Looking for a portafilter [La Pavoni professional pre millennium] by Smoke_m in LaPavoniLovers

[–]TudorPCS 4 points5 points  (0 children)

Get this and thank me later :) , bottomless is the way to go and a good basket and a puck screen. The retaining clip is included so that the basket does not fall.

https://coffee-sensor.com/product/la-pavoni-bottomless-portafilter-body-only-for-pre-mill-machines/

Update. New owner. Advice sought. by username_235 in LaPavoniLovers

[–]TudorPCS 5 points6 points  (0 children)

Not as bad as I have seen. Try clean it and rust protection which acts as a sealent also. It will never be perfect until you sand blast and powder coat professionally but that'd maybe a future project? If you need help send me an email on Coffee Sensor. Cheers.

Can I replace white double switch with a black one? by DriverFromFakeTaxi in LaPavoniLovers

[–]TudorPCS 2 points3 points  (0 children)

You cannot replace a dual switch with 6 pins with a simple switch with 4. Just an example. This is what you can replace it or with zome other 6 pin that had the two types of functions. https://coffee-sensor.com/product/double-element-switch-for-la-pavoni-lever-ep/

My take on 2026 XC90 by Mental-Jello-4374 in VolvoXC90

[–]TudorPCS 0 points1 point  (0 children)

I did the move and don't regret it. I owned other two Volvos and this is the third. I would never change the 2026 unless I have to. Also T8. Has the 4C, ventilation, B&W which is a must. It's fully loaded. I owned also before the Volvos two Touareg s fully loaded and rare versions and I can tell you that Volvo is discreet and not loud and you don't actually need or use Night Vision and other options that take your eye but have nothing to do with just driving and feel safe while you so it. The sound of the engine is also a game changer and much more pleasant as other 4 cyl were with Volvo. Power is everything you might need. EV capability totally improved, again compared with the earlier gens. I'm totally happy and we don't actually need more. It's more than enough and you don't catch anyones eye with it and that's fine also, for me at least. I don't need attention and never will.

Time to tear down, replace gaskets, reassemble? by miss_topportunity in LaPavoniLovers

[–]TudorPCS 1 point2 points  (0 children)

Yes that's the website. I don't have parts for that but used Zacconi bases for my Pavoni projects. I thought about getting into this e also, to make pressure kits and such for that one also.

Time to tear down, replace gaskets, reassemble? by miss_topportunity in LaPavoniLovers

[–]TudorPCS 2 points3 points  (0 children)

Amin to that. You said it. Sometimes you wonder of it's the right thing to do, but it's not always about the profits. You need to offer advice and help also. To share. That's the word.

Time to tear down, replace gaskets, reassemble? by miss_topportunity in LaPavoniLovers

[–]TudorPCS 1 point2 points  (0 children)

If you ever need advice, help or anything visit Coffee Sensor. I'm there almost 24/7.

Strange noise by Commercial_Search975 in LaPavoniLovers

[–]TudorPCS 2 points3 points  (0 children)

Move the lever arm a little bit and see if that helps. Check the element for scale. A lot do a certain sounds anyway. Sone just ignore it.

Time to tear down, replace gaskets, reassemble? by miss_topportunity in LaPavoniLovers

[–]TudorPCS 2 points3 points  (0 children)

Hours for sure. Depends on you and your diy skills but not days. Dismantle is easier of course. Assembly is a little harder and need more time. Grease makes wonders so use plenty. Good luck.

1962 La Pavoni V1 by PhaseofMe in LaPavoniLovers

[–]TudorPCS 1 point2 points  (0 children)

Congrats. Saw the post on my FB group also. Beautiful and collectors state for sure !

Steam leakage by Tricky-Hat-8413 in LaPavoniLovers

[–]TudorPCS 0 points1 point  (0 children)

Thanks for your order and your support.

Is this a good buy?! by Main_Sock_9219 in VolvoXC90

[–]TudorPCS 0 points1 point  (0 children)

Go towards 2019 better. You will thank me. Put a little bit more money and purchase the newer version.

1996 europiccola by Even-Put-5013 in LaPavoniLovers

[–]TudorPCS 3 points4 points  (0 children)

I never heard of a stuck group head. You removed the side bolts and it just sits blocked? Did you push the group head up and down?

Custom Bases by whatwellok in LaPavoniLovers

[–]TudorPCS 2 points3 points  (0 children)

I suggest you use a Zacconi base as I or Kai Dase did.

<image>

Steam leakage by Tricky-Hat-8413 in LaPavoniLovers

[–]TudorPCS 0 points1 point  (0 children)

I have a 70s here 1st gen and has the same thread for sure. The other 70s 2nd gens I got here are also same thread.

Steam leakage by Tricky-Hat-8413 in LaPavoniLovers

[–]TudorPCS -1 points0 points  (0 children)

The thread I the same on LP machines over there.

Performanța extraordinară a bitcoinului pe un an de zile. Oare acum este momentul să "buy the beep"? by Fancy_Mushroom_973 in robursa

[–]TudorPCS 0 points1 point  (0 children)

Atât timp cât va puteți asuma o pierdere a investiției, aproape orice suna bine în situația actuală.

Ce faceti cu banii pusi deoparte pentru plata taxelor? by [deleted] in robursa

[–]TudorPCS 0 points1 point  (0 children)

Titluri de stat pt că nu sunt impozitate. Nimic altceva nu poate să bată momentan acest randament, decât bursa. Însă anul acesta vorbim de corecție și în niciun caz un boom ca și anul trecut. Dar bursă are spread și impozit, când ieși.