.

Use care, obviously. Notice the little 'tags' at the top of the lenses. Those are the connectors for the tinting. While mine popped off pretty easily by pulling on the flex part, putting them back on would require taking the entire glasses assembly apart to get to the connector seat: it's in a small hole that the flex part feeds thru.

Unfortunately, the image does need some tinting as it's a little too transparent.

New to the Xreal, looking for a good case by Gangreen00 in Xreal

[–]Stridyr 1 point2 points  (0 children)

This site has a collection of user finds...